lock AUDI S4 1995 B5 / 1.G 01E Transmission Clutch Release Mechanism Workshop Manual
Page 2 of 9
30-28
6 -
Clutch release lever
Removing Fig. 3Must engage in the lugs in intermediate
piece when installed Fig. 4
Before installing, coat contact surface of
clutch slave cylinder push rod with a thin
layer of copper grease, e.g. Z381 351 TE
7 -
Leaf spring
8 -
Bolt, 25 Nm Self-lockingAlways replace
9 -
Release bearing Do not wash out, wipe clean onlyReplace noisy bearingsRetainer lugs on release bearing must
engage in release lever
Pa
ge 2 of 9 Clutch release mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.30.2
Page 3 of 9
30-29
10 -
Clutch slave cylinder
Bleeding clutch system Page 30
-25
Removing and installing Page 30
-32
When installing, push on until the securing
bolt can be fitted
11 -
Bolt, 20 Nm Self-lockingAlways replace
12 -
Bracket for hose/line assembly Engage in clutch slave cylinder
13 -
Push rod Coat contact surface of push rod with
copper grease, e.g. Z 381 351 TE
Pa
ge 3 of 9 Clutch release mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.30.2