diagram AUDI A4 2000 B5 / 1.G APB Engine Additional Signals Checking User Guide
Page 34 of 37
24-208
Example 2
From the malfunctions present in the DTC memories, you can see that
control module 2 has no connection to control modules 1 or 3.
Electrical Wiring Diagrams, Troubleshooting & Component Locations Control module
Stored malfunctions in DTC memory:
1
No message from control module 2
2 No message from control module 1No message from control module 3
3 No message from control module 2
- Switch ignition off.
- Disconnect control modules that are linked by bus wires and check
whether there is an open circuit in one of the bus wires - If no malfunction can be identified in the bus wires replace control
module 2.
Pa
ge 34 of 37 Additional si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.6
Page 35 of 37
24-209
Example 3
From the malfunctions present in the DTC
memories, you can see that none of the control
modules are able to transmit or receive signals.
Control
module
Stored malfunctions in DTC
memory:
1 Data Bus Powertrain
Malfunction
2 Data Bus Powertrain
Malfunction
3 Data Bus Powertrain
Malfunction
- Switch ignition off.
Electrical Wiring Diagrams, Troubleshooting & Component Locations - Disconnect the control modules which are linked by the bus wires and
check for a short circuit between the bus wires
Pa
ge 35 of 37 Additional si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.6