torque AUDI A4 1999 B5 / 1.G Cruise Control System Workshop Manual
Page 4 of 10
27-50
Cruise control, control module -J213-,
removing and installing
Follow the sequence of operations below:
- Remove glove box.
Repair Manual Body Interior, Repair Group 68
- Detach control module -1- by removing Phillips-head screw -3- from
clip nut -2-.
Tightening torque: 3 Nm (27 in. lb)
- Withdraw control module from mounting bracket and disconnect
harness connector.
Pa
ge 4 of 10 Cruise control s
ystem, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.4
Page 6 of 10
27-52
Actuator, removing and installing
Depending on the engine, the installation position
of the individual actuators can vary.
Follow the sequence of operations below:
- Remove vacuum line.
- Unscrew or unclip linkage.
- Disconnect actuator from bracket (arrow).
Tightening torque: 25 Nm (18 ft lb)
Pa
ge 6 of 10 Cruise control s
ystem, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.4