AUDI A4 2000 B5 / 1.G Suspension Tie Rod Remove And Install Workshop Manual

AUDI A4 2000 B5 / 1.G Suspension Tie Rod Remove And Install Workshop Manual https://www.carmanualsonline.info/img/6/1181/w960_1181-0.png AUDI A4 2000 B5 / 1.G Suspension Tie Rod Remove And Install Workshop Manual

Page 1 of 4

AUDI A4 2000 B5 / 1.G Suspension Tie Rod Remove And Install Workshop Manual 48-14
 
     
Tie rods, removing and 
installing 
     
WARNING! 
     
Do not re-use any fasteners that are worn or 
deformed in normal use. 
     Some fasteners are designed to be used only 
once, a

Page 2 of 4

AUDI A4 2000 B5 / 1.G Suspension Tie Rod Remove And Install Workshop Manual      
-  Remove front wheel. 
    
-  Loosen bolts -3- and -4- and disconnect tie rod end downward.
Pa
ge 2 of 4 Tie rods, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis

Page 3 of 4

AUDI A4 2000 B5 / 1.G Suspension Tie Rod Remove And Install Workshop Manual 48-15
 
    
-  Remove plastic nut -1-. 
- Pry out clips -2-.
-  Remove cover for tie rod. 
    
-  Open clamps on boot. 
Pa
ge 3 of 4 Tie rods, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:

Page 4 of 4

AUDI A4 2000 B5 / 1.G Suspension Tie Rod Remove And Install Workshop Manual 48-16
 
    
Installing   -  Move boot outward as far as possible.
-  Remove tie rod using VAG1923.
-  Install tie rod.
   Tightening torque: 100 Nm (74 ft lb)
-  When installing boot, make sure to ch