BMW 4 SERIES COUPE 2017 Service Manual

foot, make sure you have a firm stance and donot touch the vehicle.'

Safety
informationWARNING
Body parts can be jammed when operatj
ing the tailgate. There is a risk of injury. Make
sure that the area of movement of the tailgate is clear during opening and closing.'

'yBy pressing the button on the remote conj
trol.'yBy pressing the button in the driver's foot
area.
Closing
From
the
outside
Press the button on tailgate's exterior.
From
inside
the
tailgate
Without Comfort Access:
Press button on the inside of the tailgate.
With Comfort Access:
'yPress button, arrow 1, on the inside of the
tailgate.'yPress button, arrow 2.
The vehicle will be locked after closing the
tailgate. The driver's door must be closed
for this purpose and the remote control
must be outside of the vehicle in the area
of the tailgate.Canceling
the
closing
operation
The closing procedure is interrupted in the folj
lowing situations:'yIf the vehicle starts off with a jerky movej
ment.'yBy pressing the button on the outside of
the tailgate.'yBy pressing the button on the inside of the tailgate.
Locking
separately
The tailgate can be locked separately using the
switch in the glove compartment. If the glove compartment is locked, the tailgate cannot beopened.
'yThe tailgate is locked, arj
row 1.'yThe tailgate is unlocked, arj
row 2.
Slide the switch into the arrow 1 position. The tailgate is secured and disconnected from the
central locking system.
This is beneficial when the vehicle is parked using valet service. The remote control can behanded out without the integrated key.
Trunk
emergency
unlocking
Pull the handle inside the cargo area.
The tailgate is unlocked.
Seite 43Opening
and
closingControls43
Online Edition for Part no. 01 40 2 974 422 - X/16

Malfunction
Safety
information WARNING
With manual operation of a blocked tailj
gate, it can release itself unexpectedly from
the blockage. There is a risk of injury or risk of property damage. Do not operate the tailgatemanually if it is blocked. Have it checked by a
dealerss service center or another qualified
service center or repair shop.'

'yDriving Dynamics Control.'yDriver's seat position, exterior mirror posijtion, steering wheel position.'yIntelligent Safety.'yActive Blind Spot Detection.
Profile
management
Opening
profiles Regardless of the remote control in use, a difjferent profile may be activated. This allows youto call up personal vehicle settings if you did
not unlock the vehicle with your own remote control.
Using iDrive:
1."Settings"2."Profiles"3.Select a profile.'yAll settings stored in the called-up profile are automatically applied.'yThe called-up profile is assigned to the rejmote control being used at the time.'yIf the profile is already assigned to a differjent remote control, this profile will apply toboth remote controls.
Using
a
guest
profile
The guest profile is for individual settings thatare stored in none of the three personal proj
files.
This can be useful for drivers who are using
the vehicle temporarily and do not have their
own profile.
Using iDrive:
1."Settings"2."Profiles"3."Guest"
The guest profile cannot be renamed. It is not assigned to the current remote control.
Renaming
profiles
A personal name can be assigned to every projfile to avoid confusion between the profiles.
Using iDrive:1."Settings"2."Profiles"
The active profile is selected.3.Open "Options".4."Rename current profile"
Reset
profiles
The settings of the active profile are reset to
their factory settings.
Using iDrive:
1."Settings"2."Profiles"3.Open "Options".4."Reset current profile"
Exporting
profiles Most settings of the active profile can be exjported.
This can be helpful for saving and retrieving
personal settings, for instance before deliverj
ing the vehicle to a workshop. Profiles can be
taken to another vehicle equipped with the
Personal Profile function.
Using iDrive:
1."Settings"2."Profiles"3."Export profile"4.BMW Online: "BMW Online"
USB interface: "USB device"
Popular file systems for USB media are supj
ported. FAT32 and exFAT are the recomj
mended formats for profile export. Other forj
mats may not support the export.
Seite 45Opening
and
closingControls45
Online Edition for Part no. 01 40 2 974 422 - X/16

Importing
profiles
Profiles exported via BMW Online can also be imported via BMW Online.
Profiles stored on a USB storage device can be
imported via the USB interface.
Existing settings are overwritten with the imj
ported profile.
Using iDrive:1."Settings"2."Profiles"3."Import profile"4.BMW Online: "BMW Online"
USB interface: "USB device"
Display
profile
list
during
start
The profile list can be displayed during each
start to select the desired profile.
Using iDrive:
1."Settings"2."Profiles"3.Open "Options".4."Display user list at startup"
System
limits
A clear assignment between the remote conj
trol and driver may not be possible in the folj
lowing cases, for example.
'yThe passenger unlocks the vehicle with his or her own remote control, but anotherperson is driving.'yThe driver unlocks the vehicle via Comfort
Access and has multiple remote controls with him or her.'yThe driver changes, but the vehicle is notlocked and unlocked.'yMultiple remote controls are located outjside of the vehicle.Settings
General
information
Depending on the equipment and country-
specific variant of your vehicle, different openj ing and closing settings are available.
These settings are saved in the active driver profile, refer to page 44.
Unlocking
Doors Using iDrive:1."Settings"2."Doors/key"3. Select the symbol.4.Select the desired function:'y"Driver's door only"
Only the driver's door and the fuel filler
flap are unlocked. Pressing again unj locks the entire vehicle.'y"All doors"
The entire vehicle is unlocked.
Tailgate
Using iDrive:
1."Settings"2."Doors/key"3. Select the symbol.4.Select the desired function:'y"Tailgate"
Depending on your vehicle's optional
features, the tailgate is either unlocked
or opened.'y"Tailgate + door(s)"
Depending on your vehicle's optional
features, the tailgate is either unlocked
or opened and the doors unlocked.Seite 46ControlsOpening
and
closing46
Online Edition for Part no. 01 40 2 974 422 - X/16

Confirmation
signals
from
the
vehicle
Using iDrive:1."Settings"2."Doors/key"3.Deactivate or activate the desired confirj mation signals.'yWith alarm system:
"Acoustic sig. lock/unlock"
Unlocking is signaled by one honk of the horn.'y"Flash when lock/unlock"
Unlocking is signaled by two flashes,
locking by one.
Automatic
locking
Using iDrive:
1."Settings"2."Doors/key"3.Select the desired function:'y"Lock if no door is opened"
The vehicle locks automatically after a
short period of time if no door is
opened after unlocking.'y"Lock after start driving"
The vehicle locks automatically after you drive off.
Adjusting
the
last
seat
and
mirror
position
Using iDrive:
1."Settings"2."Doors/key"3."Last seat position autom."
When the vehicle is unlocked, the driver's seat
and exterior mirrors resume their last set posij tions.
Alarm
system
General
information
When the vehicle is locked, the vehicle alarm
system reacts to the following changes:'yUnauthorized opening of a door, the hood
or the tailgate.'yMovements in the interior.'yChanges in the vehicle tilt, e. g., during atj tempts at stealing a wheel or when towing
the vehicle.'yDisconnected battery voltage.
The alarm system signals these changes visuj
ally and acoustically:
'yAcoustic alarm.'yBy switching on the hazard warning sysj tem.'yBy flashing the daytime running lights.
Switching
on
and
off
When you lock and unlock the vehicle with the
remote control or with Comfort Access, the alarm system is switched on and off at thesame time.
Opening
the
doors
with
the
alarmsystem
switched
on
The alarm system is triggered when a door is
opened if the door was unlocked using the inj
tegrated key in the door lock.
Switching off the alarm, refer to page 48.
Opening
the
tailgate
with
the
alarm
system
switched
on
The tailgate can be opened even when the
alarm system is switched on.
After the tailgate is closed, it is locked and
monitored again provided the doors are locked. The hazard warning system flashes
once.
Seite 47Opening
and
closingControls47
Online Edition for Part no. 01 40 2 974 422 - X/16

Panic
mode
You can trigger the alarm system if you find
yourself in a dangerous situation.
Press button on the remote control for
at least 3 seconds.
To switch off the alarm: press any button.
Indicator
light
on
the
interior
mirror'yThe indicator light flashes briefly every2 seconds:
The alarm system is switched on.'yIndicator light flashes for approx. 10 secj onds, then it flashes briefly every 2 secj
onds:
Interior motion sensor and tilt alarm sensor
are not active, as doors, hood, or tailgate are not correctly closed. Correctly closedaccess points are secured.
When the still open access points are
closed, interior motion sensor and tilt alarm
sensor will be switched on.'yThe indicator light goes out after unlockj
ing:
The vehicle has not been tampered with.'yThe indicator light flashes after unlocking until the engine ignition is switched on, butno longer than approx. 5 minutes:
An alarm has been triggered.
Tilt
alarm
sensor The tilt of the vehicle is monitored.
The alarm system responds in situations such
as attempts to steal a wheel or when the vehij
cle is towed.
Interior
motion
sensor
The windows and the glass sunroof must be
closed for the system to function properly.
Avoiding
unintentional
alarms
General
information
The tilt alarm sensor and interior motion senj
sor can trigger an alarm, although no unauthorj
ized action occurred.
Possible situations for an unwanted alarm:'yIn automatic vehicle washes.'yIn duplex garages.'yDuring transport on trains carrying vehij
cles, at sea or on a trailer.'yWith animals in the vehicle.
The tilt alarm sensor and the interior motion sensor can be switched off in such situations.
Switching
off
the
tilt
alarm
sensor
and
interior
motion
sensor
Press the remote control button againwithin 10 seconds as soon as the vehicle
is locked.
The indicator lamp lights up for approx. 2 secj
onds and then continues to flash.
The tilt alarm sensor and interior motion senj
sor are turned off until the vehicle is locked
again.
Switching
off
the
alarm
'yUnlock the vehicle with the remote control or switch on the ignition, if needed through
emergency detection of remote control, rej fer to page 36.'yWith Comfort Access:
If you are carrying the remote control on
your person, grasp the door handle on theSeite 48ControlsOpening
and
closing48
Online Edition for Part no. 01 40 2 974 422 - X/16

driver's or front passenger door comj
pletely.
Power
windows
Safety
information WARNING
When operating the windows, body parts
and objects can be jammed. There is a risk of injury or risk of property damage. Make surethat the area of movement of the windows isclear during opening and closing.'

Safety
informationWARNING
Accessories on the windows such as anj
tennas can impact jam protection. There is a risk of injury. Do not install accessories in thearea of movement of the windows.'