ECU AUDI S4 1997 B5 / 1.G 01E Transmission Final Drive Differential Remove And Install Workshop Manual
Page 1 of 8
39-112
Differential, removing and
installing Note:
General repair instructions Page 00
-11
.
Secure final drive on a repair stand Page 39
-
108
.
Adjustments are required when replacing
components marked 1) Page 39
-150
,
Adjustment overview
1 -
Breather sleeve
With rubber valveInstallation position Fig. 3
2 -
Final drive housing
1)
With drive pinionRemoving and installing drive pinion
Page 39
-134
Pa
ge 1 of 8 Differential, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.16
Page 5 of 8
39-116
Fig. 1 Removing and installing drive flange
- To loosen securing bolt, screw two bolts into drive flange and counter-
hold with a lever.
- Pull out drive flange using bolts already screwed in.
Fig. 2 Pressing cover onto stop
Pa
ge 5 of 8 Differential, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.16
Page 7 of 8
39-118
Removing and installing differential
Rear final drive removed
Special tools, testers and auxiliary items
Drip tray V.A.G 1306
Removing
- Secure complete rear final drive on a repair
stand Page 39
-108
.
- Place drip tray V.A.G 1306 underneath and
drain oil.
- Fill space between sealing lip and dust lip with
sealing grease G52 128 A1.
- Remove left and right-hand drive flanges.
- To loosen securing bolt, screw two bolts into drive flange and counter-
hold with a lever.
- Mark drive flanges (for left and right sides).
- Pull out drive flange using the bolts already screwed in.
- Unscrew securing bolts from cover for final drive.
- Take cover for final drive off axle housing and remove differential.
Pa
ge 7 of 8 Differential, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.16