clutch AUDI A4 2000 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual
Page 12 of 17
34-12
Shift linkage, adjusting
Requirements
Components of shift mechanism and linkage
must be in proper working condition
Shift mechanism must move freely
Transmission, clutch and clutch assembly
must be in proper working condition
Transmission in neutral
- Remove shift knob and housing cover.
- Remove cover for shift mechanism housing (arrows).
Pa
ge 12 of 17 Shift linka
ge, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.34.1
Page 16 of 17
34-16
Shift mechanism adjustment, checking
Shift lever must rest in 3rd/4th shift gate
when transmission is in neutral.
- Operate clutch.
- Make sure all gears can be engaged properly.
- Check operation of reverse gear lock.
- Move shift mechanism into 5th/reverse gear
gate and move in direction of reverse gear (do
not push shift lever too hard).
The movement up to stop reverse gear lock
must be 5-10 mm (0.20-0.40 in.) (measured at
shift knob).
- Reduce pressure on shift lever, so it can move
back.
Shift lever should return by itself from the
5th/reverse gear gate and move into 3rd/4th
gear gate.
- Check fine adjustment if necessary Page 34
-
17
.
Pa
ge 16 of 17 Shift linka
ge, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.34.1