BMW 2 SERIES COUPE 2018 Workshop Manual

UnlockingPress button on the remote control.
Depending on the settings, refer to page 60,
the following access points are unlocked.'yDriver's door and fuel filler flap.
Press the button of the remote control
again to unlock the other vehicle access
points.'yAll doors, tailgate, and fuel filler flap.
In addition, the following functions are exej
cuted:
'yThe settings stored in the driver profile, rej
fer to page 58, are applied.'yThe driver's seat is set to the last position
saved in the driver's profile. This function
must be activated in the settings, refer to page 60.'yThe interior lights are switched on, unless
they were manually switched off. Switch
the interior lights on/off manually, refer to
page 117.'yThe exterior lighting activated in the setj
tings, refer to page 60, is switched on.'yAutomatically folded in exterior mirrors are
folded open. This function must be actijvated in the settings.'yThe alarm system, refer to page 61, is
switched off.
The light functions may depend on the ambij
ent brightness.
Convenient
opening Press and hold this button on the rejmote control after unlocking.
The windows and the glass sunroof are
opened, as long as the button on the remote
control is pressed.
Locking
1.Close the driver's door.2. Press button on the remote control.
The following functions are executed:
'yAll doors, the tailgate, and the fuel filler flap
are being locked.'yThe alarm system, refer to page 61, is
switched on.
If the engine or ignition is still switched on when you lock the vehicle, the vehicle horn
honks twice. In this case, the engine or ignition
must be switched off by means of the Start/ Stop button.
Switching
on
interior
lights
and
courtesy
light
Press button on the remote control with
the vehicle locked.
This function is not available, if the interior
lights were switched off manually.
The light functions may depend on the ambij
ent brightness.
After locking, wait 10 seconds before pressing the button again.
Tailgate
General
information
To avoid locking it in the vehicle, do not place
the remote control in the cargo area.
Depending on your vehicle's equipment and
the country version, it is possible to specify
whether the doors are also unlocked when unj
locking with the remote control. Adjusting the
settings, refer to page 60.
The tailgate can only be opened if it is not
locked. Separately lock the tailgate, refer to
page 57.
Seite 51Opening
and
closingControls51
Online Edition for Part no. 01402981270 - VI/17

Safety
informationWARNING
Body parts can be jammed when operatj
ing the tailgate. There is a risk of injury. Make
sure that the area of movement of the tailgate is clear during opening and closing.'

Malfunction
General
information
A Check Control message is displayed.
Remote control detection by the vehicle may
malfunction under the following circumstanj
ces:'yThe battery of the remote control is disj charged. Replacing the battery, refer to
page 52.'yInterference of the radio connection from
transmission towers or other equipmentwith high transmitting power.'yShielding of the remote control due tometal objects.
Do not transport the remote control toj gether with metal objects.'yInterference of the radio connection from mobile phones or other electronic devices
in direct proximity to the remote control.
Do not transport the remote control tojgether with electronic devices.'yInterference of radio transmission by a
charging process of mobile devices, for inj stance charging of a mobile phone.'yThe remote control is in direct proximity ofthe wireless charging tray.
Place the remote control down at a differj
ent location.
In the case of interference, the vehicle can be
unlocked and locked from the outside with the
integrated key, refer to page 53.
Starting
the
engine
via
emergency
detection
of
the
remote
control1.Hold the remote control with its backagainst the marked area on the steering
column.2.Start the engine within 10 seconds.
If the remote control is not detected, slightly
change the position of the remote control and repeat the procedure.
Integrated
key General
information
The driver's door can be locked and unlocked without remote control using the integrated
key.
The integrated key can also be used for the glove compartment on the front passengerside.
Safety
information WARNING
Unlocking from the inside is only possij
ble with special knowledge.
Persons who spend a lengthy time in the vehij
cle while being exposed to extreme temperaj
tures are at risk of injury or death. Do not lock the vehicle from the outside when there are
people in it.'

NOTE
The door lock is permanently joined with
the door. The door handle can be moved. When pulling the door handle with the
integrated key inserted, paint or the integrated
key can be damaged. There is a risk of damage
to property. Remove the integrated key before
pulling the outside door handle.'

'yOn the door to be opened, pull the doorhandle twice: the first time unlocks thedoor, the second time opens it. The other
doors remain locked.
Comfort
Access
Concept
The vehicle can be accessed without activatj
ing the remote control.
All you need to do is to have the remote conj
trol with you, such as in your pants pocket.
The vehicle automatically detects the remote
control when it is in close proximity or in the
vehicle's interior.
General
information
Comfort Access supports the following funcj
tions:
'yUnlocking and locking the vehicle.'yConvenient closing.'yOpening tailgate.
Functional
requirements
'yTo lock the vehicle, the remote control must be located outside of the vehicle near
the doors.'yThe next unlocking and locking cycle is not possible until after approx. 2 seconds.
Unlocking
Grasp the door handle on the driver's or front
passenger door completely.
This corresponds with pressing the button
on the remote control.
Locking
Touch the surface on the door handle of thedriver's or front passenger door with your finj
ger for approx. 1 second without grasping the
door handle.
This corresponds with pressing the button

on the remote control.
Convenient
closing
Safety
information WARNING
With convenient closing, body parts can
be jammed. There is a risk of injury. Make sure
that the area of movement of the doors is clear
during convenient closing.'

This corresponds with pressing and holding
the button
on the remote control.
In addition to locking, the windows and the
glass sunroof close and the exterior mirrors fold in.
Open
tailgate
General
information
If you open the tailgate via Comfort Access,
locked doors will not be unlocked.
To avoid locking it in the vehicle, do not place
the remote control in the cargo area.
Safety
information WARNING
Body parts can be jammed when operatj
ing the tailgate. There is a risk of injury. Make
sure that the area of movement of the tailgate is clear during opening and closing.'

Safety
informationWARNING
Body parts can be jammed when operatj
ing the tailgate. There is a risk of injury. Make
sure that the area of movement of the tailgate is clear during opening and closing.'

Trunk
emergency
unlocking
Pull the handle inside the cargo area.
The tailgate unlocks.
Driver
profile Concept
In the driver profiles, individual settings for several drivers can be stored and called up
again when required.
General
information
There are three driver profiles with which perj sonal vehicle settings can be stored. Every rejmote control has one of these driver profiles
assigned.
If the vehicle is unlocked using a remote conj
trol, the assigned personal driver profile will be
activated. All settings stored in the driver proj
file are automatically applied.
If several drivers use their own remote control,
the vehicle will adjust the personal settings
during unlocking. These settings are also rej
stored, if the vehicle has been used in the
meantime by a person with a different remote control.
Changes to the settings are automatically
stored in the driver profile currently activated.
If another driver profile is selected via iDrive, the settings stored in it will be applied autoj
matically. The new driver profile is assigned to
the remote control currently used.
There is an additional guest profile available
that is not assigned to any remote control. It can be used to apply settings in the vehicle
without changing the personal driver profiles.
Functional
requirements
For the system to be able to identify the driver
profile associated to a particular driver, the dej tected remote control must be clearly alloj
cated to the driver.
This is the case when:'yThe driver is only carrying his or her own
remote control.'yThe driver unlocks the vehicle.'yThe driver gets into the vehicle through the
driver's door.
Settings
The settings for the following systems and
functions are stored in the active profile. The
scope of storable settings depends on country
and equipment.
'yUnlocking and locking.'yLights.'yClimate control.'yRadio.'yInstrument cluster.'yProgrammable memory buttons.'yVolumes, tone.'yControl Display.'yNavigation.'yPDC Park Distance Control.'yRearview camera.'yDriving Dynamics Control.'yDriver's seat position, exterior mirror posij tion, steering wheel position if applicable.
Both the positions saved via the seat memj
ory and the last position set are saved.'yIntelligent Safety.Seite 58ControlsOpening
and
closing58
Online Edition for Part no. 01402981270 - VI/17

Profile
management
Selecting
a
driver
profile
Regardless of the remote control in use, a difj
ferent driver profile may be activated. This alj lows you to call up personal vehicle settings,even if you did not unlock the vehicle with your
own remote control.
Using iDrive:1."My Vehicle"2."Driver profiles"3.Select driver profile.4."OK"'yAll settings stored in the called-up driver profile are automatically applied.'yThe called-up driver profile is assigned to
the remote control being used at the time.'yIf the driver profile is already assigned to a
different remote control, this driver profile will apply to both remote controls.
Using
a
guest
profile
The guest profile is for individual settings thatare stored in none of the three personal driver
profiles.
Using iDrive:
1."My Vehicle"2."Driver profiles"3."Drive off (guest)"4."OK"
The guest profile cannot be renamed. It is not assigned to the current remote control.
Renaming
a
driver
profile
A personal name can be assigned to the active
driver profile to avoid confusion between the
driver profiles.
Using iDrive:
1."My Vehicle"2."Driver profiles"3.Select driver profile.
The driver profile marked with this symj
bol can be renamed.
4."Change driver profile name"5.Enter profile name.6. Select the symbol.
Resetting
a
driver
profile
The settings of the driver profile currently in
use are reset to their factory settings.
Using iDrive:
1."My Vehicle"2."Driver profiles"3.Select driver profile.
The driver profile marked with this symj
bol can be reset.
4."Reset driver profile"5."OK"
Exporting
driver
profiles
Most settings of the active driver profile can be
exported.
Exporting is helpful when storing and retrieving personal settings, for instance before deliverj
ing the vehicle to a workshop. The stored driver profiles can be taken into another vehij
cle.
Using iDrive:
1."My Vehicle"2."Driver profiles"3.Select driver profile.
The driver profile marked with this symj
bol can be exported.
4."Export driver profile"5.Select a storage device for exporting the driver profile.'y"USB device"
Select USB storage device, as needed, refer to page 39.Seite 59Opening
and
closingControls59
Online Edition for Part no. 01402981270 - VI/17

'yOnline.
Importing
driver
profiles
The existing settings of the active driver profile are overwritten with the settings of the imjported driver profile.
Using iDrive:
1."My Vehicle"2."Driver profiles"3.Select the driver profile to be overwritten.
The driver profile marked with this symj
bol can be overwritten.
4."Import driver profile"5.Select a storage device for importing the driver profile.'yUSB storage device: "USB device"
Select USB storage device as needed.'yOnline.6.Select the driver profile to be imported.
Displaying
driver
profiles
during
start The driver profiles can be displayed during
each start to select the desired profile.
Via iDrive:
1."My Vehicle"2."Driver profiles"3."Show driver profiles at startup"
System
limits
A clear assignment between the remote conj
trol and driver may not be possible in the folj
lowing cases, for example.
'yThe passenger unlocks the vehicle with his or her own remote control, but anotherperson is driving.'yThe driver unlocks the vehicle via Comfort
Access and has multiple remote controls with him or her.'yThe driver changes, but the vehicle is notlocked and unlocked.'yMultiple remote controls are located outjside of the vehicle.
Settings
General
information
Depending on your vehicle's equipment and
the country version, various settings for openj ing and closing are possible.
These settings are stored for the driver profile,
refer to page 58, currently used.
Unlocking
Doors Using iDrive:
1."My Vehicle"2."Vehicle settings"3."Doors/Key"4. "Driver's door" or "All doors"5.Select desired setting:'y"Driver's door only"
Only the driver's door and the fuel filler
flap are unlocked. Pressing again unj locks the entire vehicle.'y"All doors"
The entire vehicle is unlocked.
Tailgate
Depending on optional features and country
version, this setting is not offered in some
cases.
Using iDrive:
1."My Vehicle"2."Vehicle settings"3."Doors/Key"4. "Tailgate" or "Tailgate and
door(s)"5.Select desired setting:Seite 60ControlsOpening
and
closing60
Online Edition for Part no. 01402981270 - VI/17