AUDI A8 2013 Owners Manual

being load ed on th e ve hicle .
Th at w eight ma y no t safely
e xce ed the av ailabl e car go
a nd lug gag e lo ad ca pacity
c alcul ated in St ep 4 .
6. If y our vehicle will be t owing
a tr aile r, lo ad from your trail­
er will b e tr an sfe rred to yo ur
ve hicle. Con sult thi s m anu al
t o de te rmine ho w th is re­
d uce s th e av ailable car go
a nd lug gage loa d ca pacit y of
y o ur ve hi cle .
_,.. Check the tire sidewall
( c:> pag e 260 ~ fig. 208 ) to de­
t e rmin e the d esign ated lo ad
rating f or a sp ecifi c ti re.
Tire service life
The service life of tires depends on a lot of
different things including proper installation
and balancing, correct tire pressure and driv­
ing style.
F ig . 2 06 Tire tread : tread wear ind icators (TWil
Tires and wheels 259
{ '"------
F ig. 207 Rotat ing tires for more eve n wea r
Tread Wear Indicator (TWI)
The orig inal tires on your vehicle have
1/16 inch (1.6 mm) high "wear indicators"
9 fig. 206 r u nning across the tread. Depend­
ing on the ma ke, there will be six to e ight of
them evenly pla ced aro und the tire. Marks on
the tire sidewall (for e xamp le "T W I" or other
symbols) indicate the positions of the tread
wear indicators . Worn tires must be replaced .
D ifferent figures may apply in othe r countries
9 & .
Tire pres sure
Incor rect t ire press ure ca uses premature wear
and can cause sudde n tire blow-out . For this
reason, tire pressure must be checked at least
once a month
9 page 255.
Driving style
Driving fast around curves, heavy a ccele rat io n
and har d brak ing inc rease tire wear.
Rotating tires for more even w ear
For all four tires on your vehicle to have the
s a me service life, we recommend that the
front and rear t ires are rota ted accord ing to
the tire m anufact urer's suggested tire ro ta ­
tion intervals . Please remember the follow ­
ing:
- Tire rotation in tervals may d iffer from the
veh icle service inte rva ls o utlined in your
Warranty & Main tenance booklet.
- The longer o ne tire i s used in one lo cation
on the vehi cle, the more it wears at cer tain
points ; therefore, we recommend t hat you
follow the tire manufact urer's suggested
tire rotation intervals .

260 Tires and wheels
-Vehicles with front-wheel drive experience
more tread wear on the front wheels com­
pared to all-wheel drive (quattro ®).
- Please rotate tires as shown
¢fig. 207.
- Extra care must be taken when rotating di-
rection-specific tires
¢ page 2 78.
Wheel balancing
The wheels on new vehicles are balanced .
H owever, various situations during everyday
driving can cause them to become unbal­
anced , resu lting in vibrations you can usually
feel through the steering wheel.
Unba lanced wheels must be rebalanced to
avoid excessive wea r on steering , suspens ion
and tires . A wheel must also be rebalanced
when a new tire is installed.
Incorrect wheel alignment
Incorrect whee l alignment can cause exces­
sive tire wear, impair ing the safety of the vehi­
cle .
If tires show excess ive wear, have the
wheel alignment checked by an authorized
Audi dealer or qualified workshop.
All Wheel Drive
Vehicles with quattro® must always have ti res
of the same size, construction and tread type.
F or details see
¢page 203.
A WARNING
Sudden tire failure can lead to loss of con­
trol, a crash and serious personal injury!
- Never drive a vehicle when the tread on
any tire is worn down to the wear indica­
tors.
- Worn tires are a safety hazard, they do
not grip well on wet roads and increase
your risk of "hydrop laning" and loss of
control.
- Always keep chemicals that can cause
tire damage, such as grease, oil, gasoline
and brake fluid away from tires.
- Tires age even if they are not be ing used
and can fail suddenly, especially at high
speeds. Tires that are more than 6 years old can only be used in an emergency and then with specia
l care and at lower
speeds.
- Never mount used tires on your vehicle if
you are not sure of their "previous histo­
ry." Old used tires may have been dam­
aged even though the damage cannot be
seen that can lead to sudden tire failure
and loss of vehicle control.
New tires and replacing tires and wheels
New tires and wheels have to be broken in.
Fig. 208 Tir e spec ificatio n codes on the s idewall of a
tire
No.
©
®
®
0
®
®
@
Description
Passenger car tire (where applicable)
Nominal width of tire in mill imeters
Ratio of height to width (aspect ratio)
Rad ial
Rim diameter code
Load index and speed rating
U.S. DOT tire identification number
Aud i Original tire
Sever snow conditions
Tire ply composition and materials
used
Maximum load rating

@ Treadwear, traction and temperature grades
@ ·· Maximum permissible inflation pres­
. . sure
The tires and rims are essential parts of the
vehicle's design. The tires and r ims approved
by Aud i are specially matched to the charac­
ter istics of the vehicle and can make a major
contribution to good road ho ld ing and safe
handling when in good condition and properly
inflated ¢
&.
We recommend that all work on tires and
wheels be performed by an authorized Audi
dea ler. They a re familiar with recommended
procedu res and have the necessary spec ial
too ls and spare par ts as we ll as the prope r fa ­
cilities for disposing of the old tires.
Author ized Audi dealers have the necessary
informat ion about techn ica l requ irements for
installing or changing tires and r ims.
R eplacing t ires and whe els
Tires should be replaced at least in pairs and
not individua lly (for example both front tires
or both rear tires togethe r) .
Be sure to read and heed the information to
the t ire pressure monitoring system*
¢page 267 .
Always buy replacement radial tires that have
the same specifications as the tires approved
for your vehicle by Audi . Replacement t ires
must always have the same load rating speci­
fication as the or iginal equipment or app roved
optional ti res listed in the table ¢
page 253.
Audi-approved specification tires are specially
matched to you r vehicle and its load lim its,
and can cont ribute to the important road ho ld­
i ng, d riving character istics, and safety of the
vehicle . The table(¢
page 253) lists spec ifica ­
tions of the tires approved for the A udi mod­
e ls covered by your Owner's Literature.
The ti re p ress ure label located on dr iver's side
B-pillar
(¢page 253, fig. 205) lists the speci­
fications of the original equipment tires in-
Tire s an d wheel s 261
stalled on your vehicle at the time it was man­
u factured.
Federa l law requ ires tire man ufactu rers to
place standardized info rmation on the side­
wall of all tires¢
fig. 208. This information
identifies and descr ibes the fundamenta l
characteristics, the q uality grade of the t ire
and also provides a t ire identification number
for safety standard certification and in case of
a reca ll.
Tir e s pecific ation s
Knowledge of tire specifications makes it eas­
ier to choose the correct tires . Radial tires
have the tire specifications marked on the
s idewall, for example:
2 55 /45 R 19 104 H
T his conta ins the following information:
P Indicates the tire is for passenger cars
(where app licab le)
2 55 Nom inal tire w idth in mm of the t ire
from sidewall edge to sidewall edge . In
general, the larger the number, the wider
the tire
45 Height/w idth ratio in perce nt (aspect ra-
t io)
R Tire construct ion : Radial
19 Rim diameter code (in inches)
104 Load rating code
H Speed rating letter code
XL (or "xl", "EXTRA LOAD" or "RF") Indicates
that the tire is a "Reinforced" or an "Extra Load" tire
M+S (or "M/S") Indicates that the tire has
some mud and snow capability
T he tires could also have the informa tion of
direction of rotat ion ¢
page 249.
Tire manufacturing date
The manufactu ring date is also indicated on
the tire sidewall (possibly on ly on the
inner
s ide of the whee l):
"DOT ... 2212 ... " means, for example, the t ire
was produced in the 22nd week of 2012 . ..,.
•
•

262 Tire s and wheels
Speed rating (letter code)
The speed rating letter code on the wheels in­
dicates the maximum pe rmissib le road speeds
¢ & in Winter tires on page 265 .
p up to 93 mph (150 km/h)
Q up to 99 mph (158 km/h)
R up to 106 mph (170 km/h)
s up to 110 mph (180 km/h)
T up to 118 mph (190 km/h)
u up to 124 mph (200 km/h)
H up to 130 mph (210 km/h)
V up to 149 mph (240 km/h)1l
z over 149 mph (240 km/h)1l
w up to 168 mph (270 km/h)1l
y up to 186 mph (298 km/h)1l
Your vehicle is normally factory equipped with
tires, which possess excellent driving charac­
teristics and give your Audi optimum driving
comfort. An electronic speed limiter
<=> page 29 will normally prevent your vehicle
from go ing faster than the tire speed rating
<=> & .
U.S . DOT Tire Identification Numbe r (TIN)
and tire manufacture date
This is the t ire's "serial number". It begins
with the letters "DOT" and indicates that the
tire meets all federal standards. The next two
numbers or letters indicate the plant whe re it
was manufactured, and the last four numbers
represent the week and year of manufacture.
F or example, the numbers 2212 mean the tire
was produced in the 22nd week of 20 12. The
other numbers are marketing codes that may
or may not be used by the t ire manufacturer.
This information is used to contact consumers
if a tire defect requires a recall.
Audi original tire
Tires with the identification "AO" or "RO" have
been specially matched with your Audi. We
recommend using only these tires because
they meet the highest standards regarding
ll For tires wit h a max imum speed capab ility over 149
mph (240 km/h), tire man ufactur ers sometimes use
the letters "ZR."
safety and driving characterist ics when used
correct ly . Your authorized Audi dealer will
gladly provide you w ith more information.
Tire ply composition and materials used
The number of plies indicates the number of
layers of rubber-coated fabric in the tire. In
genera l, the greater the number of plies, the
more weight a tire can support. Tire manufac ­
turers also must indicate the materials in the
tire, which include steel, nylon, polyester, and
others.
Maximum Load Rating
This number indicates the maximum load in
kilograms and pounds that can be carried by
the tire.
Tire quality grading for treadwear,
traction , and temperature resistance
Tread wear, traction and temperat ure grades
<=> page 2 63.
Maximum Permissible Inflation Pressure
Th is number is the greatest amount of air
pressure that should ever be put in the tire
under normal driving conditions.
A WARNING
-Using incorrect or unmatched tires and/
or wheels or improper tire and wheel
comb inat ions can lead to loss of control,
coll is ion and serious personal injury.
- Always use tires, rims and wheel bolts
that meet the specif ications of original
factory- installed tires or other combina­
tions that have been specifically ap­
proved by the vehicle manufacturer.
- T ires age even if they are not being used
and can fail suddenly, especially at high
speeds. Tires that are more than 6 years
old can only be used in an emergency
and then with specia l care and at lower
speeds.

-Never mount used tires on your vehicle if
you are not sure of their "previous histo­
ry." Old used tires may have been dam­
aged even though the damage cannot be
seen that can lead to sudden tire failure
and loss of vehicle control.
- All four wheels must be fitted with radial
tires of the same type, size (rolling cir­
cumference) and the same tread pattern.
Driving with different tires reduces vehi­
cle handling and can lead to a loss of
control.
- If the spare tire is not the same as the
tires that are mounted on the vehicle -
for example with winter tires - only use
the spare tire for a short period of time and drive with extra care. Refit the nor­
mal road wheel as soon as safely possi­
ble.
- Never drive faster than the maximum
speed for which the tires on your vehicle
are rated because tires that are driven
faster than their rated speed can fail
suddenly.
- Overloading tires cause heat build-up,
sudden tire failure, including a blowout
and sudden deflation and loss of control.
- Temperature grades apply to tires that
are properly inflated and not over or un­
derinflated .
- For technical reasons it is not always
possible to use wheels from other
vehicles - in some cases not even wheels
from the same vehicle model.
- If you install wheel trim discs on the ve­
hicle wheels, make sure that the air flow
to the brakes is not blocked. Reduced air­
flow to the brakes can them to overheat,
increasing stopping distances and caus­
ing a collision.
- Run flat tires may only be used on
vehicles that were equipped with them
at the factory. The vehicle must have a
chassis designed for run flat tires. Incor­
rect use of run flat tires can lead to vehi­
cle damage or accidents. Check with an
authorized Audi dealer or tire specialist
to see if your vehicle can be equipped
Tires and wheels 263
with run flat tires. If run flat tires are
used, they must be installed on all four
wheels. Mixing tire types is not permit­
ted.
@ Note
- For technical reasons, it is not generally
possible to use the wheel rims from oth­
er vehicles. This can hold true for wheels
of the same vehicle type.
- If the spare tire is different from the
tires that you have mounted on your ve­
hicle (for example winter tires or wide
profile tires), then use the spare tire for a
short period of time only and drive with
extra care. Replace the flat tire with the
tire matching the others on your vehicle
as soon as possible.
- Never drive without the valve stem cap .
The valves could get damaged.
(® For the sake of the environment
Dispose of old tires in accordance with the
local requirements.
Uniform tire quality grading
-Tread wear
- Traction AA A B C
- Temperature ABC
Quality grades can be found where applicable
on the tire side wall between tread shoulder
and maximum section width
~ page 260,
fig. 208 .
For example: Tread wear 200, Traction AA,
Temperature A.
All passenger car tires must conform to Feder­
al Safety Requirements in addition to these
grades .
Tread wear
The tread wear grade is a comparative rating
based on the wear rate of the tire when tested
unde r contro lled conditions on a specified
government test course. •
•

264 Tire s and wheel s
For example, a tire graded 150 wou ld wear
one and one half (1 1/2) times as well on the
government course as a tire graded
100.
The relat ive perfo rmance of t ires depends
upon the actua l conditions of their use, how ­
ever, and may depart significantly from the norm due to var iat ions in dr iving habits, serv­
ice practices and differences in road character­
istics and climate.
Traction
The traction grades, from highest to lowest,
are AA, A, Band
C. Those grades represent the
tire's ability to stop on wet pavement as
measured under controlled cond it ions on
specif ied government test surfaces of asphalt
and concrete . A tire marked
C may have poor
traction performance
q ,& .
Temp eratu re
The temperature grades are A (the h ighest),
B, and
C, representing the t ire 's resistance to
the generat ion of heat and its ability to dissi­
pate heat when tested under controlled cond i­
tions on a specified i ndoor laboratory test
wheel.
Sustained hig h temperature can cause the
materia l of the tire to degenerate and reduce
tire life, and excessive tempe rature can lead
to sudden ti re failu re
q ,& .
The grade C corresponds to a level of perform­
ance which a ll passenger car tires must meet
u nder the Federa l Moto r Ve hicle Safety Stand­
a rd No.
1 09. G rades Band A represent higher
l eve ls of pe rformance on the labo ratory test
wheel than the m inimum required by law.
A WARNING
T he traction grade assigned to this t ire is
based on straight-ahead b raking traction
tests, and does not incl ude acceleration,
cornering, hydrop lan ing or peak traction
character istics.
A WARNING
The temperature grade for this tire is es­
tablished for a tire that is properly inflated
and not overloaded. Excess ive speed, un­
derinflation, or excessive load ing, either
separa tely or in comb inat ion, can ca u se
h eat bui ld up a nd possib le tire failure.
-
Winter tires
Winter tires can improve vehicle handling on
snow and ice . At temperatures below 45 °F
(7 °C) we recommend changing to winter
tires.
In some heavy snow areas , local gove rnments
may requi re true w in te r or "snow" tires, those
wi th very deeply cut t read . T hese tires sho uld
o n ly be used in pairs and be installed on a ll
fo ur whee ls. Make sure you purchase snow
ti res that are the same size and construction
type as the other tires on your vehicle.
If your vehicle is e quipped w it h all-whee l
drive*, this wi ll improve traction during winter
driving, even with the standa rd tires . Howev ­
er, we strongly recommend that you always
equip all four wheels o n your veh icle w ith cor­
rect ly fitted winter tires or all-season t ires,
when winter road condit ions are expected .
Th is also improves the veh icle's brak ing per­
fo rmance and reduces stoppi ng d ista nces .
Summer tires provide less grip on ice and
snow .
Winter tires (snow tires) must always be fitted on all four wheels .
Ask your authorized A udi dealer or qualified
workshop for permitted
winter ti re size s. Use
on ly rad ial winter tires.
Win ter tires lose their effec tiveness when the
tread is worn down to a depth of
0. 157 inch
(4 mm) .
Only drive w ith w in te r tir es under w inte r con­
di tions. S umme r tires handle bette r when
there is no snow or ice on the roads and the
temperature is above 45
°F (7 °() .

If yo u have a flat tire, see notes on spa re
wheel
¢ page 260 .
P lease always remember th at w inte r ti res may
have a lower speed rating than the t ires origi­
na lly installed on your vehicle at the time it
was manufactured. Please see ¢
page 262,
Speed rating (letter code) for a list ing of the
speed rat ing letter codes and the m aximum
speed at which the tires can be driven .
The speed rating letter code( ¢
page 252) is
on the s ide wall of the tire ¢
page 260.
A WARNING
Winter tires have maximum speed limits
that may be lower than your vehicle's max­
imum speed . Always know the maximum
speed before driving off. Never drive faster
than the speed permitted for your specific
w inter t ires. This will cause damage to the
t ires leading to an acc ident and serious
personal in jury to you and yo ur passen­
gers .
& WARNING
Driving faster than the maximum speed
for which the winter tires on your vehicle
were designed can cause tire fai lure in­
cluding a blowout and sudden deflat ion,
loss of control, crashes and serious per­
sonal injuries . Have worn or damaged tires
rep laced immed iate ly .
- Winter tires have max imum speed rat ing
that may be lower than your veh icle's
maximum speed .
- Never drive faster than the speed for wh ich the winter or other tires installed
on your vehicle are rated.
A WARNING
Always adjust your d rivi ng to the road and
t raffic conditions. Neve r let t he good ac­
celeration of the winte r tires and all-whee l
drive tempt you into taking extra r is ks. A l­
ways remember:
Tire s an d wheel s 265
-W hen braking, an a ll-wheel drive vehicle
handles in the same way as a front drive
veh icle.
- Drive carefully and reduce your speed on
icy and slippery roads, even w inter t ires
cannot help under black ice conditions.
@ For the sake of the environment
Use summer tires when weather condi­
tions permit. They are quieter, do not wear
as quickly and reduce fuel consumpt ion.
Snow chains
Snow cha ins may be fitted only to the front
whee ls, and o nly to certain tire sizes . Ask your
authorized Aud i dea le r on which tire sizes
snow c hains can be used.
If you a re go ing to u se snow chains, then you
must install them on the front whee ls at
least.
The snow chains mus t have low-profile links
and must not be th icker than 0 .4 inch
(10,5 mm) , includ ing t he lock.
Remove wheel center covers and trim discs
before putt ing snow cha ins on your vehicle
¢ (D . For safety reasons cover caps must then
be fitted over the wheel bol ts . These a re ava il­
able from autho rized Aud i deale rs .
A WARNING
Usi ng the wrong snow chai ns for your vehi­
cle o r insta lling them incorrect ly can in­
crease the r isk of loss of cont ro l leading to
serious pe rsonal injury.
- Snow chains are available in different
sizes . Always make sure to follow the in ­
structions provided by the snow chain manufacturer .
- When drivi ng with snow chains never
drive faster than the speed permitted for
your specif ic snow chains.
- Always observe local regulations .
•
•

26 6 T ire s and whee ls
- Remove snow chains before driving on
roads not covered with snow to avoid
damaging t ires and wearing the snow
chains down unnecessarily.
- Snow chains, which come into d irect con­
tact with the wheel rim, can scratch or
damage it. Therefore, make sure that the
snow chains are suitably covered . Check
the position of the snow chains after
driving a few yards and correct if neces­
sary. Follow the instructions from the
snow chain manufacturer when doing so.
- If the Adaptive Air Suspension should
malfunction, do not mo unt or use snow
cha ins beca use the veh icle will be ex­
tremely low. If you do drive with snow
chains on while the vehicle is at this lev­
el, the snow chains might severely dam­
age the wheelhouse and other parts of
the veh icle.
Where snow chains are mandatory oncer­
tain roads, this normally also applies to
veh icles with All Wheel Drive.
Wheel bolts
Wheel bolts must always be tightened to the
correct torque.
The design of whee l bolts is matched to the
factory installed rims. If different rims are fit­
ted, the correct wheel bolts with the r ight
length and correctly shaped bolt heads must
be used. This ensures that wheels are fitted
securely and that the brake system functions
cor rectly .
In certain circumstances, you may not use
wheel bolts from a different vehicle - even if it is the same model
~ page 298.
A WARNING
Imprope rly tightened o r maintained wheel
bolts can be come loose caus ing loss of control, a col
lision and serio us personal in­
jury.
- Always keep the wheel bo lts and the
threads in the whee l hubs clean so the
wheel bo lts can turn easily and be prop­
erly tightened.
- Never grease or oil the wheel bolts and
the threads in the wheel hubs. They can become loose while driv ing if greased or
oiled, even if t ightened to the specified
torque.
- Only use wheel bolts that belong to the rim being installed .
- Never use different wheels bolts on your
veh icle.
- Always ma intain the correct tightening
torque for the whee l bolts to reduce the
risk of a wheel loss. If the tightening tor­
que of the wheel bolts is too low, they
can loosen and come out when the vehi­
cle is mov ing. If the tig htening torq ue is
too high, the wheel bolts and threads
can be damaged and the whee l can be ­
come loose .
(D Note
The specified torque for the whee l bolts is
90
ft l b (120 Nm) with a tolerance of± 7,4
ft lb(± 10 Nm) . Torque whee l bolts diago ­
nally . After changing a whee l, the torque
must be checked as soon as possible with a
torque wrench -preferably by an author­
i zed Audi dealer or qualif ied workshop.
Low aspect ratio tires
Your Audi is factory-equ ipped w ith low aspect
ratio tires . These tires have been thoroughly
tested and been se lected specifically fo r your
model for their superb perfo rman ce, road fee l
and hand ling under a variety o f driving condi­
tions. Ask your authorized A udi dealer for
more details .
T he low aspect ratio of these tires is ind icated
by a numera l of
55 o r less in the tire's s ize
designation. The numeral rep resents the ratio
of the tire's sidewa ll height in relation to its
ll-

tread width expressed in percentage. Conven­
tional tires have a height/width ratio of 60 or
more .
The performan ce of low-aspe ct-ratio tires is
particularly sensitive to improper inflation
pressure . It is therefore important that low
aspect ratio tires are inflated to the specified
pressure and that the inflation pressure is
regularly checked and maintained . Tire pres­
sures should be checked at least once a
month and always before a long trip
¢ page 2 55, Checking tire pressure .
What you can do to avoid tire and rim
damage
L ow aspect ratio tir es can be damaged more
eas ily by impact with potho les, curbs, gu llies
or r idges on the road, part icu larly if the tire is
under inflated.
In order to minimize the occurrence of impact
damage to the tir es of your veh icle, we recom­
mend that you observe the following precau­
tions :
- Always maintai n recommended inflation
pressures . Check your tire pressure every
2,000 miles (3,000 km) and add air if neces­
sary.
- Drive carefully on roads with potholes, deep
gullies or r idges. The impact from driving
through or over such obstacles can damage
your tires. Impact with a curb may a lso
ca use damage to your tires .
- After any impact, immediately inspect your
tires or have them inspected by the nearest
autho rized Audi dealer. Replace a damaged
t ir e as soon as possible.
- Inspect yo ur tires every 2,000 miles (3,000
km) for damage and wear. Damage is not al­
ways easy to see. Damage can lead to loss of
air and underinflation, wh ich could eventu­
ally cause tire failure . If you be lieve that a
t ir e may have been damaged, replace the
t ir e as soon as poss ible .
- These tires may wear more quick ly than oth ­
ers .
- Please a lso remember that, while these tires
deliver respons ive handling, they may ride
Tires and wheels 267
less comfortably and make more noise than
other choices.
Reduced performance in winter/cold
season conditions
All tires are designed for certain purposes.
The low aspect ratio, ultra high performance
tires originally installed on your vehicle are in­
tended for maximum dry and wet road per­
formance and handling. They are not suitable
for cold, snowy or icy weather conditions .
If
you drive under those circumstances, you
shou ld equip your vehicle w ith all-season or
winter tires, which offer better t raction unde r
those conditions. We suggest you use the rec­
ommended snow or all- season tires specified
for your vehicle, or their equivalent.
Refer to~
page 264 for more detailed infor ­
mation regarding winter tires.
Tire pressure
monitoring system
ill General notes
Applies to veh icles: w ith t ire pressure monitoring syste m
Each tire, including the spare (if provided),
should be checked monthly when cold and in­
flated to the inflation pressure recommended
by the vehicle man ufacturer on the vehicle
placard or tire inflation pressure labe l. (If your
vehicle has tires of a different size than the
s iz e in dicated on the vehicle placard or tire in­
flat ion pressure label, you should determine
the proper tir e inflation pressure for those
tires) .
As an added safety feature, your veh icle has
been equipped with a tire pressure monitoring
system (TPMS) that illum inates a low tire
pressure telltale when one o r more of your
tires is s ignificantly under-inflated. According­
l y, when the low tire pressure telltale illumi­
nates, you shou ld stop and check you r tires as
soon as possible, and inflate them to the
proper pressure . Driving on a significantly un ­
der-inflated tire causes the tire to overheat
and can lead to tire fa ilure. Under-inflation al-
so reduces fuel effic iency and tire tread life, ..,.
•
•

268 Tires and wheels
and may affect the vehicle's handling and
stopping ability.
Please note that the TPMS is not a substitute
for proper tire maintenance, and it is the driv­
er's responsibility to maintain correct tire
pressure, even if under-inflation has not
reached the level to trigger illumination of the
TPMS low tire pressure telltale .
Your vehicle has also been equipped with a
TPMS malfunction indicator to indicate when
the system is not operating properly. The
TPMS malfunction indicator is combined with
the low tire pressure telltale. When the sys­
tem detects a malfunction, the telltale will
flash for approximately one minute and then
remain continuously illuminated. This se­
quence will continue upon subsequent vehicle
start-ups as long as the malfunction ex ists.
When the malfunct ion indicator is illuminat­
ed, the system may not be able to detect or
signal low tire pressure as intended . TPMS
malfunctions may occur for a variety of rea­
sons, including the installation of replace­
ment or a lternate tires or whee ls on the vehi­
cle that prevent the TPMS from functioning
properly. Always check the TPMS malfunction
telltale after replacing one or more tires or
wheels on your vehicle to ensure that the re­ placement or alternate tires and wheels allow
the TPMS to continue to function properly.
Tire pressure indicator appears
App lies to vehicles: with tire pressure monitoring system
The tire pressure indicator in the instrument
cluster informs you if the tire pressure is too
low or if there is a system malfunction .
Fig. 209 Display: underinflation warning
Fig. 210 Disp lay: System malfunction
Using the ABS sensors, the tire pressure moni ­
toring system compares the tire tread cir cum­
ference and vibration character istics of the in ­
dividua l tires. If the pressure decreases in one
o r more t ires, this is ind icated in the instru­
ment cluster with a warning symbol
[«E and a
message ~
fig. 209.
The tire pressure monitoring system must be
reset via MMI each t ime the press ures are ad­
justed (e.g. when switching between partial
and full load pressure) or after changing or re­
placing a tire on your vehicle
c::> page 269. The
TPMS indicator only monitors the tire pres­
sure that you have previously stored. You can
find the recommended tire pressures for your
vehicle on the label on driver's side 8-pillar
c::> page 2 53.
Tire tread circumference and vibration charac­
teristics can change and cause a tire pressure
warning if:
- the tire pressure in one or more tires is too
low,
- the tire has structural damage ,
- the tire pressure was changed, wheels rotat-
ed or replaced but the TPMS was not reset
c::> page269.
Warning symbols
[tE Loss of pressure in at least one tire c::> ,1,. .
Check the tire or tires and replace or repair if
necessary. The indicator light
[tE in the instru­
ment cluster also illuminates
c::> page 11.
Check/correct the pressures of all four tires
and reset TPMS via MMI.
119;~, < T ire Pressure Monitoring System) Tire
pressure! System malfunction .
IJJ,-