engine AUDI A8 1996 D2 / 1.G 01V Transmission Remove And Install Service Manual

37-123


Valid for all engine/transmission types:
Components
Tightening
torques
Mounting bracket to transmission (2x M8), item no.
2 and 3 23 Nm
Heat shield/selector lever cable to transmission,
item no. 1
M6
9 Nm

M8 23 Nm
Heat shield/selector lever cable to transmission,
M8, item no. 4 23 Nm
Selector lever cable to mounting bracket -B-, item
no. 5 12 Nm
Pa
ge 55 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2

37-125


Right and left transmission mounts,
removing and installing

Special Tools and equipment

Engine/transmission support VAG1383A
engine/gearbox jack
3282 transmission support
3282/19 adjustment plate
Pa
ge 57 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2

37-126

Removing

Note:
Transmission must be supported as indicated
when both transmission supports are removed.
Transmission does not need to be supported this
way when only one of the transmission supports
is being removed.

Note:
The symbols on the adjustment plate indicate the necessary mounts for
Automatic Transmission 01V and the arrow points toward front of vehicle. - Prepare 3282 transmission support for Automatic Transmission 01V
with3282/10 adjustment plate and place it on the VAG1383A
engine/transmission hoist.

Note:
If 3282 transmission support is not available, transmission can be
supported using the VAG1383A transmission lift and the 1359/2 universal
mount. - Roll VAG1383A engine/transmission hoist with 3282 transmission
support under transmission and support transmission.
Pa
ge 58 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2

37-127

Right transmission support

Note:
The right heat shield is not installed on 6 cylinder TDI engines.
Left transmission support - Remove heat shield -C-.
- Remove right heat shield -D- by removing bolts -A- from transmission.

Note:
The left heat shield is not installed on 4 cylinder gasoline engines. - Remove heat shield -C-.
- Remove left heat shield -D- by removing bolts -A- from transmission.
Pa
ge 59 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2

37-131


Transmission, attaching to assembly
stand

Special Tools and equipment

3457 attachment and holding rig
VW540 holding fixture (only for transmission
with FWD)
VW313 holding fixture
VW309 holding plate
VAG1202A engine hoist
Pa
ge 63 of 64 Transmission, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.37.2