AUDI A4 2000 B5 / 1.G Parking Brake Cable All Wheel Drive Workshop Manual
Page 1 of 5
46-34
Parking brake cables for all-
wheel-drive vehicles,
removing and installing
Note:
The parking brake cable adjusting components
are in front of the lower rear control arms.
Additional information
Repair Manual, Body-Exterior
Repair Manual, Body-Interior
Removing
- Remove both rear wheels.
- Remove locking element -D-.
- Counter hold hex -E- using 13 mm open end wrench and turn adjusting
nut -C- in to stop.
- Slide cable adjuster together (arrow -B-).
Pa
ge 1 of 5 Parkin
g brake cables for all-wheel-drive vehicles, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.4
Page 2 of 5
Note:
Do not damage the parking brake cable boot when removing and
installing. - Pull out locking plate -1-.
- Remove parking brake cables at brake caliper.
Pa
ge 2 of 5 Parkin
g brake cables for all-wheel-drive vehicles, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.4
Page 3 of 5
46-35
Note:
Assembly aid for parking brake cable may drop out. It does not need to be
re-installed. - Remove parking brake cables near underbody and fuel tank (arrows).
- Use screwdriver to pry parking brake cables out of bracket.
Pa
ge 3 of 5 Parkin
g brake cables for all-wheel-drive vehicles, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.4
Page 4 of 5
46-36
- Remove rear part of center console.
Repair Manual, Body
-Interior, Repair Group
68
- Using screwdriver, push parking brake cables toward parking brake
lever and press ball stud out of bracket.
- Press guide sleeve locking element -1- together and pull parking brake
cables out toward rear in direction of arrow.
Pa
ge 4 of 5 Parkin
g brake cables for all-wheel-drive vehicles, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.4
Page 5 of 5
46-37
Installing
- Guide parking brake cables through lower rear
control arm until guide sleeve locks into place.
Parking brake cable must lock into place in bracket.
Repair Manual, Body
-Interior, Repair Group 68
- Remove any plastic parts at adjustment bracket; they do not need to be
re-installed.
- Lock adjustment bracket to prevent it from turning (size 2 screwdriver).
- Insert cable ball stud through mounting in adjustment bracket.
- Install parking brake cables at underbody and fuel tank and insert into
lever at brake caliper.
- Adjust parking brake page 46
-39
.
- Install rear part of center console.
Pa
ge 5 of 5 Parkin
g brake cables for all-wheel-drive vehicles, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.4