diagnostic menu BMW 3 SERIES 2005 E46 Bluetooth Hadsfree Kit Upgrade Installation Instruction Manual

EN/14
Retrofit kit No. 84 64 0 152 501
Installation Instructions No. 01 29 0 152 511 Issue date: 07.2002
8. Concluding work
0
This upgrade system does not require coding.

- Connect battery
- Conduct a brief test with DISPlus/MoDiC III/GT1.
- Synchronize the mobile phone and the universal charger/hands-free electronic control unit
- Activate the Bluetooth function of the mobile phone (see the mobile phone owner's manual)
- Press and hold the push-to-talk button for about 1 second whilst switching on terminal R
- Release the push-to-talk button. The radio display shows
"BT CONNECTION"
and the MID or on-board
monitor displays
"BLUETOOTH CONNECTION"
.
The checklamps on the MID or on-board monitor flash during the connection phase.

- Activate the "Locate Bluetooth Devices" menu on the mobile phone (see the mobile phone owner's
manual). This process may take a few minutes.
- Work through additional menus in accordance with the instructions displayed on the mobile phone
- When prompted to do so, enter the 4 digit
"BLUETOOTH PASSKEY"
(see the sticker on the owner's
manual) using the mobile phone keypad
- The radio, MID or on-board monitor displays
"SUCCESSFUL"
to confirm that synchronisation has been
carried out correctly
- Switch off the ignition – the connection is terminated
- Conduct a function test
- Assemble the car again following the instructions to dismantle it in reverse order
Refer the DIS (Diagnostic Information System) for the circuit diagram of the telephone preparation
(SA 640), if required.