remove seats AUDI S5 COUPE 2016 User Guide

,-1 N
0 1-CX)
,-1 I.Cl U"I
,-1 I.Cl ......
Description
The lower anchorage positions are marked for
quick locating .
Fig. 147 Lower anchorages, covers marked
Fig. 148 Rea r seats : lower ancho rage bracke t locatio ns
Lower anchorages
The lower anchorage attachment points are lo­
cated on the rear end of the rear seatback.
Remove the covers
ca:> fig. 147 to access the lower
anchorage attachment points.
The lower anchorage attachment points are visi­ ble
ca:> fig. 148 .
Lower anchorages secure the child restraint in
the seat without using the vehicle's safety belts.
Anchorages provide a secure and easy -to -use at ­
tachment and minim ize the possibility of improp­
er ch ild restraint installation .
All ch ild restraints manufactured after Septem­
ber 1, 2002, must have lower anchorage attach ­
ments for the
LATCH system .
Remember that the lower anchorage points are
only intended for installation and attachment of
child restraints specifically certified for use with
LATCH lower anchorages. Child restraints that
are not equipped with the lowe r anchorage at-
Child safety
tachments can still be installed in compliance
with the child restraint manufacturer 's instruc­
tions on using vehicle safety belts.
A WARNING
-Improper use of LATCH lower anchorages can
cause serious personal injury in an accident.
- Always carefully follow the child restraints
manufacturer's instructions for proper in­
stallat ion of the child restraint and proper
use of the lower anchorages or safety belts
in your vehicle .
- Never secure or attach any luggage or other
items to the
LATCH lower anchorages.
- Always read and heed the important infor­
mat ion about ch ild restraints in this chapter
and WARNINGS
~page 151, Child safety.
Installing a child restraint with LATCH
lower anchorages
Whenever you install a child restraint always fol­
low the child restraint manufacturer's instruc­
tions.
Fi g. 149 Lower ancho rages : prope r mount ing
Mounting
.,. Make sure the seatback of the rear seat bench
is in the upright position and secure ly latched
in place .
.,. Attach both hook-on connectors with the spring
catch release on the child safety seat onto the LATC H lower anchorage so that the con nectars
lock into place~
fig. 149 .
.,. Pull on the connector attachments to make
sure they are properly attached to the LATCH
lower anchorage.
165