boot AUDI A4 2000 B5 / 1.G Suspension Rear Struts Remove And Install Workshop Manual
Page 6 of 18
42-27
9 -
Spacer tube
10 -
Mounting ring
Make sure installation position is correct
when installing
11 -
Lower washer or cup Suspension versions 1BA, 1BP and 1BE
have lower washer Suspension version 1BB has cup
12 -
Ring Suspension version 1BB has different
version
13 -
Auxiliary spring
14 -
Boot mounting ring
15 -
Boot
16 -
Protective cap Suspension version 1BB has different
version
17 -
Spring Different versions depending on
suspension version vehicle data label, page 42
-5
Always replace springs in pairsInstall with color marking at bottom
Pa
ge 6 of 18 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.2
Page 12 of 18
42-32
- Align lower spring base and spring retainer in direction of shock
absorber eye, as illustrated.
- Install compressed coil spring.
End of spring coil must lie against stop on spring retainer (arrow).
- Install protective cap, boot, boot mounting ring, auxiliary spring, ring,
mounting ring and spacer tube.
- Install upper spring base.
End of coil spring ("Federanfang") must lie against recess of upper
spring base (arrow).
Pa
ge 12 of 18 Sus
pension strut, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.2