BMW 5 SERIES 2016 Owners Manual

Page 91 of 291

Manual transmission:1.Select SPORT or SPORT+ using the Drivjing Dynamics Control.2.Deactivate DSC if needed.
Displayintheinstrumentdisplay
'yCurrent engine speed is displayed in the
tachometer.'yArrow 1: successive yellow illuminated
fields indicate an increase in the speed.'yArrow 2: successive orange illuminated fields indicate the upcoming shift moment.'yArrow 3: fields are illuminated in red. Do
not wait any further to shift.
When the maximum possible speed is
reached, the entire display flashes. When the
maximum speed is exceeded, the supply of
fuel is interrupted in order to protect the enj
gine.
CheckControl Concept
The Check Control system monitors functions
in the vehicle and notifies you of malfunctions
in the monitored systems.
Generalinformation A Check Control message is displayed as a
combination of indicator or warning lights and SMS text messages in the instrument cluster
and in the Head-up Display.
In addition, an acoustic signal may sound and a
SMS text message may appear on the Control Display.
Indicator/warninglights
Generalinformation The indicator and warning lights in the instrujment cluster can light up in a variety of combijnations and colors.
Several of the lights are checked for proper
functioning and light up temporarily when the engine is started or the ignition is switched on.
Redlights
Safetybeltreminder Safety belt on the driver's side is not
buckled. For some country-specific models: passenger belt is not worn or
objects are detected on the front passenger seat.
Indicator lamp flashes or is illuminated: safety
belt on the driver or passenger side is not
buckled. The safety belt reminder can also be
activated if objects are placed on the front pasj
senger seat.
Make sure that the safety belts are positioned correctly.
Airbagsystem Airbag system and belt tensioner arenot working.
Have the vehicle checked immediately
by a dealerss service center or another qualij fied service center or repair shop.
Parkingbrake The parking brake is set.For additional information, see Releasj
ing the parking brake, refer to page 75.Seite 91DisplaysControls91
Online Edition for Part no. 01 40 2 972 586 - VI/16

Page 92 of 291

BrakesystemBraking system impaired. Continue to
drive moderately.
Have the vehicle checked immediately by a dealerss service center or anotherqualified service center or repair shop.
Approachcontrolwarning Indicator lamp illuminates: advance
warning is issued, for example when
there is the impending danger of a colj
lision or the distance to the vehicle ahead is
too small.
Increase distance.
Indicator lamp flashes: acute warning of the
imminent danger of a collision when the vehij
cle approaches another vehicle at a relatively
high differential speed.
Intervention by braking or make an evasive maj
neuver.
Personwarning Symbol in the instrument cluster.If a collision with a person detected in
this way is imminent, the symbol lights
up and a signal sounds.
Symbol in the instrument display.
If a collision with a person detected in
this way is imminent, the symbol lights
up and a signal sounds.
Orangelights
ActiveCruiseControl The number bars shows the selected
distance from the vehicle driving
ahead.
For additional information, refer to Active
Cruise Control with Stop&Go function, ACC,
refer to page 149.Vehicledetection,ActiveCruiseControl
Indicator lamp illuminates: a vehicle hasbeen detected ahead of you.
Indicator lamp flashes: the conditions
are not adequate for the system to work.
The system was deactivated but applies the
brakes until you actively resume control by
pressing on the brake pedal or accelerator
pedal.
Yellowlights
Anti-lockBrakingSystemABS Braking force boost may not be workj
ing. Avoid abrupt braking. Take the lonj ger braking distance into account.
Have the system immediately checked
by a dealerss service center or another
qualified service center or repair shop.
DSCDynamicStabilityControl The indicator lamp flashes: DSC conj
trols the drive and braking forces. The
vehicle is stabilized. Reduce speed and
adapt driving style to the driving circumstanj ces.
The indicator lamp lights up: DSC has malj functioned.
Have the system checked by a dealerss service
center or another qualified service center or rej pair shop.
For additional information, refer to Dynamic Stability Control DSC, refer to page 141.
DSCDynamicStabilityControlis
deactivatedorDTCDynamicTraction Controlisactivated
DSC Dynamic Stability Control is deacj
tivated or DTC Dynamic Traction Conj trol is activated.Seite 92ControlsDisplays92
Online Edition for Part no. 01 40 2 972 586 - VI/16

Page 93 of 291

For additional information, refer to DynamicStability Control DSC, refer to page 141, and
Dynamic Traction Control DTC, refer to
page 142.
FlatTireMonitorFTM The Flat Tire Monitor signals a loss oftire inflation pressure in a tire.
Reduce your speed and stop cauj
tiously. Avoid sudden braking and steering maj
neuvers.
For more information, see Flat Tire Monitor, rej
fer to page 120.
TirePressureMonitorTPM The indicator lamp is illuminated.
The Tire Pressure Monitor reports a
low tire inflation pressure or a flat tire.
Observe the information in the Check Control
message.
The indicator lamp flashes and is then illumij
nated continuously.
No flat tire or loss of tire inflation pressure can
be detected.'yInterference caused by systems or devices
with the same radio frequency: After leavj ing the area of the interference, the system
automatically becomes active again.'yTPM was unable to complete the reset. Reset the system again.'yA wheel without TPM electronics is
mounted: Have it checked by a dealerss service center or another qualified service
center or repair shop as needed.'yMalfunction: have the system checked by a
dealerss service center or another qualified service center or repair shop.
For more information, see Tire Pressure Monijtor, refer to page 116.
Steeringsystem
Steering system in some cases not
working.
Have the steering system checked by a
dealerss service center or another qualified service center or repair shop.
Enginefunctions Engine function impaired.
Have the vehicle checked by a dealerss
service center or another qualified
service center or repair shop.
For additional information, refer to On-board
Diagnostics socket, refer to page 251.
Lanedeparturewarning System is switched on and under cerj
tain circumstances warns if a detected lane is left without flashing beforehand.
For additional information, refer to Lane deparj
ture warning, refer to page 134.
Greenlights Turnsignal Turn signal switched on.
Unusually rapid flashing of the indicator
lamp indicates that a turn signal bulb
has failed.
For additional information, refer to Turn signal, refer to page 78.
Parkinglights,headlight Parking lights or headlights are actij
vated.
For additional information, refer to
Parking lights/low beams, headlamp control,
refer to page 107.Seite 93DisplaysControls93
Online Edition for Part no. 01 40 2 972 586 - VI/16

Page 94 of 291

FrontfoglightsFront fog lights are activated.
For additional information, refer to Front fog lights, refer to page 110.
High-beamAssistant High-beam Assistant is switched on.
High beams are switched on and off
automatically depending on the traffic
situation.
For additional information, refer to High-beam
Assistant, refer to page 110.
Cruisecontrol The system is switched on. It maintains
the speed that was set using the conj trol elements on the steering wheel.
AutomaticHold Automatic Hold is activated. The vehij
cle is automatically held in place when it is stationary.
For more information, see Automatic Hold, rej
fer to page 76.
Bluelights
Highbeams High beams are activated.
For additional information, see High
beams, refer to page 78.
Generallamps
CheckControl At least one Check Control message is
displayed or is stored.SMStextmessages
SMS text messages in combination with a
symbol in the instrument cluster explain a Check Control message and the meaning ofthe indicator and warning lights.
SupplementarySMStextmessages Additional information, such as on the cause ofan error or the required action, can be called upvia Check Control.
With urgent messages the added text will be
automatically displayed on the Control Display.
Symbols
Depending on the Check Control message, the
following functions can be selected.'y "Owner's Manual"
Display additional information about the Check Control message in the IntegratedOwner's Manual.'y "Service request"
Contact a dealerss service center or anj other qualified service center or repair
shop.'y "Roadside Assistance"
Contact Roadside Assistance.
HidingCheckControlmessages
Press and hold button on signal lever.
'ySome Check Control messages are disj
played continuously and are not cleared
until the malfunction is eliminated. If sevjSeite 94ControlsDisplays94
Online Edition for Part no. 01 40 2 972 586 - VI/16

Page 95 of 291

eral malfunctions occur at once, the mesjsages are displayed consecutively.
These messages can be hidden for approx. 8 seconds. After this time, they are disj
played again automatically.'yOther Check Control messages are hidden automatically after approx. 20 seconds.
They are stored and can be displayed
again later.
DisplayingstoredCheckControl
messages
On the Control Display:
1."Vehicle info"2."Vehicle status"3. "Check Control"4.Select the SMS text message.
Messagesaftertripcompletion Special messages displayed while driving are
displayed again after the ignition is switched
off.
Fuelgauge Vehicle tilt position may causethe display to vary.
Depending on the equipment
version, the arrow beside the
fuel pump symbol shows which
side of the vehicle the fuel filler flap is on.
Notes on refueling, refer to page 212.
The yellow indicator lamp illuminates,
once the fuel reserve is reached.
Tachometer Always avoid engine speeds in the red warning
field. In this range, the fuel supply is interj
rupted to protect the engine.
Engineoiltemperature'yCold engine: the pointer is at
the low temperature end.
Drive at moderate engine
and vehicle speeds.'yNormal operating temperaj
ture: the pointer is in the
middle or in the left half of
the temperature display.'yHot engine: the pointer is at the high end of the temperature range. A Check Control
message is also displayed.
When the engine oil temperature is too
high, a red indicator lamp is displayed.
Coolanttemperature If the coolant along with the engine becomes
too hot, a Check Control message is displayed.
A red indicator lamp is displayed.
Check the coolant level.
Odometerandtripodometer Display
'yOdometer, arrow 1.'yTrip odometer, arrow 2.
Show/resetmiles Press the button.
'yWhen the ignition is
switched off, the time, the
external temperature and
the odometer are displayed.Seite 95DisplaysControls95
Online Edition for Part no. 01 40 2 972 586 - VI/16

Page 96 of 291

'yWhen the ignition is switched on, the trip
odometer is reset.
Externaltemperature
WARNING
Even at temperatures above +37 

Page 97 of 291

Displayingthecurrentfuel
consumption1."Settings"2."Instrument cluster"3."Additional indicators"
The bar display for the current fuel consumpj
tion is displayed in the instrument cluster.
Energyrecovery
Display The kinetic energy of the vehicle
is converted to electrical energy
while Coasting. The vehicle batj
tery is partially charged and fuel
consumption can be reduced.
Servicerequirements
Concept
The function displays the service requirements
and the corresponding maintenance scopes.
Generalinformation After the ignition is turned on the instrument
cluster briefly displays available driving disj
tance or time to the next scheduled maintej
nance.
A service advisor can read out the current service requirements from your remote conj trol.
Display
Detailedinformationonservice
requirements
More information on the scope of service rej
quired can be displayed on the Control Disj
play.1."Vehicle info"2."Vehicle status"3. "Service required"
Required maintenance procedures and lej gally mandated inspections are displayed.4.Select an entry to call up detailed informajtion.
Symbols
Symj
bolsDescriptionNo service is currently required.The deadline for scheduled maintej
nance or a legally mandated inspecj tion is approaching.The service deadline has already
passed.
Enteringappointmentdates
Enter the dates for the required vehicle inspecj tions.
Make sure that the vehicle's date and time are set correctly.
On the Control Display:
1."Vehicle info"2."Vehicle status"3. "Service required"4."g Vehicle inspection"5."Date:"Seite 97DisplaysControls97
Online Edition for Part no. 01 40 2 972 586 - VI/16

Page 98 of 291

6.Adjust the settings.7.Confirm.
The entered date is stored.
AutomaticServiceRequest
Data regarding the service status or legally mandated vehicle inspections is automaticallytransmitted to your dealerss service center bej
fore a service due date.
You can check when your dealerss service cenj
ter was notified.
On the Control Display:
1."Vehicle info"2."Vehicle status"3.Open "Options".4."Last Service Request"
Gearshiftindicator
Concept
The system recommends the most fuel effij
cient gear for the current driving situation.
Generalinformation
Depending on the vehicle's features and counj
try version of the vehicle, the gear shift indicaj tor is active in the manual mode of the Stepjtronic transmission and with manual
transmission.
Suggestions to shift gear up or down are disj
played in the instrument cluster.
On vehicles without a gear shift indicator, the
engaged gear is displayed.
Manualtransmission:displayingSymbolDescriptionFuel efficient gear is set.Shift up to fuel efficient gear.Shift down to fuel efficient gear.Shift into neutral.
Steptronictransmission:displaying
ExampleDescriptionFuel efficient gear is set.Shift into fuel efficient gear.
SpeedLimitInfo
SpeedLimitInfo
Concept
Speed Limit Info shows the current maximum permitted speed in the instrument cluster.
Generalinformation
The camera in the area of the interior mirror
detects traffic signs at the edge of the road as
well as variable overhead sign posts. Traffic
signs with extra symbols for wet road condij tions, etc. are also detected and compared
with the vehicle's onboard data, such as for the rain sensor, and will be displayed depending
on the situation. The system takes into acj count the information stored in the navigation
Seite 98ControlsDisplays98
Online Edition for Part no. 01 40 2 972 586 - VI/16

Page 99 of 291

system and also displays speed limits present
on routes without signs.
Safetyinformation WARNING
The system does not release from the
personal responsibility to correctly assess visij
bility and traffic situation. There is a risk of an
accident. Adjust the driving style to the traffic
conditions. Watch traffic closely and actively intervene in the respective situations.'

Page 100 of 291

'yWhen signs that are valid for a parallel roadare detected.
Selectionlistsinthe
instrumentcluster
Generalinformation Depending on your vehicle's equipment, the
following can be displayed or operated using the buttons and the thumbwheel on the steerj
ing wheel as well as the displays in the instruj
ment cluster and the Head-up Display:
'yCurrent audio source.'yRedial phone feature.'yTurn on voice activation system.
Activatingalistandadjustingthe
setting
On the right side of the steering wheel, turn
the thumbwheel to activate the corresponding list.
1.Turn the thumbwheel and select the dej
sired setting.2.Press the thumbwheel.Display
Depending on your vehicle's optional features, the list in the instrument cluster can differ from
the illustration shown.
Onboardcomputer
Indicationintheinfodisplay The information from the onj
board computer is shown in the
info display in the instrument
cluster.
CallingupinformationontheCID
(centralinformationdisplay)
Press and hold button on signal lever.
Information is displayed in the CID (central inj
formation display) of the instrument cluster.
Informationataglance Repeatedly pressing the button on the turnsignal lever calls up the following information inthe CID (central information display):
Seite 100ControlsDisplays100
Online Edition for Part no. 01 40 2 972 586 - VI/16

Page:   < prev 1-10 ... 51-60 61-70 71-80 81-90 91-100 101-110 111-120 121-130 131-140 ... 300 next >