display AUDI A8 1998 D2 / 1.G 01V Transmission Drive Pinion And Ring Gear Adjust Workshop Manual
Page 23 of 38
39-185
Perform check measurement
Checking dimension "r"
- Rotate drive pinion at least 5 complete
revolutions in both directions.
- Insert universal mandrel and perform check measurement.
If adjustment shims were determined correctly, dial indicator must
indicate deviation "r" with a tolerance of 0.04 mm (reading
counterclockwise in red number display).
- Peen drive pinion nut using mandrel.
Pa
ge 23 of 38 Drive
pinion and rin
g gear, ad
justin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.15