drain bolt AUDI A8 1999 D2 / 1.G 01V Transmission Torque Tube Remove And Install Workshop Manual
Page 3 of 7
39-97
- Place VAG1306 drip tray underneath and drain
gear oil.
- Remove rear part of exhaust system behind
clamping sleeve(s):
Repair Manual, Engine Mechanical, Repair
Group 26; removing and installing exhaust
system
- Remove heat shields above driveshaft.
- Remove heat shield beside final drive.
- Check whether there is a factory marking (color marking) on the
driveshaft. If not, mark location of driveshaft flange -A- to rear final
drive -B- with color.
- Remove mounting bolts of driveshaft flange.
Pa
ge 3 of 7 Tor
que tube, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.7