BMW 4 SERIES COUPE 2019 Owners Manual

Parking
using
pathway
and
turning
radius
lines1.Position the vehicle so that the turning radius lines lead to within the limits of the parking
space.2.Turn the steering wheel to the point where the pathway line covers the corresponding
turning radius line.
Display
settings
BrightnessWith the rearview camera switched on:
1.Move the Controller to the left, if needed.2. Select the symbol.3.Turn the Controller until the desired setting isreached, and press the Controller.
Contrast
With the rearview camera switched on:
1.Move the Controller to the left, if needed.2. Select the symbol.3.Turn the Controller until the desired setting is reached, and press the Controller.
System
limits
Detection
of
objects Very low obstacles as well as high, protruding
objects such as ledges may not be detected by the system.
Depending on the vehicle equipment, some asj
sistance functions also consider data from the PDC Park Distance Control.
Follow the notes in the PDC Park Distance Conj
trol chapter.
The objects displayed on the Control Display may be closer than they appear. Do not estimate
the distance from the objects on the display.
Side
View
Concept
Side View provides an early look at cross traffic
at blind driveways and intersections. Road users
concealed by obstacles to the left and right of the vehicle can only be detected relatively late
from the driver's seat. To improve visibility, two
cameras in the front of the vehicle record the
traffic situation on each side. The images from
both cameras are shown simultaneously on the
Control Display.
Safety
information
WARNING
The system cannot serve as a substitute for the driverss personal judgment in assessing the
traffic situation. There is a risk of an accident.
Adjust driving style to traffic conditions. Watch
traffic and vehicle surroundings closely and acj tively intervene where appropriate.
Seite 191Driving
comfortCONTROLS191
Online Edition for Part no. 01402989120 - II/18

OverviewButton
in
the
vehicle
Side View
Cameras
Two cameras integrated in the bumpers capture
the image.
The two camera lenses are located on the sides
of the bumper.
The image quality may be impaired by dirt. If rej
quired, clean the camera lenses.
Switching
on/off
Switching
on/off
manually Press button.
Automatic
deactivation
during
forward
travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
Display The traffic area to the left and right is displayed
on the Control Display.
Guidelines at the bottom of the image show the
position of the front of the vehicle.
Brightness With the Side View switched on:
1.Move the Controller to the left, if needed.2. "Brightness"3.Turn the Controller until the desired setting isreached, and press the Controller.
Contrast
With the Side View switched on:
1.Move the Controller to the left, if needed.2. "Contrast"3.Turn the Controller until the desired setting is reached, and press the Controller.
System
limits
The cameras capture a maximum range of330 ft/100 m.
Top
View
Concept
Top View provides assistance in parking and maj
neuvering. The area around the doors and the
Seite 192CONTROLSDriving
comfort192
Online Edition for Part no. 01402989120 - II/18

road area around the vehicle are shown on theControl Display for this purpose.
General
information The image is captured by two cameras
integrated in the exterior mirrors and by the rearj
view camera.
The range is at least 7 ft/2 m to the side and rear.
In this way, obstacles up to the height of the exj
terior mirrors are detected early.
Safety
information
WARNING
The system cannot serve as a substitute for the
driverss personal judgment in assessing the
traffic situation. There is a risk of an accident.
Adjust driving style to traffic conditions. Watch
traffic and vehicle surroundings closely and acj tively intervene where appropriate.
Overview
Button
in
the
vehicle
Park assistance button
Cameras
Cameras at the bottom in the mirror housings.
Rearview camera
The image quality may be impaired by dirt. If rej
quired, clean the camera lenses.
Switching
on/off
Switching
on
automatically The system is switched on automatically if selecj
tor lever position R is engaged when the engine is running.
The rearview camera image is displayed. To switch to the Top View:
1.Move the Controller to the left, if needed.2. "Rear view camera"
Automatic
deactivation
during
forward
travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
Seite 193Driving
comfortCONTROLS193
Online Edition for Part no. 01402989120 - II/18

Switching
on/off
manuallyPress park assistance button.'xOn: the LED lights up.'xOff: the LED goes out.
Top View is displayed.
The rearview camera image is displayed if the rej
verse gear is engaged when pressing the park assistance button.
Display Visual
warning
The approach of the vehicle to an object can be
shown on the Control Display.
When the distance to an object is small, a red bar
is shown in front of the vehicle, as it is in the PDC display.
The display appears as soon as Top View is actij
vated.
When the image of the rearview camera is disj
played, it is possible to switch to top view:
1.Move the Controller to the left, if needed.2. "Rear view camera"
Brightness
With Top View switched on:
1.Move the Controller to the left, if needed.2. Select the symbol.3.Turn the Controller until the desired setting isreached, and press the Controller.Contrast
With Top View switched on:1.Move the Controller to the left, if needed.2. Select the symbol.3.Turn the Controller until the desired setting is reached, and press the Controller.
Displaying
the
turning
radius
and
pathway
lines
'xThe static, red turning radius line shows the space needed to the side of the vehicle when
the steering wheel is turned all the way.'xThe variable, green pathway line assists you
in assessing the amount of space actually needed to the side of the vehicle.
The lane line depends on the engaged gear
and the current steering angle. The track line
is continuously adjusted for the steering wheel movement.1.Move the Controller to the left, if needed.2. "Parking aid lines"
Turning circle and pathway lines are displayed.
System
limits Top View cannot be used in the following situaj
tions:
'xWith a door open.'xWith the tailgate open.'xWith an exterior mirror folded in.'xIn poor light.
A Check Control message is displayed in some
of these situations.
Seite 194CONTROLSDriving
comfort194
Online Edition for Part no. 01402989120 - II/18

Parking
assistant
Concept
The system supports parking in the following sitjuations:
'xWhen parking parallel to the road, parallel
parking.'xWhen reverse parking diagonally to the road, diagonal parking. The system orients itselfwith the middle of the parking space duringdiagonal parking.
General
information
Parking assistant handling is divided into three
steps:
'xSwitching on and activating.'xParking space search.'xParking.
Ultrasound sensors measure parking spaces on
both sides of the vehicle.
The parking assistant calculates the best possij
ble parking line and takes control of steering durj ing the parking procedure.
System status and instructions on required acj
tions are displayed on the Control Display.
The parking assistant uses the sensors of PDC
Park Distance Control.
Safety
information
WARNING
The system cannot serve as a substitute for the
driverss personal judgment in assessing the
traffic situation. Based on the limits of the sysj tem, it cannot independently react to all trafficsituations. There is a risk of an accident. Adjust
driving style to traffic conditions. Watch traffic
closely and actively intervene where approprij
ate.
NOTICE
The parking assistant can steer the vehicle over
or onto curbs. There is a risk of damage to property. Watch traffic closely and actively inj
tervene where appropriate.
Also follow the safety information for PDC Park
Distance Control.
Overview Button
in
the
vehicle
Park assistance button
Seite 195Driving
comfortCONTROLS195
Online Edition for Part no. 01402989120 - II/18

Ultrasound
sensors
The four ultrasound sensors for measuring parkj
ing spaces are located in the front and rear on the side of the vehicle.
Functional
requirements
Ultrasound
sensors Ensure full functionality:
'xDo not cover sensors, for instance with stickj
ers.'xKeep the sensors clean and unobstructed.
For
measuring
parking
spaces
'xMaximum speed while driving forward approx.
22 mph/35 km/h.'xMaximum distance to row of parked vehicles:
5 ft/1.5 m.
Suitable
parking
space
General information:
'xGap behind an object that has a min. lengthof 1.7 ft/0.5 m.'xGap between two objects with a minimum
length of approx. 1.7 ft/0.5 m.
Parallel parking to the road:
'xMin. length of gap between two objects: your
vehicle's length plus approx. 2.6 ft/0.8 m.'xMinimum depth: approx. 5 ft/1.5 m.
Diagonal parking:
'xMinimum width of the gap: own vehicle's
width plus approx. 2.6 ft/0.8 m.'xMinimum depth: your vehicle's length.
The depth of diagonal parking spaces must
be estimated by the driver. Due to technical limitations, the system is only able to approxij
mate the depth of diagonal parking spaces.
For
parking
'xDoors and tailgate are closed.'xThe parking brake is released.'xWhen parking in parking spaces on the drivj er's side, the corresponding turn signal may
have to be switched on.
Switching
on
and
activating
Switching
on
with
the
button Press park assistance button.
The LED lights up.
The current status of the parking space search is
indicated on the Control Display.
Parking assistant is activated automatically.
Switching
on
with
reverse
gear Shift into reverse.
The current status of the parking space search is
indicated on the Control Display.
To activate:
"Parking Assistant"
Display
on
the
Control
Display System
activated/deactivated
Symj
bolMeaning Gray: the system is not available.
White: the system is available but not
activated. The system is activated.Seite 196CONTROLSDriving
comfort196
Online Edition for Part no. 01402989120 - II/18

Parking
space
search
and
system
status'xSymbol P on the vehicle image: the parking
assistant is activated and the parking space search is active.'xControl Display shows suitable parking
spaces at the edge of the road next to the vej
hicle symbol. When the parking assistant is active, suitable parking spaces are highj
lighted.'xIf a diagonal or parallel parking space is clearly detected, the system automatically adjusts
the suitable parking method. In the case of
parking spaces suitable for parallel and diagoj
nal parking, a selection menu is displayed. In
this case, the desired parking method must
be selected manually.'xThe parking procedure is acj
tive. Steering control has been
taken over by system.'xParking space search is always active whenj ever the vehicle is moving forward slow andstraight, even if the system is deactivated.
When the system is deactivated, the displays
on the Control Display are shown in gray.
Parking
using
the
parking
assistant
Parking
1. Press the park assistance button or
shift into reverse gear to switch on the parkjing assistant, refer to page 196. Activate the
parking assistant, if needed.
Parking assistant is activated.
2.Pass the row of parked vehicles at a speed of up to approx. 22 mph/35 km/h and at a disj
tance of maximum 5 ft/1.5 m.
The status of the parking space search and
possible parking spaces are displayed on the
Control Display, refer to page 196.3.Follow the instructions on the Control Disj
play.
The best possible parking position will come
after gear change on the stationary vehicle -
wait for the automatic steering wheel move.
The end of the parking procedure is indicated
on the Control Display.4.Adjust the parking position yourself, if
needed.
Interrupting
manually
The parking assistant can be interrupted at any
time:
'xPress park assistance button.'x "Parking Assistant" Select the symbol on
the Control Display.
Interrupting
automatically
The system is interrupted automatically in the
following situations:
'xIf the driver grasps the steering wheel or takes over steering.'xIf a gear is selected that does not match the
instruction on the Control Display.'xIf the vehicle speed exceeds approx.
6 mph/10 km/h.'xPossibly on snow-covered or slippery road
surfaces.'xWhen there are obstacles that are hard to overcome, such as curbs.Seite 197Driving
comfortCONTROLS197
Online Edition for Part no. 01402989120 - II/18

'xWhen there are obstacles that suddenly apjpear.'xIf the PDC Park Distance Control displays
clearances that are too small.'xIf a maximum number of parking attempts or
the time taken for parking is exceeded.'xWhen deactivating DSC Dynamic Stability
Control.'xWhen switching to another function on the Control Display.
A Check Control message is displayed.
Resuming
An interrupted parking procedure can be continj
ued, if needed.
Reactivate the parking assistant, refer to page 196, and follow the instructions on the
Control Display.
Switching
offThe system can be switched off as follows:
'xPress park assistance button.'xSwitching off the ignition.
System
limits
Safety
information
WARNING
The system can react not at all, too late, incorj
rectly, or without justification due to the system
limits. There is a risk of accidents or risk of damage to property. Follow the information rej
garding the system limits and actively intervene
if needed.
No
parking
assistance
The parking assistant does not offer assistance
in the following situations:
'xIn tight curves.'xWith DSC Dynamic Stability Control deactij vated.'xFor diagonal parking spaces.
Functional
limitations
The system may not be fully functional in the folj
lowing situations:
'xOn bumpy road surfaces such as gravel roads.'xOn slippery ground.'xOn steep uphill or downhill grades.'xWith accumulations of leaves/snow in the
parking space.'xWith ditches or edges, for instance an edge
of a port.
Limits
of
ultrasonic
measurement
Ultrasonic measurements might not function in the following situations:
'xFor small children and animals.'xFor persons with certain clothing, for instancecoats.'xWith external interference of the ultrasound,
for instance from passing vehicles or loud
machines.'xWhen sensors are dirty, iced over, damaged
or out of position.'xUnder certain weather conditions such as
high relative humidity, wet conditions, snowj
fall, extreme heat, or strong wind.'xWith tow bars and trailer couplings of other
vehicles.'xWith thin or wedge-shaped objects.'xWith moving objects.'xWith elevated, protruding objects such as ledges or cargo.'xWith objects with corners and sharp edges.'xWith objects with a fine surface structure
such as fences.'xFor objects with porous surfaces.Seite 198CONTROLSDriving
comfort198
Online Edition for Part no. 01402989120 - II/18

'xIf cargo protrudes.'xLow objects already displayed, for instance
curbs, can move into the blind area of the sensors before or after a continuous tonesounds.
Parking spaces that are not suitable may be dej
tected or suitable parking spaces may not be dej tected at all.
Malfunction
A Check Control message is displayed. The parking assistant failed. Have the system
checked by a dealerss service center or another
qualified service center or repair shop.
Seite 199Driving
comfortCONTROLS199
Online Edition for Part no. 01402989120 - II/18

Climate
controlVehicle
features
andoptions
This chapter describes all standard, country-spejcific and optional features offered with the series. It also describes features that are not necessarilyavailable in your vehicle, e. g., due to the selectedoptions or country versions. This also applies to
safety-related functions and systems. When usj
ing these functions and systems, the applicable laws and regulations must be observed.
Interior
air
quality
The air quality inside the vehicle is improved by
an emissions-tested interior, a microfilter, and a
climate-control system for regulating temperaj
ture, air flow, and recirculated-air mode.
In addition there are other functions which dej
pend on the vehicle's equipment, for instance
microfilter/activated-charcoal filter, automatic clij
mate control with automatic recirculated-air conj
trol AUC, and parked-car ventilation.Automatic
climate
control
1Seat heating, left\_ 912Air distribution settings3Rear window defroster4Air flow5AUTO program6Temperature7Seat heating, right\_ 918Air conditioningSeite 200CONTROLSClimate
control200
Online Edition for Part no. 01402989120 - II/18