ESP AUDI A8 2000 D2 / 1.G 01V Transmission Torque Tube Remove And Install Workshop Manual
Page 10 of 10
01-272
- If there are no malfunctions found in the bus
wires, check whether one of the control modules
is responsible for a short circuit of the bus wires
to each other, to B+ or to Ground (GND).
Disconnect each of the control modules
connected via the bus wires one at a time and
check whether the malfunction "Hardware faulty"
has been eliminated.
If it was eliminated, replace the control module
that is currently disconnected. If malfunction was
not eliminated, re-connect that control module
and disconnect the next control module
connected via the bus wires.
Pa
ge 10 of 10 CAN-
bus, function
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.15