check engine AUDI R8 SPYDER 2014 Owner's Manual
Page 151 of 244
Power steering
When the engine is running, power steering
makes it easier for the driver to steer.
Power steering he lps the driver steer the vehi
cle with little physical effort .
If the engine is not runn ing, the power steer
ing system is also not wo rking. In this case,
you will find it extreme ly difficult to turn the
steering whee l.
If you t urn t he steering fully to the le ft or
right when the vehicle is stationary, you place
a very heavy load on t he power steering sys
tem . T urning the steering wheel fu lly to the
left or r ight will cause noise in the system . It
a lso reduces engine idle speed.
(D Note
Do not hold the steering turned fully to
the left or right for more than 10 seconds
when t he engine is running. There is a risk
of damage to the power steeri ng system .
@ Tips
-In the event of a power steering system
failure, or if the eng ine is not running
(while being towed), you wi ll st ill be able
to stee r the ve hicle . However, you will re
quire more effort to do so .
- If the power steer ing system has a leak
or is defective, you should immed iately
contact a qualif ied wo rkshop.
- The powe r stee ring system requires a
spec ial hyd raulic f luid. The powe r stee r
i ng fl uid reservo ir is lo cated in the en
g ine compar tment . Th e cor re ct hydra ulic
f lui d leve l is important for p ro per opera
tion o f the power steering sys tem . The
power steer ing fl uid leve l is checked ac
cord ing to the Aud i maintenance service
schedule.
Dry sump Lubrication
H igh lateral and long itud inal forces affect the
engine and the vehicle d uring sporty driving.
Ory sump lubr ication ensures that your eng ine
Int ellig ent technolog y 149
is supplied wi th oi l and properly lubricated
even under these conditions .
In a "no rma l" veh icle the o il pump sends the
o il from the o il p an t o the lubr ication points in
t h e engine. The oi l then ret urns to the o il pan .
In extreme situations , the oil p ump may draw
in a ir, which results in insufficient oi l pressure.
Wi th dr y sump lubri cat ion, the o il is not in the
oi l pan (it is "dry"), but in a separate oil tank.
While one p ump supplies t he e ngine with oil ,
a second pump suctions the oil out of the en
gine and returns it to the oil tank. Because the
o il tank is tall and narrow, oil pressure is con
stant even under extreme conditions .
In add ition, the oi l pan in vehicles with dry
sump l ubrication is noticeab ly shallower. This
allows the engine to be installed lower in the
vehicle , bring ing down the center of grav ity .
T his imp roves your ve hicle's handling .
Driving with your
quattro ®
With all-wheel drive, all four wheels are driv
en.
General information
With a ll-wheel d rive, powe r is distr ib uted to
al l four wheels. This happens autom atic ally
depen ding on your d riving s tyle and the ro ad
conditions a t the time . See also ¢
page 144.
The all-whee l dr ive concept is des igned for
high eng ine power. Your veh icle is except ion
al ly powe rf ul and h as ex cellen t driving charac
teristics both under normal driving cond itions
and on snow and ice . Always read and follow
safety precaut ions ¢&. .
Winter tires
When dr iving in the win ter, yo ur vehicle wi th
a ll- wheel d rive h as an advantage, even w it h
regular tires. In winter road conditions it may
be advisable to mount winter tires (or all-sea
son tires) for improved driveability and brak
ing : these tires must be mounted on
all four
wheels . See also¢ page 203, Winter tires. .,..
•
•
Page 155 of 244
Driving and
environment
Break-in period
A new vehicle must be broken in, and the
break-in period should be 1,500 miles (2,500
km) . Do not use full acceleration for the first
600 m iles (1,000 km) and do not exceed the
maximum engine speed of 6,000 rpm You
must also not use full accelerat ion between
600 and 1,200 mi les (1,000 to 2,000 km).
Fr om 1,200 to 1,500 miles (2,000 to 2,500
km), you can gradua lly increase maximum en
gine speed to 8,250 rpm for brief periods.
During the first hours of operation, there is
greater friction in the engine and the trans
mission than later when all the moving parts
have broken in.
The way you drive during the first 1,500 miles
(2,500 km) affects engine quality. If you drive
at moderate eng ine speeds thereafter, partic
ularly when the engine is cold, you reduce en
gine wear and increase the potential mileage
of the engine.
Do not drive at RPMs that are too
low. Shift
down when the engine is no longer running
"smoothly". Extreme ly high RPMs are gov
erned automatically.
Avoid damaging the
vehicle
When you are driving on poor roads, or over
curbs, steep ramps, etc., make certain that
low-lying parts such as spoilers and exhaus t
system parts do not bottom out and get dam
aged.
This is especially true for vehicles with low
slung chassis (sports chassis) and fully loaded
veh icles.
Driving and environment 153
Driving through water
on roads
Note the following to avoid vehicle damage
when driving through water, for example on
flooded roads:
- The water must not be any higher than the
bottom of the vehicle body.
- Do not drive faster than walking speed .
A WARNING
After driving through water, mud, slush,
etc ., the brakes may be slow to take effect
because of wet brake rotors and pads . Dry
the brakes first by braking carefully to re
store the full braking effect.
(D Note
Vehicle components such as the eng ine,
transmission, suspension or electrical sys
tem can be severe ly damaged by dr iv ing
th rough water.
(D Tips
- Check the depth of the water before d riv
ing through it.
- Do not stop the vehicle, drive in reverse
or switch the engine off when driving
through water.
- Keep in mind that oncoming vehicles
may create waves that ra ise the water
level and make it too deep for your vehi
cle to drive through safely.
- Avo id driving through salt water because
it can cause corrosion.
Catalytic converter
It is very important that your emission con
trol system (catalytic converter) is function
ing properly to ensure that your vehicle is run
ning in on environmentally sound manner .
.,. Always use lead-free gasoline ~ page 167,
Fuel supply .
.,. Never run the tank down all the way to emp-
~. ~
•
•
Page 167 of 244
(D Note
-Never use chemical solvents (e.g . lighter
flu id, turpentine), waxes, shoe polish or
s imilar products on Alcantara ® surfaces.
- To avoid damage, have stubborn stains
removed by a commercia l cleaning spe
cialist.
- Do not use brushes, stiff sponges or sim
ilarly abrasive cleaning aids.
Safety belts
Heavily soiled safety belts may not retract
properly .
~ Keep belts clean.
~ For cleaning, use a mild soap and water sol
ution. Let belts dry thoroughly and away
from direct sunlight.
~ Do not allow inertia reel safety belts to re
tract before they are completely d ry.
~ Check the condition of your safety belts reg
ularly.
A WARNING
Damaged safety belts can break in a crash.
- Any thing tha t might damage you r safety
belts co uld mean that you and your pas
sengers wo uld not be adequately pro
tected in an accident.
- Safety belt performance depends on cor rect installation . Never remove belts
from the vehicle to clean them.
- Do not use chemical cleaning agents,
bleach o r dyes . They have corrosive prop
erties which weaken the webbing.
- When cleaning your safety belts, inspect
them for damage. If you discover dam
age, see your authorized Audi dea ler.
- Always read and heed all WARNINGS and
the informat ion
¢page 156.
1) Use o nly the correct cleaning sol utio ns. Neve r use gas
oline or d iese l fuel.
Cleaning and protec tion
Engine compartment
Be especially careful when cleaning the en
gine compartment.
Corrosion p rotection
The engine compartment and transmission
have been corrosion-protected at the factory.
Good anti-corrosion treatmen t is very impor
tant, partic ularly in the winter.
If the vehicle
is frequently driven on salt treated roads, the
entire engine compartment and plenum panel
shou ld be thoroughly cleaned at the end of
winter and retreated to prevent salt damage .
At the same time, the underside of the veh icle
shou ld be washed as well.
If the engine compartment is cleaned at any
time with grease remov ing solutions
1>, or if
you have the engine washed, the a nti-corro
s ion treatment is almost always removed as
well.
It i s therefo re essentia l to have a long
lasti ng corrosion protection reapplied to all
su rfaces, seams, joints and components in the
engine compa rtment .
A WARNING
--=
Be aware: The eng ine compartment of any
motor veh icle is a potentially hazardous
area.
- Before work ing in the engine compart
ment, be sure to read the information
¢page 172.
-Before reaching into the front p lenum
panel, a lways remove the ignit ion key.
Otherwise, the w indshield wiper system
could u nintentionally be sw itched on,
possibly caus ing persona l injury from the
mov ing wipe r linkage.
- Never reach i nto the area around or
touch the rad iator fan. The aux iliary fan
is tempe ratu re controlled and ca n sw itch
on s uddenly -even when the ignition is
off. .,.
165
•
•
Page 174 of 244
17 2 Che cking and filling
Checking and filling
Engine compartment
Lid
Releasing the engine compartment lid
The engine compartment lid is released from
in side the vehicle.
Fi g. 1 34 Drive r's s id e: re le asi ng th e eng ine co mpart
ment lid
R equ irement : The ignition must be sw itched
on.
.,. Make sure the rear spoiler is retracted
<=> page 148 .
.,. Pull the button @. The e ngine compart
ment lid opens slightly .
.,. Ope n the engi ne compa rtme nt lid
c:> .&, .
.&_ WARNING
Hot engine coo lant can burn you. To re
duce the risk of bei ng bur ned,
neve r open
the engine compartment lid if yo u see or
hear steam or coolant escaping from the
eng ine compartment. Wa it until no steam
or coolant can be seen or heard before
carefu lly opening the engine compartment
lid .
CD Note
To prevent damage to the vehicle, only
ope n the engi ne compartment lid when
t he convertib le top storage bay lid is
closed .
(D Tips
An emergency re lease can be used i f th e
engine compartment lid cannot be re
l eased with the
button @r::::>page 172.
Engine compartment lid emergency
release
The emergency release loop is located under
the right trim panel near the front passenger
seat.
F ig . 1 35 Fro nt passenger footwe ll: em erge ncy release
l oop
.,. Make sure the rear spo iler is retracted
<=> page 148 .
.,. Pull the loop forwa rd to release the engine
compa rtme nt lid . The engine compar tment
lid o pens s lig htly .
.,. Open the eng ine comp artmen t lid
c:> .&, in
Releasing the engine compartment lid on
page 172 .
CD Note
To preven t dam age to the vehicle, only
open the en gine compartment lid when
the convert ible top stora ge bay lid is
closed.
Working in the engine compartment
Be especially careful whenever you work in
the engine compartment!
Whenever you mu st perform any work in the
engine compartment, for example checking and filling the different fluids, there is a risk
of injury, burn s and accidents. To prevent
personal injury always observe the following
Ill-
Page 175 of 244
WARNINGS. The engine compartment of any
vehicle is a hazardous area!
c::> &.
A WARNING
To help avoid injury, before you check any
thing under the engine compartment lid:
- Switch off the engine.
- Remove the ignition key.
- Apply the parking brake.
- Move selector lever of S tronic to "N"
(Neutral); put manual transmission in
Neutral.
- Always let the engine cool down. Hot
components will burn skin on contact.
- To reduce the risk of being burned, never
open the engine compartment lid if you
see or hear steam or coolant escaping
from the engine compartment. Wait un
til no steam or coolant can be seen or heard before carefully opening the en
gine compartment lid .
- Keep children away from the engine com
partment .
-Never spill fluids on hot engine compo
nents. They can cause a fire.
- Never open the coolant reservoir cap when the engine is still warm. The coolant system is pressurized and hot cool
ant could spray out.
- Protect your face, hands and arm from
steam or hot engine coolant by placing a
thick rag over the cap when you open the
coolant reservoir .
- Do not remove the engine cover under
any circumstances. This increases the
risk of burns.
- If work on the fuel system or the electri
cal system is necessary:
- Always disconnect the battery.
- Never smoke or work near heaters or
open flames. Fluids in the engine com
partment could start a fire.
- Keep an approved fire extinguisher im
mediately available.
- To avoid electrical shock and personal in
jury while the engine is running or being
started, never touch:
Checking and filling 173
- Ignition cables
- Other components of the high voltage electronic ignition system.
- If you must perform a check or repair
with the engine running:
- First, fully apply the parking brake,
move selector lever of S tronic to "N"
(Neutral); put manual transmission in
Neutral.
- Always use extreme caution to prevent
clothing, jewelry, or long hair from get
ting caught in the radiator fan, V-belts
or other moving parts, or from contact ing hot parts. Tie back hair before
starting, and wear no clothing that will hang or droop into the engine.
- Minimize exposure to emission and chemical hazards
c::> .&. .
A WARNING
California Proposition 65 Warning:
- Engine exhaust, some of its constituents,
and certain vehicle components contain
or emit chemicals known to the State of
California to cause cancer and birth de
fects and reproductive harm. In addition, certain fluids contained in vehicles and
certain products of component wear con
tain or emit chemicals known to the
State of California to cause cancer and birth defects or other reproductive harm.
- Battery posts, terminals and related ac
cessories contain lead and lead com
pounds, chemicals known to the State of
California to cause cancer and reproduc
tive harms. Wash hands after handling.
@ Note
When adding fluids, always make sure that
they are poured into the proper container
or filler opening, otherwise serious dam
age to vehicle systems will occur.
@ For the sake of the environment
To detect leaks in time, inspect the vehicle
floor pan from underneath regularly. If
you see spots from oil or other vehicle
IJI>
•
•
Page 176 of 244
17 4 Che cking and filling
fluids, have your vehicle inspected by an
authorized Audi dealer.
Closing the engine compartment lid
.. Make sure that the rear spo iler is retracted
¢ page 148.
.. Pull the engine compa rtment lid dow n until
the p ress ure from the struts is reduced .
.. Pr ess the eng ine compartment lid closed
¢ &_ .
Eng ine compartment
A WARNING
-- W hen you close the engine compartment
lid, chec k it to make su re the safety catch
has prope rly engaged . The engine com
pa rtment lid s ho ul d be flush w ith the
sur ro un ding vehicle body parts .
- If you notice while driv ing t hat the en
g in e compartmen t lid is not secu red
p roperly, sto p at once and cl ose it .
These ore the most important items that you con check .
Fig . 136 Ty pica l layout fo r co ntai ners , e ngin e o il dipst ick and engin e o il fille r cap (man ual t ra n sm iss io n)
F ig . 1 37 Typ ica l layout fo r co ntain ers, e ngin e o il d ipstic k and e ng in e o il fill er cap (S t ro nic )
W ith manual transmission: @ Engine oil f iller cap(~) ,
(D Power steering f luid rese rvoir
@ E ngine o il d ipst ick ...... .... .
(@) ... .... .... ....... .. .. . 14 9
180
178 ....
Page 177 of 244
With S tronic transmission:
(!) Powe r steeri ng fluid rese rvoir
(~ ) ... .. ................ . . 149
@ Engine oi l filler cap ("1::r.) with
engine oil dipstick, ........ .. 180, 179
A WARNING
Before you ch eck a nything in the engine
compartment, always read and heed all
WARNINGS
~ A in Working in the engine
compartment on page 173.
@ Tips
The coolant expansion tank is located un
der the convert ible top storage bay lid
~page 183.
Engine oil
Engine oil specifications (8-cyl.-engine )
The engine in your Audi needs the right kind
of oil.
-
The engine in your Audi is a soph istica ted
powerp lant tha t was b uilt to exacting specifi
cations . This engine needs the r ight kind of
engine oi l that meets specifications regarding
qua lity and viscosity so that it can run
smoothly and reliably. Choos ing the right oi l
and changing oil within the time and mileage intervals printed in your veh icle's Warranty
&
Ma intenance book let matters a lot more to
day than it d id yea rs ago. A udi has developed
a special quality standa rd for engine oil that
will he lp assure tha t your veh icle's eng ine will
get the lubrica tion it needs for prope r opera
tion.
M odern eng ine lub rication has taken a quan
t um leap in the last few yea rs. Ma ny synthetic
oils availa ble today provide be tter eng ine lu
b rica tion that can outlast traditional pe trole
um-based o ils, making them a smart choice
for use throughout the life of your A udi.
Whether yo u use syn thetic or petroleum
based engine oil, the oil that yo u use must
conform to Audi's oil qua lity standard VW S02
00 to help keep your vehicle's engine running
Checkin g and fillin g 175
smooth ly and he lp prevent the format ion of
harmful deposits, sometimes ca lled "s ludge,"
that over time can lead to expensive repairs.
At the time of prin ting, engine oils ava ilab le in
t h e U.S . and Canada that meet the exacting
specifications of Audi oi l standard VW 502 00
are synt het ic eng ine oi ls . Th is does not mean,
however, that every synthetic engine oil will
meet Audi o il standard VW 502 00. So always
be sure that you use an approved oil.
To he lp prevent the formation of harmfu l de
pos its use on ly oil with the following specifi
cations pr inted on the o il conta iner:
Audi oil standard VW 502 00
Oil containe r labels m ay car ry the s peci fica
t ion sing ly or in combina tion wi th othe r desig
na tions and oil quality s tanda rds .
Viscosity
Engine o ils are graded accord ing to thei r vis
cosity. The p roper viscos ity grade oil fo r yo ur
engine depends o n climactic or seasona l con
ditions where yo u drive. You must use oil w it h
a v isco sity g rade of SA E 5W-30 all temper a
tu re ranges fo r norma l d riving condi tions.
Because eng ine o il that meets the Audi oil
sta ndard may not be availab le everyw here
whe n you need i t, we strong ly reco mmend
t h at you a lways carry wit h you an ex tra quart
( li ter) of oil that exp ress ly con forms to the
VW 502 00, in case you have to top
off the oil
whi le on the road.
Only if the level of the o il is at or be low the
minimum ma rk on the oi l dipstick -and no oil
that expressly conforms to Audi oi l VW 502
00 is ava ilab le -may you top
off with a h igh
quality eng ine o il, preferab ly synthetic-based,
that meets ACEA A3 or API SM specifications. However, duri ng the entire time between oi l
c h ange in tervals, neve r top
off w ith more tha n
a total of 1 qt/lite r engine oil that does not
confo rm to Aud i oil spec ifi cat ion VW 50 2 00.
For more information abo ut eng ine oi l that
has been approved for your veh icle, please
contact e ither you r autho rized Aud i dea le r o r ..,.
•
•
Page 178 of 244
176 Check ing and filling
Audi Customer Relations at 1 (800) 822 -2834
or visit our web site at www .audiusa .com or
www.audicanada .ca. Here you will a lso find a
current lis t of oils (manufacturers, brand
names etc.) that conform to Audi o il standard
vw 502 00 .
Changing the engine oil
The engine oil and o il filter must be changed
according to the mi leage (ki lometers) and
time interva ls specified in your vehicle's War
ranty
& Maintenance booklet . Do not exceed
these intervals -harmful depos its from old
engine o il can reduce engine performance and
can lead to expensive engine repairs .
C hanging the o il at the recommended inter
va ls is so very important because the lubricat
ing properties of oi l decrease gradually during
normal vehicle use. If you are not sure when
you have your o il changed, ask your author
ized A udi Service Advisor .
Under some circumstances the engine o il
should even be changed more frequently .
C hange o il mo re often if you dr ive mostly
short d istances , operate the vehicle in dusty
a reas or mostly under s top-and -go traffic con
d itions , or when yo u use your veh icle whe re
temperatures stay below free zing point fo r
l ong periods .
D etergent add it ives i n the o il w ill ma ke fresh
oil look dark after the eng ine has been run
n ing fo r a shor t time . This is no rma l and is not
a reason to change the oi l more often than
recommended.
Damage or malfun ction s due t o lack of
maintenance
I t is essential that you change your oil at the
r ecommended in te rvals using only engine o il
th at compl ies wi th A udi oil st andard VW 502
00. Yo ur Limited New Veh icle War ran ty does
not cover damage or malfunctions due to fa il
ure to follow recommended maintenance and
use requ irements as set forth in the A udi
Owner's Manual and Warranty
& Ma intenance
bookle t. Your authori zed Audi dealer will have
to deny warranty coverage un less you present to the dealer proof in the form of Service o
r
Repair Orde rs that all sched uled maintenance
was per formed in a time ly manner .
Engine oil specifications (10-cyl.
engine)
App lies to vehicles: wit h IO -cy linder -engine
The engine in your Audi needs the right kind
of oil.
The engine in your A udi is a sophisticated
powerplant that was built to exact ing spec ifi
cations . T hi s eng ine needs the right k ind of
engi ne oil that meets specifications regarding
quality and v iscosity so that it can run
smoothly and reliably. Choosing the rig ht o il
and changing oil within the t ime and mileage
in tervals p rin ted in you r vehicle's Wa rra nty
&
Mainten ance booklet matte rs a lot more to
day than it did years ago . Aud i has deve loped
a specia l quality sta ndard for engine oi l th at
will help assure that your vehicle's engine wi ll
get the lubr ication it needs for proper opera
t ion.
Modern engine lubrication has ta ken a quan
tum leap in the last few years . Many synthetic
o ils available today provide better engine lu
brication that can outlast tradit ional petrole
um-based oils, making them a sma rt cho ice
for use throughout the life of your Audi .
Whether you use synthetic o r pet ro le um
based engine oil, the oil that you use must
conform to Aud i's oil quality standards
VW 50 1 01 or VW SOS 00 and m ust have a
viscosity of SAE lOW-60 to help keep your ve
hicle's engine running smoo thly a nd he lp p re
ven t the forma tion of h armf ul deposits,
some times called "s ludge," tha t over t ime can
l ead to expensive repairs.
At the time of pr int ing, engi ne oils ava ilable in
t h e U.S. and Canada th at meet the exac ting
spec ifica tions of Audi oil s tanda rds
VW 50 1 01 or VW SOS 00 with the viscosity of
SAE lOW-60 are synthetic engine oils. This
does not mean, however, that every synthet ic
engine oil will meet Audi oil standards
1111>
Page 179 of 244
VW 501 01 or VW SOS 00. So always be sure
that you use an approved oil.
To help preve nt the formation of harmful de
posits use only oi l with the fo ll ow ing spec ifi
cations printed on the oil containe r:
Audi oil standard s VW 501 01 or VW 505 00
and must have the v iscosity of SAE l0W-60 .
Oil conta iner labe ls may ca rry the specif ica
tion s ingly or in comb inat ion with other des ig
nations and oil qua lity standards .
Viscosity
Eng ine oi ls are graded according to the ir vis
cosity. The prope r viscosi ty grade o il for your
engine depends on climactic or seasonal con
ditions where you drive. Yo u m ust use oil with
a viscos ity grade of SAE lOW-60 all tempera
ture ranges for norma l dr iv ing cond itions .
B ecause engine oil that meets the A udi oil
standard may not be available everywhere
when yo u need it, we strongly recommend
that you always carry with you an extra q uart
(liter) of o il that expressly conforms to the
VW 501 01 or VW SOS 00 specifications
which must have the viscosity of SAE lOW-60,
in case yo u have to top
off th e oil whi le on the
r oad.
Only if the level of the oi l is at o r below the
minimum mark on t he oil dipstic k -and no oil
that express ly co nforms to Aud i oil
VW 501 01 or VW SOS 00 spec ifications
whi ch mus t have the vis cosity o f SA E lOW-60
i s available -may you top
off w ith a hig h qua li
ty engine oil, prefe rably sy nthetic -based, that
meets ACEA A3 or API SM specifications . How
eve r, d uring the entire t ime between oil
change inte rva ls, never top
off with more than
a tota l of 1 qt/liter engine o il that does not
conform to Audi o il specifications VW 501 01
or VW SOS 00 w ith the viscosity of SAE
lOW-60 .
For more informat ion about engine oil that
has been approved for your vehicle, please
contact either your author ized Audi dealer or
Aud i Customer Relations at 1 (800) 822-2834
Checkin g and fillin g 177
or vis it o ur web site at www .audiusa .com or
www.au dicanada.ca . Here you wi ll also fi nd a
current list of oi ls (manufacturers, bran d
names etc.) that conform to Audi oil stand
ards VW 501 01 or VW 505 00 w ith the vis
cosity of SA E lOW -60 .
Changing the engine oil
The eng ine o il and o il fi lter m ust be changed
according to t he mileage (ki lometers) and
time intervals specified i n your ve hicle's War
ranty
& Ma intenance booklet . Do not exceed
these interva ls - harmful deposits from old
engine oil can red uce engine performance and
can lead to expensive eng ine repairs.
Changi ng the oil at the recommended inter
vals is so very important because the l ubricat
i ng proper ties of oil decrease gradually d uring
no rma l veh icle use . If you a re not s ure when
you have your o il cha nged, ask your author
ized Audi Serv ice Adv isor.
Under some circumstances the engine oil
sho uld eve n be changed more frequent ly .
Change oil mo re often if you dr ive most ly
sho rt distances, operate the ve hicle in dusty
areas o r most ly under stop-and -go traff ic con
di tions, o r when you use your veh icle where
temperatures s tay be low freezing point for
l ong pe riods .
Dete rgen t additive s in the oil will make fres h
o il look d ark after the engine has been ru n
ning for a sho rt time. This is no rmal and is not
a reaso n to change the oil more often t han
recommended.
Damage or malfunctions due to la ck of
maintenance
It is essential that you chang e you r o il at the
r ecommended in tervals usi ng on ly engi ne oil
that complies with Audi o il stand ards
VW 50 1 01 or VW SOS 00 an d must have the
viscosity of SAE lOW -60. Yo ur Limited New
Vehicle Warranty does not cover damage or
malfunctions due to failure to follow recom
mended maintenance and use requ irements
as se t forth in the Audi Owner's Manual and
Warranty
& Ma intenance booklet . You r I),
•
•
Page 180 of 244
1 78 Che cking and filling
authorized Audi dealer will have to deny war
ranty cov erage un less you present to the dea l
er proof in the form of Serv ice o r Repair Or
ders tha t all sched uled maintena nce was per
f ormed in a t imely manner .
Engine oil consumption
T he engine in your vehicle depends on an ade
quate amoun t of oil to lubricate and cool all
of its moving par ts.
In order to provide effective l ubrication and
cooling of internal engine components, a ll in
ternal comb ustion eng ines consume a certa in
amount of o il. O il consumption var ies from
engine to eng ine and may c hange significa ntly
over the life of the eng ine . T ypically, eng ines
with a specifie d break-in per iod (see
c::> p oge 153) consume more oil during the
b reak-in per io d t han they co nsume after oil
consumption has sta bilized.
Unde r no rma l conditions, the rate of oil con
sum ption depends on the qu ality and vi scosity
of the oi l, the R PM ( revo lutions per m inute) at
which t he engine is ope rated, the ambient
temperature and road cond itio ns. Furthe r fac
tors are the amount of o il d ilution from water
condensation or fuel residue and the ox ida
ti on level of the oi l. As any engine is subject to
wear as mileage bu ilds up , the oil consump
tion may increase over t ime until replacement
of worn componen ts may become necessary.
W ith all these variables com ing into play, no
standa rd rate of o il consumption can be es
tablished or specif ied . T he re is no alternative
to regular and frequent checking of the oil lev
e l, see
Note .
If the ye llow eng ine o il level warning symbol
i n t he inst rument cluster
1\1 lights up, you
should check the o il l evel as soon as possibl e
c::> page 178. Top off the oil at you r earliest
conven ie nc e
c::>page 180.
_& WARNING
Before yo u check any thin g in t he engine
compartment , always read and hee d all
-
WAR NIN GS c::> & in Working in the engine
compartment on page 173.
(D Note
D riving wit h an insufficient o il level is like
l y to cause severe dama ge to the e ngine.
(D Tips
- The oil pressure warning display. is
not an indicator of the oil level. Do not
rely on it. Instead, check the oil level in
your engine at regular intervals , pref
erably each time you refuel, and always
before going on a long trip .
- If
you have t he impression yo ur engine
cons umes excessive amounts of o il, we
recommend that you consu lt your Aud i
deale r to have the cause of your concer n
prope rly diagnosed . K eep in m ind that
th e accu rat e meas urement of o il con
s u m ptio n re quires grea t care and may
t a ke some time. Y our Audi de aler h as i n
st ru ctio ns abou t how to measure oil con
sumption acc urately .
Checking the engine oil level
Applies to vehicles: with manual transmiss ion
Fig . 1 38 In st ru men t cl uste r: E ng in e oi l te m pe ratu re
d isp lay
Fig. 139 M arkers on o il dip stick