AUX AUDI A4 1999 B5 / 1.G Mechanical Throttle Control Servising
Page 4 of 18
20-189
Vehicles with automatic transmission,
checking adjustment
Test and auxiliary equipment required
Fluke 83 Multimeter
VW 1594 Adaptor kit
- Disconnect 2-pin harness connector from kick-
down switch.
In engine compartment on firewall.
- Connect multimeter between kick-down switch terminals using jumper
wires from VW 1594 adaptor kit.
- Measure resistance across switch.
Specified Value:
- Slowly depress accelerator pedal until Wide Open Throttle is reached.
If properly adjusted, following conditions will be met:
Shortly after kick-down point, resistance must drop to 0 Accelerator pedal must almost be up to the full travel stop
Pa
ge 4 of 18 Mechanical throttle control, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.6
Page 7 of 18
20-192
Vehicles with automatic transmission,
adjustment checking
Test and auxiliary equipment required
Fluke 83 Multimeter
VW 1594 Adaptor kit
- Disconnect 2-pin harness connector from kick-
down switch
In engine compartment on firewall
- Connect multimeter between kick-down switch terminals using jumper
wires from VW 1594 adaptor kit.
- Measure resistance across switch.
Specified Value:
- Slowly depress accelerator pedal until Wide Open Throttle is reached.
If properly adjusted, following conditions will be met:
Shortly after kick-down point, resistance must drop to 0 Accelerator pedal must almost be up to the full travel stop
Pa
ge 7 of 18 Mechanical throttle control, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.6