torque AUDI A4 2000 B5 / 1.G Suspension Tie Rod Remove And Install Workshop Manual
Page 4 of 4
48-16
Installing - Move boot outward as far as possible.
- Remove tie rod using VAG1923.
- Install tie rod.
Tightening torque: 100 Nm (74 ft lb)
- When installing boot, make sure to check:
Smaller diameter of boot clips into groove on tie rod
Boot is not twisted
- Replace inner (large) clamp.
- Check wheel alignment page 44
-6 .
Pa
ge 4 of 4 Tie rods, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.3