BMW 2 SERIES COUPE 2017 Manual PDF

'yOn uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.'yOn uphill grades or on a downhill slope,
also secure the vehicle, e.g., with a wheel chock.'

Malfunction
Unusually rapid flashing of the indicator lamp indicates that a turn signal bulb has failed.
High
beams,
headlight
flasher
Push the lever forward or pull it backward.'yHigh beams on, arrow 1.'yHigh beams off/headlight flasher, arrow 2.
Washer/wiper
system
General
information
Do not use the wipers if the windshield is dry, as this may damage the wiper blades or causethem to become worn more quickly.
Safety
information WARNING
If the wipers start moving in the folded
away state, body parts can be jammed or damj age may occur to parts of the vehicle. There isa risk of injury or risk of property damage.Make sure that the vehicle is switched offwhen the wipers are in the folded away stateand the wipers are folded in when switchingon.'

Interval
mode
or
rain
sensor
Concept
The rain sensor automatically controls the time between wipes depending on the intensity ofthe rainfall.
General
information
The sensor is located on the windshield, dij
rectly in front of the interior mirror. Without the
rain sensor, the frequency of the wiper operaj
tion is preset.
Safety
information NOTE
If the rain sensor is activated, the wipers
can accidentally start moving in vehicle
washes. There is a risk of property damage. Deactivate the rain sensor in vehicle washes.'

Cleaning
the
windshield
Pull the lever.
The system sprays washer fluid on the windj shield and activates the wipers briefly.
In addition, the headlights are cleaned at reguj lar intervals when the vehicle's lights are
switched on.
Windshield
washer
nozzles
The washer jets are automatically heated whenever the ignition is switched on.
Fold-away
position
of
the
wipers
Concept
The wipers can be folded away from the windj shield in the fold-away position.
General
information
Important, e.g., when changing the wiper
blades or when folding out under frosty condij tions.
Safety
information WARNING
If the wipers start moving in the folded
away state, body parts can be jammed or damj
age may occur to parts of the vehicle. There is
a risk of injury or risk of property damage. Make sure that the vehicle is switched offwhen the wipers are in the folded away stateand the wipers are folded in when switchingon.'

Washer
fluid
General
information All washer nozzles are supplied from one resjervoir.
Use a mixture of tap water and windshield washer concentrate. If desired, a windshield
washer concentrate containing antifreeze can
be used.
Recommended minimum fill quantity:
0.2 US gal/1 liter.
Safety
information WARNING
Some antifreeze agents can contain
harmful substances and are flammable. There
is a risk of fire and a risk of injury. Observe the instructions on the containers. Keep antifreeze
away from ignition sources. Do not refill operj
ating materials into different bottles. Store opj
erating materials out of reach of children.
United States: the washer fluid mixture ratio is
regulated by the U.S. EPA and many individual states; do not exceed the allowable washer
fluid dilution ratio limits that apply. Follow the
usage instructions on the washer fluid conj
tainer.
Use of BMWss Windshield Washer Concenj
trate or the equivalent is recommended.'

'yOn uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.'yOn uphill grades or on a downhill slope,
also secure the vehicle, e.g., with a wheel chock.'

opened, and the brake pedal is not dejpressed.
Engaging
selector
lever
positions
General
information
To prevent the vehicle from creeping after you
select a drive mode, maintain pressure on the
brake pedal until you are ready to start.
Functional
requirements Only when the engine is running and the brake
pedal is depressed is it possible to change
from selector lever position P to another selecj
tor lever position.
Engaging
selector
lever
position
D,
N, R
A selector lever lock prevents the following
faulty operation:
'yUnintentional shifting into selector lever position R.'yUnintentional shifting from selector lever
position P into another selector lever posij
tion.1.Press and hold the button to release the
selector lever lock.2.With the driver's safety belt fastened,
briefly push the selector lever in the dej sired direction, past a resistance point, if
needed. The selector lever automaticallyreturns to the center position when rej leased.
Engaging
selector
lever
position
P
Press button P.
KickdownKickdown is used to achieve maximum driving
performance.
Step on the accelerator pedal beyond the rej sistance point at the full throttle position.
Sport
program
M/S
Concept
The shifting points and shifting times in the Sport program are designed for a sportier drivjing style. The transmission, for instance shifts
up later and the shifting times are shorter.
Seite 77DrivingControls77
Online Edition for Part no. 01402977734 - II/17

Activating
the
sport
program
Press the selector lever to the left out of selecj
tor lever position D.
The engaged gear is displayed in the instruj ment cluster, for instance S1.
The sport program of the transmission is actij
vated.
Ending
the
Sport
program Push the selector lever to the right.
D is displayed in the instrument cluster.
Manual
mode
M/S
Concept
Manual gear-shifting is possible in manual mode.
Activating
manual
mode
Press the selector lever to the left out of selecj
tor lever position D, arrow 1. Next, push the sej lector lever forward or pull it backward, arjrow 2.
Manual mode becomes active and the gear is
changed.
The engaged gear is displayed in the instruj
ment cluster, for instance M1.
Shifting To shift down: press the selector lever forward.
To shift up: pull the selector lever rearwards.
The transmission continues shifting automatij cally in certain situations, for instance when
speed limits are reached.
Steptronic
Sport
transmission:
prevent
automatic
upshifting
in
M/S
manual
mode
The Steptronic Sport transmission does not
automatically upshift in M/S manual mode
once the maximum speed is reached, if one of
the following conditions is met:'yDSC deactivated.'yTRACTION activated.'ySPORT+ activated.
Depending on the BMW M drive configuration, this function is active independently of the
above-specified conditions.
In addition, there is no downshifting for kickj
down.
With the respective transmission version, the
lowest possible gear can be selected by simulj
taneously operating the kickdown and the left
shift paddles. This is not possible by switching briefly via the shift paddles from selector lever
position D to manual mode M/S.
Ending
the
manual
mode Push the selector lever to the right.
D is displayed in the instrument cluster.
Seite 78ControlsDriving78
Online Edition for Part no. 01402977734 - II/17

Shift
paddles
Concept
The shift paddles on the steering wheel allow you to shift gears quickly while keeping both
hands on the steering wheel.
General
information
Shifting
The vehicle only shifts at suitable engine and
road speeds.
Short-term
manual
mode
In selector lever position D, actuating a shift
paddle switches into manual mode temporaj
rily.
After conservative driving in manual mode
without acceleration or shifting via the shift
paddles for a certain amount of time, the transj
mission switches back to automatic mode.
With some transmission versions it is possible
to switch into automatic mode as follows:'yPull and hold right shift paddle.'yIn addition to the briefly pulled right shift paddle, briefly pull the left shift paddle.
Continuous
manual
mode
In selector lever position S, actuating a shift paddle switches into manual mode permaj
nently.
Shifting
'yTo shift up: briefly pull right shift paddle.'yTo shift down: briefly pull left shift paddle.'yWith the respective transmission version,
the lowest possible gear can be selected
by pulling and holding the left shift paddle.
The selected gear is briefly displayed in the inj
strument cluster, followed by the current gear.
Displays
in
the
instrument
cluster The selector lever position is disjplayed, for example P.
Electronic
unlocking
of
the
transmission
lock
General
information
Electronically unlock the transmission lock to
maneuver vehicle from a danger area.
Unlocking is possible, if the starter can spin the
engine.
Before unlocking the transmission lock, set the
parking brake to prevent the vehicle from rollj
ing away.
Engaging
selector
lever
position
N
1.Press and hold down brake pedal.2.Press the Start/Stop button. The starter
must audibly start.3.Press the button on the selector lever, arj
row 1, and press and hold the selector lever into selector lever position N, arjrow N, until selector lever position N is disjplayed in the instrument cluster.Seite 79DrivingControls79
Online Edition for Part no. 01402977734 - II/17

A Check Control message is displayed.4.Release the selector lever.5.Release brake, as soon as the starterstops.6.Maneuver the vehicle from the danger areaand secure it against moving on its own.
For additional information, see the chapter ontow-starting and towing.
Steptronic
Sport
transmission:
Launch
Control
Concept
Launch Control enables optimum acceleration
on surfaces with good traction under dry surj rounding conditions.
General
information
The use of Launch Control causes premature
component wear since this function represents
a very heavy load for the vehicle.
Do not use Launch Control during the break-in,
refer to page 164, period.
To start with Launch Control do not steer the steering wheel.
Functional
requirements
Launch Control is available when the engine is
warmed up, that is, after uninterrupted driving
of at least 6 miles/10 km.
Start
with
launch
control
While the engine is running:1. Press button or select Sport+ with
the Driving Dynamics Control.
TRACTION is displayed in the instrument
cluster and the indicator light for DSC OFF
lights up.2.Engage selector lever position S.3.With the left foot, forcefully press down on
the brake.4.Press and hold down the accelerator pedal
beyond the resistance point at the full
throttle position, kickdown.
A flag symbol is displayed in the instruj
ment cluster.5.The starting engine speed adjusts. Within
3 seconds, release the brake.
Repeated
use
during
a
trip
After Launch Control was used, the transmisj
sion must cool down for approx. 5 minutes, bej fore Launch Control can be used again.
Launch Control adjusts to the surroundingconditions, when used again.
After
using
Launch
Control
To increase vehicle stability, activate DSC Dyj
namic Stability Control again.
System
limits
An experienced driver may be able to achieve better acceleration values in DSC OFF mode.
Seite 80ControlsDriving80
Online Edition for Part no. 01402977734 - II/17