display AUDI Q5 2018 User Guide

u co ..... N r-­N .....
~ 0 co
- Time and date¢ page 245
- Digital speedometer*
- Average consumpt ion
- Rema ining range*
- Short-term memory overview
- Long-term memory overview
- Energy consumers *
~ page 17
- Driver assistance* ¢ page 102
- T raffic s ign recognition* ¢
page 97
The short-term memory collects driving informa­
tion from the t ime the ignition is sw itched on un­
til it is switched off. If you continue driv ing with­
i n two hours after switching the ign ition off, the
new values are included when calculating the cur­
rent trip information .
Unlike the short-term memory, the long-term
memory is not e rased automat ical ly. Yo u can se­
l ect the time period for evaluating trip informa­
tion yourself .
Fuel consumption
The current fue l consumption can be shown us­
ing a bar g raph ¢
fig. 14. The average cons ump­
tion stored in the short-term memory is also dis­
p layed .
If the bars are green or the gray tone on
the bars changes (depending on the equipment),
your vehicle is sav ing fuel by the following func ­
tion :
-Rec upe rati on: electrical energy can be stored in
the vehicle battery when the vehicle is coasting or driving downhill. The bar will move toward
0 /0.
@ Tips
The date, time of day and time and date for­
mat can be set in the Infotainment system
<::> page 245 .
Coc kpit o verview
Energy consumers
Applies to: vehicles with energy consumers
Fig. 15 Instrume nt cluster : en ergy consumers
In the Ene rg y c onsume rs view, the other equip­
ment that is current ly affecting fuel consumption
is listed in the first tab (on-board computer) . The
display shows up to three energy consumers @
¢
fig . 15. The equipment using the most power is
l isted fi rst. If more than three items using power
are switched on, the equ ipment that is currently
using the most power is displayed .
A gauge @also shows the cu rrent tota l con­
s u mption of all othe r consumers.
Engine oil temperature display and boost
indicator
Applies to : vehicles with engine o il temperature display/boost
indicator
Applies to: vehicles with analog instrument cluster
The engine oi l temperature and boost ind icator
are only s hown in the lap t imer d isplay
<::>page 98.
Eng ine oil temp erature indica tor
Applies to: vehicles with Aud i v ir tual cockp it
The engine oi l temperature is on ly shown in the
enhanced view or in the sport view
c:> page 14.
When eng ine oi l temperatures are low, the dis­
play--- °F (--- °C) appears in the instrument clus­
ter .
The eng ine has reached its operat ing tempera­
ture when the engine oil temperature is between 176 °F (80 °() and 248 °F (120 °() unde r normal
driv ing cond itions. The engine o il temperature
..,,.
17

Cockpit overv iew
may be higher if there is heavy eng ine load and
high temperatures outside . This is not a cause for
concern as long as
the .¢ page 24 or II
¢ page 24 indicator lights do not turn on.
Boost ind icator
Applies to: ve hicles w ith Audi virtual cockpit
The boost indicator is only displayed in the sport
view ¢ page 14 .
The current eng ine load (meaning the current
boost pressure) is indicated by a bar .
Head-up display
Appl ies to: ve hicles with hea d-up d isp lay
F ig. 16 Instrument pane l: knob for the head -up disp lay
I
The head-up display projects certa in warnings or
selected information from the assist systems * or
nav igation* on the windshield. The d isp lay ap­
pears within the driver's field of vision.
Switching on /off
.. To switc h the head-up disp lay on, press the~
knob .
.. To switch the head-up disp lay off, press the~
knob.
Adju sting the height
The height of the display can be adjusted to t he
individual driver.
.. Make sure yo u are seated correct ly
¢page 253 .
.. Turn the knob~ to adjust the display.
18
Settings in the Infotainment system
.. Select in the Infot ainment system: IMENU ! but­
ton
> Vehicle > l eft control b utton > Driver as­
sistance > Head-up di splay .
Display content
In the Infotainment system, you can spec ify
which information sho uld be disp layed: For ex ­
ample, this can include navigation information*,
adaptive cruise contro l* or camera -based tra ffic
s ign recognition *.
The display of ce rtain informa tion and some of
the red indica tor ligh ts cannot be h idden in the
Infotainment system .
Brightness
You can adjust the display br ightness in the Info­
ta inme nt sys tem. The display br igh tness dec reas ­
es autom atically as the amount of lig ht decreas­
es . The bac kg round br ightness is adjusted w ith
the instr ument
illumination ¢ page 49.
Picture rotation
You can rotate the picture in the Infotainment
system cloc kwise or counter clockwise .
(D Note
To prevent sc ra tches on the glass covering the
head-up display, do not p lac e any objects in
the project ion opening.
(D Tips
- Sunglasses with po larization filte rs and un­
favor able light ing cond itions can have a
negative effect on the disp lay.
- An opt imum d isp lay depends on the sea t
posit io n and the height ad justment of the
head -up disp lay.
- A spec ial windshie ld is needed for the head­
up display funct ion.
- For information on cleani ng,
see¢ table In­
terior cleaning on page 346.

u co ..... N r--­N ..... 0 <( 0 00
Indicator lights
Description
The indicato r lights in the inst rument cluste r
b link or turn on. They ind icate funct ions or mal ­
f u nctions.
Messages may appear with some indicator l ights .
A wa rni ng sig nal w ill so und at the same t ime.
The indicato r lights a nd messages in the instr u­
men t cluster display can be covered by o ther d is ­
p lays. To show t hem again, select the second tab
with the m ultifunction steering wheel
¢ page 12 .
If th ere are seve ral malfunctions, you can display
them one at a time using the thumbwheel.
Some ind icator lights in the disp lay can display in
several colors .
& Central indicator light
If the. or u indicator light turns on, check
the message in the instrument cluster.
Overview
Some ind icator lights turn on briefly as a function
check whe n you switch the ig nition on . These sys­
tems are marked with a
./ i n t he following tables .
I f o ne of these indicato r lights does not turn on,
the re is a ma lf un ction in t hat system.
Your ve hicle has either a monochrome display or
a mu lticolored display, depend ing o n ve hicle
eq uipment. Some indicato r lights appear wh ite
on a monochrome d isp lay.
The . or II cen tral
in dic ator light turns on at the same t ime to indi ­
cate the priority of these indicator lights.
Red indicator lights
--------------
Cent ral indicato r light
¢page 19,
Aud i pre sense *
¢page 112
USA models:
brake system ./
¢ page22
Coc kpit o ver view
Canada mod els:
bra ke system ./
¢page 2 2
USA models:
electromechanica l parking b rake
¢ page 23
Canada models :
electromechan ic al pa rki ng b rake
¢page 23
Cooling system
¢ page 23
Engine o il pressure
¢ page 24
Engine o il level (MIN)*
¢ page 24
Alternato r
¢page 24
Safety be lt
¢ page 24
Elec trome chanic al steering ./
¢ pag e 144
Stee ring lock
¢ page 24
Engine sta rt system
¢ page 25
Transmission
¢page 89
Hood
¢page 25
Adaptive cruise contro l* ./
¢ page 104
Traffic jam assist*
¢ page 109
Air s uspension*
¢ page 25
Yellow ind icator lights
--------------
Centra l indicator light
¢ page 19
Elec tron ic St abiliz ati on Contro l
(ESC)
¢ page26
19

Cockpit overview
~ Safety belt
The. indicator light stays on unt il the driver's
and front passenger's safety belts a re fastened.
Above a certain speed, there will also be a warn ­
ing tone.
(D Tips
For additional information on safety belts,
see
"* page 261.
0 Generator/vehicle battery
If the . or(•) indicator light turns on, there is a
malfunction in the generator or the vehicle elec­
tr ica l system .
• Electrical system: malfunction! Safely stop
vehicle
Do not continue driving and switch the engine
off. See an authorized Audi dea le r or aut horized
Audi Service Facility for assistance .
(•) Electrical system: malfunction! Restart not
possible. Please contact Service
The vehicle battery was disconnected from the
veh icle elect rical system and will no longer
charge . Drive to an authorized Aud i dealer or au­
thorized Audi Service Facility immediately.
Do not stop the engine, or you will not be able to
start it aga in . If you can no longer start the en­
g in e, see an authorized Aud i dealer or autho rized
Aud i Service Facility for assistanc e.
(•) F.lectrical system: malfunction! Please con­
tact Service
Drive to an authorized Aud i dea ler or authorized
Aud i Serv ice Facility immediately . Because the ve­
h icle battery is d ischarg ing, turn off all unneces­
sary electr ical equipment such as the radio. See
an authorized Audi dealer or authorized Audi
Service Facility if the battery charge level is too
low.
(•) Electrical system: low battery charge. Bat­
tery will be charged while driving
The start ing ability may be impaired.
24
If this message turns off after a little whi le, the
vehicle battery charged enoug h while driving.
If the message does not turn off and stay off
whe n driving, have an authorized Aud i dealer or
authorized Audi Service Facility repair the mal­
function .
~ Engine oil pressure
• Turn off engine. Oil pressure too low
Stop the engine and do not continue driving.
Check the engine oi l level
~ page 317.
- If the eng ine oil level is too low, add engi ne oil
¢ page 317 . Only continue driving once the in­
dicator light turns off .
- I f the engine oil level is correct and the indica­
tor light still turns on, turn the engine off and
do not continue driving. See an authorized Audi
dealer or authorized Audi Service Facility for as­
sistance.
(D Tips
T he oil pressure warn ing is not an oil leve l in ­
dicator. Always check the oil leve l regularly.
't'.:7;, Engine oil level (MIN)
Appl ies to: vehicles with o il level warning
• Please add oil immediately.
Add engi ne oil immediately ¢page 317.
Ill Please add max. x qt (l) oil. You can contin­
ue driving
Add the maximum amount of oi l indicated in the
display as soon as possible
¢ page 317 .
~-Steering lock
• Steering: malfunction! Please stop vehicle
There is a ma lfunction in the e lectron ic steering
lock. You cannot tur n the ignition on.
Do
not tow your vehicle because it cannot be
steered. See an a uthorized Audi dea ler or author­
i z ed Audi Service Facility for assistance.
...

Cockpit overv ie w
Othe rw ise, conditions such as an uneven road
surface can lead to ve hicle damage.
B Su sp ension : malfun ction! You ma y continu e
driving
There is a suspension control malfunction .
Drive to an authorized Aud i dea ler or authorized
Aud i Serv ice Facility immediately to have the
malfunct ion corrected.
f;. ![J Electronic Stabilization Control (ESC)
If the D.1 indicato r light b links wh ile driving, the
E SC or ASR (Anti-S lip Reg ulation) is actively reg u­
lating.
If the
Ii) i ndicato r light turns on, the system has
sw itched the ESC off. In this case, you can switch
the ign ition off and t hen o n to switch the ESC on
aga in. The indica tor ligh t turns off when the sys ­
tem is func tioning fully .
I f the
II indicato r light turns on, ESC was
sw itched off using the
1.$ ,., 1 button ~ page 140.
Stabilization control (ESC/ ABS): malfun ction!
See owner' s manual
If the Ii) indicator light and the [1] (USA mod­
e ls)l liJ (Canada models) ABS indicator light turn
on and the message appears, there is a malfunc ­
tion in the ABS or the elect ronic d ifferential lock .
This a lso ca uses the ESC to malfunct ion. The
b rakes still f unct ion w it h t heir no rma l power , but
ABS is no t active.
Dr ive to an a utho rized Aud i deale r or a uth orized
Aud i Serv ice Facility immediately to have t he
malfunct io n corrected.
(D Tips
For add it ional information on ESC and ABS,
see
~ page 140.
!f Safety systems
The E,I ind icator ligh t moni to rs t he safety sys ­
tems .
I f t he
E,I indicato r light turns on o r blinks, there
is a malfunction in a safety sys tem .
26
Drive to an authori zed A udi dealer or au thori zed
Audi Service Facility immediate ly to have the
malfunction corrected.
A WARNING
-
Have the safety systems inspected immedi­
ately. Otherwise, there is a r isk that the sys­
tems may not activate during a collision,
which increases the risk of serious inju ry or
death.
( CD ) Brake system
miJ Brake s overheating . Please shift to D
There was a heavy load on the brakes . P lace the
selector lever in the "D/S" posit ion in order to use
t h e engine brak ing effect and reduce the load on
t h e b rakes.
wt:t /{0 ) Brake pads
II (USA model s)!£tjJ (Canada mod els ) Brake
pad s: wear limit reached. You can continue dri v­
ing . Please contact Service
The bra ke pads a re wor n.
Drive to an authorized Audi dealer or authorized
Audi Service Fac il ity as soon as poss ible to have
t h e malfunct ion corrected.
d::, Engine control
II Drive sy ste m : malfun ction! Please contact
Service
There is a n eng ine contro l ma lfu nction .
D rive slowly to an authorized Audi dea ler or au­
thorized Audi Serv ice Facility to have the engine
checked.
! '? Engine speed limitation
Ill Maximum engine speed : XXXX rpm
The engine speed is automatically limited to the
speed displayed in the instrument cluster . This
pro tects the engine from ove rheat ing.
The eng ine speed limitat ion deactivates once the
engine is no longer in the critical temperature
IJIJ,

u co ..... N
range and you have released the accelerator ped ­
a l once .
I f t he engine speed lim itation was act ivated by
an eng ine contro l m alfu nction, the
II ind icator
light also turns on. Make su re the engine speed
does not go above the speed displayed, for exam ­
p le when downshifting. Drive to an autho rized
Aud i dealer or authorized Aud i Serv ice Facility im ­
mediately to have the malfunction corrected.
--... Engine oil sensor
II Oil l evel sy stem: malfunction! Pleas e con­
tact Service
The sensor to check the engine oil level has
fa iled. Drive to an authorized Aud i dealer or au­
thor ized Audi Service Fac ility immed iate ly to have
the malfunct ion co rrected.
• O il le vel sensor : o il change necessary. Please
c ontact Service
F ue l has entered the engine oi l as a resu lt of fre­
q uent short dr ives. Avoid high engine speeds, full
acceleration and heavy engine loads. Dr ive to an
author ized Audi dealer or author ized Audi Service
Fac il ity immediately to have the oil changed .
• Oil pressure senso r: malfunction! Plea se
contact Service
There is a malfunction in the oil pressure sensor .
Drive to an authorized Audi dea ler or a uthorized
Aud i Service Facility immediately to have the
malfunct ion corrected.
f Engine warm-up request
0 Plea se driv e to warm up eng ine
F ue l has entered the eng ine oi l, either from low
outside temperatures o r frequent short drives.
Drive unt il the engine is warm so that the fue l in
the eng ine oi l wi ll evaporate. Avoid high engine
speeds, full accelerating and heavy eng ine loads
when doing this.
Bil Tank system
I"-
~ 1111 Pl ease r efu el 0 <( 0 00
Coc kpit o ver view
If the indicato r light turns on for the first time
and the message appears, there are about 2 .1
gallons (8 liters) of fuel left in the tank .
fiD Please refuel immediately
If the indicato r light turns on the message ap­
pears, the fuel ta nk is a lmost empty. Refue l the
vehicle immedia tely.
1111 Tank system: malfunction! Plea se contact
Service
There is a ma lfunction in the fuel tank system.
Drive to an authorized Audi dealer or authorized
Audi Service Facility immediate ly to have the
malfunction corrected.
(D Tips
F o r more information on f ueli ng, see
r=;, page 311 .
~ Washer fluid level
m Please add washer fluid
Fill the was her fluid for the windshie ld washer
system and the headlight washer system* when
the ignit ion is switched
off ¢ page 323 .
<it>! Windshield wipers
$ vVindshield wipers: malfunction! Please con­
tact Service
The re is a ma lfunction w ith the windshield wip­
ers.
Drive to an authori zed A udi dealer or authorized
Audi Service Facility immediate ly to have the
malfunction corrected.
~ Driver's door
II D riv er 's door : malfunction! Shift to P befo re
lea ving veh icle. Se e owner's manual
There is a ma lfunction in the driver's door. Se lect
the "P" selector lever posit ion to secure the vehi-
c le.
~
27

Opening and closing
Luggage compartment lid emergency
release
Fig. 30 Inne r luggage compartment lid : access to the
emergency release
.. Remove the screwdriver from the vehicle tool
kit.
.. Use the screwdriver to pry the cover off
<=>fig. 30.
.. Press the lever in the direct ion of the arrow to
release the luggage compartment lid .
Child safety lock
The child safety lock prevents the rear doors
from being opened from the inside and the rear
power windows from be operated.
F ig. 31 Sect ion of drive r's door: contro ls
Fig . 32 Re ar doo r: child safety lock
40
.. To deactivate/activate the power window
switch in the rear doors, press
the@ button in
the driver's
door ¢ fig. 31. The indicator light in
the button turns on/blinks .
.. To also deactivate/activate the inner door han­
dle, open the respect ive rear door and turn the
key switch with the mechanical key in the direc­
tion of the arrow or oppos ite the direction of
the arrow
¢fig. 32.
Message in the instrument cluster display
(81 Childproof catch: malfunction! Please con­
tact Service
There is a ma lfunction in the chi ld safety lock .
Press
the @ button again .
If the message stays on, drive immediate ly to an
authorized Audi dealer or authorized Audi Service
Facility to have the malfunction repaired .
A WARNING
-- If you leave the vehicle, sw itch the ignition
off and take the veh icle key with you. This
applies particularly when children remain in
the vehicle. Otherwise ch ildren could start
the engine or operate electrical equipment
(such as power windows), which increases
the ris k of an accident.
- A malfunction in the child safety lock could
allow the rear doors to be opened from the
inside, which increases the risk of an acci­
dent.
Power windows
Controls
The driver can control all power windows .
Fig. 33 Driver's doo r: power window cont rols
Cl) ~
"" 0
='> Cl) m

Lights and Vision
Turn signal and high beam lever
The lever operates the turn signals, the high
beams and the headlight flasher .
Fig. 38 Turn sig nal and high beam lever
Turn signals¢ Q
N
0 0
> u.. a,
The turn signals activate when you move the lev­
er into a turn signal position when the ignition is
switched on.
@ -Right turn signal
@-Left turn signal
The turn signal blinks three times if you just tap
the lever.
High beams and headlight flasher ~D
Move the lever to the corresponding position:
@ -High beams on (vehicles with high beam as­
sistant*¢ page 46)
©-High beams off or headlight flasher
The
II indicator light in the instrument cluster
turns on .
A WARNING
High beams can cause glare for other drivers,
wh ich increases the risk of an accident. For
this reason, only use the high beams or the
headlight flasher when they will not create
glare for other drivers.
46
High beam assistant
App lies to : vehicles with high beam ass istant
The high beam assistant automatically turns the
high beams on or off depending on the surround­
ing conditions .
A camera on the rearview mirror mount can de­
tect light sources from other road users. The high
beams switch on or off automatically depending
on the posit ion of vehicles driving ahead and on­
coming vehicles, the vehicle speed and other en­
vironmen tal and traffic conditions.
Activating high beam assistant
Requirement: the light sw itch must be set to the
AUTO posit ion and the high beam assistant must
be switched on in the Infotainment system
¢page 47 .
• To act ivate the high beam ass istant, tap the
lever
forward @~ page 46, fig . 38. The Ii] in­
dicator light appears in the instrument cluster
display and the high beams are switched on/off
automatically. If the high beams were com­
pletely or partially switched on, the
SI indica­
tor light turns on .
Switching the high beams on/off manually
If the high beams did not switch on/off automat­
icall y as expected, you may switch them on or off
manua lly instead :
• To switch the h igh beams on manually, tap the
lever
forward @~ page 46, fig. 38. The II in­
dicator light turns on.
• To switch the high beams off manually, pull the
lever back ©¢
page 46, fig. 38. The high beam
assistant is deactivated.
Operating the headlight flasher
• To operate the headlight flasher when the high
beam assistant is activated and high beams are
switched off, pull the lever back ©¢
page 46,
fig. 38.
The high beam assistant remains ac­
tive.
Messages in the instrument cluster display
EIJ Audi adaptive light: malfunction! See own­
er's manual

u co ..... N r-­N .....
~ 0 co
Version 1
To adjust the brightness of individual zones, se­
lect
Front brightness* , Door brightness or Foot­
well brightness.
Turn the control knob to th e left
or to th e right. Pr ess the control knob to confirm
the b rightness.
Version 2
Select and confirm one of the displayed profiles
by pressing the control knob.
Individual: you can customize the brightness and
color of individual zones. Press the right control
button. Press the control knob again to confirm
the settings.
Audi drive select: the interior and contour light­
ing color changes depending on the driving mode
selected in drive select*
r::?vpage 125.
(0) Tips
The setting is automatically stored and as­
signed to the remote control key that is being
used.
Instrument illumination
The brightness of the illumination for the instru­
ments, display and head-up display* can be ad­
justed.
--------... ~
i
Fig. 43 Instrument i llumination
.. Press the knob to release it.
.. Turn the knob toward "-" or" +" to reduce or in ­
crease the brightness .
.. Press the knob again to return it to its original
position.
Lights and Vision
(D Tips
Depending on vehicle equipment, the instru­
ment illumination (needles and gauges) may
turn on when the lights are off and the igni­
tion is switched on. The illumination for the
gauges reduces automatically and eventually
turns off as brightness outside increases . This
function reminds the driver to turn the low
beams on at the appropriate time.
Vision
Adjusting exterior mirrors
Fig. 44 D river 's doo r: knob fo r the ext erior mirr ors
Turn the knob to the desired position:
0
-all adjustment functions are deactivated .
q;p -adjusting the left/right exterior mirror.
Move the knob in the desired direction .
® -Heats* the mirror glass depending on the
outside temperature.
8 -Folds the exterior mirrors*. To fold the mir ­
rors out, turn the knob to one of the other posi­
tions. In the Infotainment system, you can select if the mirrors fold in automatically when you lock
the
vehicle¢ page 35 .
Front passenger's exterior mirror tilt
function*
To help you see the curb when backing into a
parking space, the surface of the mirror tilts
slightly. For this to happen, the knob must be in
the position for the front passenger's exterior
mirror.
You can adjust the tilted mirror surface by turn- ing the knob in the desired direction. When you
.,.
49

u co ..... N r-­N .....
~ 0 co
Lights and Vision
Adjusting the magnetic zone
Applies to: ve hicles with d ig ital compass
The magnetic zone must be adjusted correctly for the compass to read accurately.
Fig . 52 Magnetic zone map
• Press and hold the button @ Q page 54, fig . 51
until the number of the selected magnetic zone
appears in the rearview mirror .
• Press the button@repeatedly to select the
correct magnetic zone . The selection mode
turns off after a few seconds.
Calibrating the compass
A ppl ies to: ve hicles w ith d ig ital compass
If the display is incorrect or inaccurate, the com­
pass must be recalibrated.
• Press and hold the button @ until a C appears
in the interior rearview mirror .
• Drive in a circle at about 6 mph (10 km/h) until
a direction is displayed in the interior rearview
mirror.
A WARNING
To reduce the risk to yourself and other driv­
ers, calibrate the compass in an area where
there is no traffic.
.
55