BMW 3 SERIES GRAN TURISMO 2018 Owner's Guide

Adjusting
the
volumeTurn the volume button during the spoken injstructions until the desired volume is set.'yThe volume remains constant even if the
volume of other audio sources is changed.'yThe volume is stored for the drive profile
currently used.
Information
on
Emergency
Requests
Do not use the voice activation system to inij
tiate an Emergency Request. In stressful situaj tions, the voice and vocal pitch can change.This can unnecessarily delay the establishjment of a phone connection.
Instead, use the SOS button, refer to
page 259, close to the interior mirror.
Environmental
conditions
'yKeep the doors, windows, and glass sunj roof closed to prevent noise interference.'yAvoid making other noise in the vehiclewhile speaking.Seite 31Voice
activation
systemAt
a
glance31
Online Edition for Part no. 01402981529 - VI/17

General
settingsVehicle
features
and
optionsThis chapter describes all standard, country-specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Language
Setting
the
language
About iDrive:1."My Vehicle"2."iDrive settings"3."Language"4."Language:"5.Select desired setting.
The setting is stored for the drive profile curj rently used.
Setting
the
voice
dialog Voice dialog for the voice activation system,
refer to page 30.
Time Setting
the
time
zoneAbout iDrive:
1."My Vehicle"2."iDrive settings"3."Date and time"4."Time zone:"5.Select desired setting.The setting is stored for the drive profile curjrently used.
Setting
the
time About iDrive:1."My Vehicle"2."iDrive settings"3."Date and time"4."Time:"5.Turn the Controller until the desired hours
are displayed.6.Press the Controller.7.Turn the Controller until the desired mij nutes are displayed.8.Press the Controller.
The setting is stored for the drive profile curjrently used.
Setting
the
time
format
About iDrive:
1."My Vehicle"2."iDrive settings"3."Date and time"4."Time format:"5.Select desired setting.
The setting is stored for the drive profile curj rently used.
Automatic
time
setting Depending on your vehicle's optional features,
the time, date and, if needed, the time zone are updated automatically.
About iDrive:
1."My Vehicle"2."iDrive settings"Seite 32At
a
glanceGeneral
settings32
Online Edition for Part no. 01402981529 - VI/17

3."Date and time"4."Automatic time setting"
The setting is stored for the drive profile curjrently used.
Date Setting
the
date
Using iDrive:
1."My Vehicle"2."iDrive settings"3."Date and time"4."Date:"5.Turn the Controller until the desired day is
displayed.6.Press the Controller.7.Make the settings for the month and year.
The setting is stored for the driver profile curj
rently used.
Setting
the
date
format About iDrive:
1."My Vehicle"2."iDrive settings"3."Date and time"4."Date format:"5.Select desired setting.
The setting is stored for the drive profile curjrently used.
Setting
the
units
of
measurement
You can set the units of measurement for
some values, for example, fuel consumption, distances and temperature.
Via iDrive:1."My Vehicle"2."iDrive settings"3."Units"4.Select the desired menu item.5.Select the desired setting.
The setting is stored for the driver profile curj
rently used.
Activating/deactivating
the
display
of
the
current
vehicle
position
Concept
If vehicle location has been activated, the curj
rent vehicle position can be displayed in the BMW Connected app or in the Connectedj
Drive customer portal.
Activating/deactivating
Using iDrive:
1."My Vehicle"2."Vehicle settings"3."Vehicle tracking"4."Vehicle tracking"
Activating/deactivating
popup
windows
For some functions, popup windows are disjplayed automatically on the Control Display.Some of these popup windows can be actijvated or deactivated.
1."My Vehicle"2."iDrive settings"3."Pop-ups"4.Select the desired setting.Seite 33General
settingsAt
a
glance33
Online Edition for Part no. 01402981529 - VI/17

The setting is stored for the driver profile curj
rently used.
Control
Display Brightness
Via iDrive:1."My Vehicle"2."iDrive settings"3."Displays"4."Control display"5."Brightness"6.Turn the controller until the desired brightj ness is set.7.Press the controller.
The setting is stored for the driver profile curj
rently used.
Depending on the light conditions, the brightj
ness settings may not be clearly visible.
Screen
saver
If no settings are made via iDriver, after a time
that can be set, a screen saver is displayed.
About iDrive:
1."My Vehicle"2."iDrive settings"3."Displays"4."Control display"5."Screensaver"6.Select desired setting.
The setting is stored for the drive profile curjrently used.
Selecting
the
contents
of
the
main menu
For some menu items of the main menu, thedisplayed contents can be selected.
1. Press button.2."Contents of main menu"3.Select the desired menu and the desired
content.
The setting is stored for the driver profile curj
rently used.
Messages Concept
The menu centrally displays all messages arj riving in the vehicle in list form.
General
information
The following messages can be displayed:
'yTraffic messages.'yCheck Control messages.'yCommunication messages, for example e- mails, SMS text messages or reminders.'yService requirements messages.
Messages are additionally displayed in the stajtus field.
Retrieving
messages Using iDrive:
1."Notifications"2.Select the desired message.
The respective menu is opened, where themessage is displayed.
Deleting
messages All messages, except Check Control mesj
sages, can be deleted from the list. Check Control messages are displayed as long as
they are relevant.
About iDrive:
1."Notifications"2.Select the desired message.Seite 34At
a
glanceGeneral
settings34
Online Edition for Part no. 01402981529 - VI/17

3. Press button.4."Delete this notification" or "Delete allnotifications"
Settings
The following settings can be adjusted:
'ySelect the applications, from which mesj
sages will be permitted.'ySort the messages according to date or
priority.
Via iDrive:
1."My Vehicle"2."iDrive settings"3."Notifications"4.Select the desired setting.
Data
protection
Data
transfer
Concept
The vehicle offers different functions, whose use requires a data transfer to BMW or a servjice provider. The data transfer can be deactijvated for some functions.
General
information With data transfer deactivated, the respective
function cannot be used.
Only make these settings while stationary.
Activating/deactivating
the
data
transfer
Follow the instructions on the Control Display.
Using iDrive:
1.Switch on the ignition.2."My Vehicle"3."iDrive settings"4."Data privacy"5.Select the desired setting.
Deleting
personal
in
the
vehicle
The
concept Depending on the usage, the vehicle saves
personal data, such as stored radio stations. These personal data can be permanently dejleted through iDrive.
General
information Depending on the equipment package, the foljlowing data can be deleted:
'yDriver profile settings.'yStored radio stations.'yStored programmable memory buttons.'yTravel and Onboard Computer information.'yMusic collection.'yNavigation, for instance stored destinaj
tions.'yPhone book.'yOnline data, for instance Favorites, cookj
ies.'yOffice data, for instance voice notes.'yLogin accounts.
Altogether, the deletion of the data can take up
to 15 minutes.
Functional
requirement Data can only be deleted while stationary.
Deleting
data Heed and follow the instructions on the Conj
trol Display.
Using iDrive:
1.Switch on the ignition.2."My Vehicle"3."iDrive settings"4."Data privacy"Seite 35General
settingsAt
a
glance35
Online Edition for Part no. 01402981529 - VI/17

5."Delete personal data"6."Delete personal data"7."OK"8.Exit and lock the vehicle.
After 15 minutes, the deletion process is comj
pleted.
If not all of the data was deleted, repeat the dej letion.
Canceling
deletionStart the engine to cancel deletion of the data.
Connections
Concept
Various connection types are available for usj
ing mobile devices in the vehicle. The connecj tion type to select depends on the mobile dej
vice and the desired function.
General
information The following overview shows possible funcj
tions and the suitable connection types for them. The scope of functions depends on themobile device.
FunctionConnecj
tion typeMaking calls via the hands-free
system.
Using phone functions via iDrive.
Using the smartphone Office
functions.Bluetooth.Playing music from the smartj
phone or the audio player.Bluetooth
or USB.Using compatible apps via iDrive.Bluetooth
or USB.FunctionConnecj
tion typeUSB storage device:
Exporting and importing driver
profiles.
Performing software updates.
Exporting and importing stored
trips.
Playing music.USB.Playing videos from the smartj
phone or the USB storage dej
vice.USB.Using the vehicle Internet acj
cess.Internet
hotspot.Use Apple Carplay apps via
iDrive and voice operation.Bluetooth
and WiFi.Screen Mirroring:
Showing the smartphone display
on the Control Display.WiFi.
The following connection types require one- time pairing with the vehicle:
'yBluetooth.'yInternet hotspot.'yApple CarPlay.'yScreen Mirroring.
Paired devices are automatically recognized
later on and connected to the vehicle.
Safety
information WARNING
Operating the integrated information
systems and communication devices while driving can distract from traffic. It is possible tolose control of the vehicle. There is a risk of anaccident. Only use the systems or devices
when the traffic situation allows. If necessary,
stop and use the systems and devices while the vehicle is stationary.'

Compatible
devices
General
information
Information on mobile devices compatible with the vehicle can be found at www.bmwusa.com/
bluetooth.
Malfunctions may occur with devices not listed or deviating software versions.
Displaying
the
vehicle
identification
number
and
software
part
number
When looking for compatible devices, you may have to state the vehicle identification number
and the software part number. These numbers can be displayed in the vehicle.
Using iDrive:1."My Vehicle"2."iDrive settings"3."Mobile devices"4."Settings"5."Bluetoothn info"6."System information"
A software update, refer to page 43, can be
performed, if needed.
Bluetooth
connection
Functional
requirements
'yCompatible device, refer to page 37, with
Bluetooth interface.'yThe remote control is in the vehicle.'yThe device is ready for operation.'yBluetooth is activated on the device and in the vehicle, refer to page 37.'yBluetooth pre-settings may be required on
the device, for instance visibility, refer to
the owner's manual of the device.Switching
on
Bluetooth
Using iDrive:1."My Vehicle"2."iDrive settings"3."Mobile devices"4."Settings"5."Bluetoothn"
Activating/deactivating
telephone
functions
To use all supported functions of a mobile
phone, the following functions must be actij
vated prior to pairing.
Using iDrive:
1."My Vehicle"2."iDrive settings"3."Mobile devices"4."Settings"5.Select desired setting:'y"Office"
Activate function to transmit short messages, e-mails, calendars, tasks,
notes, and reminders to the vehicle.
Costs can be incurred by transmitting
all data to the vehicle.'y"Contact images"
Activate function to show the contact pictures.6.Move the Controller to the left.
Pairing
the
mobile
device
with
the
vehicle
Using iDrive:
1."My Vehicle"2."iDrive settings"3."Mobile devices"4."Connect new device"5.Select the functions for which the device
will be used:Seite 37General
settingsAt
a
glance37
Online Edition for Part no. 01402981529 - VI/17

'y "Telephone"'y "Bluetoothn audio"'y "Apps"'y "Apple CarPlay"
The Bluetooth name of the vehicle is disj
played on the Control Display.
6.Search for Bluetooth devices in the vicinity
of the mobile device.
The Bluetooth name of the vehicle appears
on the mobile device display.
Select the Bluetooth name of the vehicle.7.Depending on the mobile device, a control
number is displayed or the control number
must be entered.'yCompare the control number displayed
on the Control Display with the control number on the display of the device.
Confirm the control number on the dej vice and on the Control Display.'yEnter and confirm the same controlnumber on the device and via iDrive.
The device is connected and displayed in
the device list, refer to page 41.
If connection was not successful: Frequently
Asked Questions, refer to page 38.
Frequently
asked
questions All requirements are met and all required steps
were completed in the specified order. Despite that, the mobile device does not function as
expected.
In this case, the following explanations can help:
Why could the mobile phone not be paired or
connected
'yThere are too many Bluetooth devices connected to the mobile phone or vehicle.
In the vehicle, delete Bluetooth connecj
tions with other devices.Delete all known Bluetooth connections
from the device list on the mobile phone
and start a new device search.'yThe mobile phone is in power-save mode
or has only a limited remaining battery life.
Charge mobile phone.'yDepending on the mobile phone, it is posj sible that only one mobile phone can beconnected to the vehicle.
Unpair the connected mobile phone from
the vehicle and pair and connect only one
mobile phone.
Why does the mobile phone no longer react
'yThe applications on the mobile phone do
not function anymore.
Switch the mobile phone off and on again.'yToo high or too low ambient temperatures for mobile phone operation.
Do not subject the mobile phone to exj
treme ambient temperatures.
Why can phone functions not be used via iDrive
'yThe mobile phone may not be properlyconfigured, for instance as Bluetooth audiodevice.
Connect the mobile phone with the telej
phone or additional phone function.
Why are no or not all phone book entries disj
played or why are they incomplete
'yTransmission of the phone book entries is
not yet complete.'yIt is possible that only the phone book enj
tries of the mobile phone or the SIM card are transmitted.'yIt may not be possible to display phonebook entries with special characters.'yIt may not be possible to transmit contacts
from social networks.'yThe number of phone book entries to be
stored is too high.Seite 38At
a
glanceGeneral
settings38
Online Edition for Part no. 01402981529 - VI/17

'yData volume of the contact too large, for
instance due to stored information such as notes.
Reduce the data volume of the contact.'yA mobile phone can only be connected as
audio source or as telephone.
Configure the mobile phone and connect it
with the telephone or additional phone
function.
How can the phone connection quality be imj proved
'yThe strength of the Bluetooth signal on the
mobile phone can be adjusted, depending on the mobile phone.'yInsert the mobile phone into the snap-inadapter or place it in the area of the center
console.'yInsert mobile phone into the wireless
charging tray.'yAdjust the volume of the microphone and
loudspeakers separately.
If all points in this list have been checked and the required function is still not available, conjtact the hotline, a dealerss service center or anj
other qualified service center or repair shop.
USB
connection
General
information Mobile devices with a USB port are connectedto the USB interface.
'yMobile phones.
The snap-in adapter features a separate USB port that is automatically connected
when a compatible mobile phone is inj
serted.'yAudio devices with USB port, for instance MP3 player.'yUSB storage devices.
Common file systems are supported. FAT32 and exFAT are the recommendedformats.The following applications are possible:'yExporting and importing driver profiles, rejfer to page 60.'yPlaying music files via USB audio.'yPlaying videos via USB video.'yLoading of software updates, refer to
page 43.
Follow the following when connecting:
'yDo not use force when plugging the conj
nector into the USB interface.'yUse a flexible adapter cable.'yProtect the USB storage device againstmechanical damage.'yDue to the large number of USB mediaavailable on the market, it cannot be guarj
anteed that every device is operable on the
vehicle.'yDo not expose USB media to extreme envij
ronmental conditions, such as very high
temperatures; refer to the owner's manual of the device.'yDue to the many different compressiontechniques, proper playback of the media
stored on the USB storage device cannot
be guaranteed in all cases.'yA connected USB storage device will be
supplied with charging current via the USB interface if the device supports this.'yTo ensure proper transmission of thestored data, do not charge a USB storage
device via the onboard socket, when it is
connected to the USB interface.'yDepending on how the USB storage device is being used, settings may be required on
the USB storage device, refer to the ownj er's manual of the device.
Not compatible USB media:
'yUSB hard drives.'yUSB hubs.'yUSB memory card readers with multiple inj
serts.Seite 39General
settingsAt
a
glance39
Online Edition for Part no. 01402981529 - VI/17

'yHFS-formatted USB media.'yDevices such as fans or lamps.
Functional
requirementCompatible device, refer to page 37, with USB
interface.
Connecting
the
device
Connect the USB storage device using a suitaj ble adapter cable to a USB interface, refer topage 195.
The USB storage device is displayed in the dej vice list, refer to page 41.
Internet
connection
General
information Up to 8 devices can be connected with the Inj
ternet hotspot.
Functional
requirements
'yCompatible device, refer to page 37, with
WiFi interface.'yConnectedDrive contract.'yData contract with a service provider.'yWiFi activated on the device.'yInternet hotspot activated in the vehicle.'yThe ignition is switched on.
Activating
the
Internet
hotspot
Using iDrive:
1."My Vehicle"2."iDrive settings"3."Mobile devices"4."Settings"5."Internet hotspot"Connecting
device
with
Internet
hotspot
Using iDrive:1."My Vehicle"2."iDrive settings"3."Mobile devices"4."Connect new device"5. "Internet hotspot"
Hotspot name and hotspot code are disj played on the Control Display.6.Search for WiFi networks on the device.
Select network name on the device.7.Enter hotspot code on the device and conj nect.
With the first Internet usage via the Internet
hotspot, data volume must be purchased from
a service provider.
All devices connected via the Internet hotspot
use this data volume.
If necessary, data volume can be purchased from the ConnectedDrive Store.
Settings The network name and hotspot code can be
changed. In addition, the network name can be hidden so that it cannot be found by other dejvices.
Via iDrive:
1."My Vehicle"2."iDrive settings"3."Mobile devices"4. Press button.5.'y"Change hotspot key"
Enter the desired hotspot code.'y"Change hotspot name"
Enter the desired network name.'y"Hide hotspot"Seite 40At
a
glanceGeneral
settings40
Online Edition for Part no. 01402981529 - VI/17