coolant temperature AUDI A4 2000 B5 / 1.G APB Engine Cooling System Components
Page 6 of 34
19-5
 
  
13 - 
Radiator fan thermoswitch (-F18-), 35 Nm 
For electric fan
  Switching temperatures: Stage 1on: 92...97 Coff: 84...91 C
  Switching temperatures: Stage 2
on: 99...105 Coff: 91...98 C
14 - 
Seal 
Always replace
15 - 
Drain screw Tightening torque: 10 Nm
16 - 
Top coolant hose Secured to radiator with retaining clipCheck for secure seatingDiagram of coolant hose connections   
Page 19
-17
 
Pa
ge 6 of 34 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.19.1 
Page 15 of 34
19-14
 
  
 Repair Manual, 2.7 Liter V6 5V BiTurbo Fuel 
Injection & Ignition, Engine Code(s): APB, Repair Group 01
    7 - 
Right coolant line From turbocharger to rear coolant line
8 - 
Banjo bolt Tightening torque: 35 Nm
9 - 
Coolant temperature sender (-G62-) For engine control moduleIf necessary, release pressure in cooling 
system before removing Checking:
10 - 
Retaining clip 
Check for proper seating
11 - 
To heat exchanger 
12 - 
Rear coolant line Diagram of coolant hose connections   
Page 19
-17
 
Pa
ge 15 of 34 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.19.1 
Page 27 of 34
19-25
      
-  Start engine and let it idle for about 10 
minutes. 
     
-  Maintain an engine speed of about 2000 RPM 
for about 5 minutes. 
     
-  Allow engine to run at idling speed until bottom 
hose on radiator becomes hot. 
     
-  Check coolant level and top up if necessary. 
When engine is at normal operating temperature 
coolant level must be on max. mark, and 
between min. and max. marks when engine is 
cold. 
     
Note:  
     When the engine is hot the cooling system is 
under pressure. Carefully open filler cap on 
expansion tank to release pressure before 
starting repair work. 
     
WARNING! 
     
Hot steam can escape from the expansion 
tank when the filler cap is opened. Cover the 
filler cap with a cloth and remove it carefully. 
Pa
ge 27 of 34 Coolin
g system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.19.1