BMW X2 2023 Owners Manual
Page 131 of 308
Resetting average values
Press and hold the button on the turn signal
lever.
The average consumption since delivery from the factory cannot be reset.
Engine temperature display Principle
Depending on the vehicle equipment, the cur
Page 132 of 308
Resetting the on
Page 133 of 308
General information
The warning is repeated if the vehicle speed exceeds the set speed limit again, after it has
dropped below it by 3 mph/5 km/h.
Adjusting
Via iDrive:1."My Vehicle"2."Vehicle settings"3."Speed warning"4."Warning at:"5.Turn the Controller until the desired speed
is displayed.6.Press the Controller.
Activate/deactivate
Via iDrive:
1."My Vehicle"2."Vehicle settings"3."Speed warning"4."Speed warning"
Accept current speed as the speed
warning
Via iDrive:
1."My Vehicle"2."Vehicle settings"3."Speed warning"4."Select current speed"
Head
Page 134 of 308
Selecting displays in the Head
Page 135 of 308
Follow the instructions for cleaning the Head
Page 136 of 308
LightsVehicle features and options
This chapter describes all standard, country
Page 137 of 308
Canada: roadside parking light
Principle The vehicle can be illuminated on one side.
Turning on
With radio
Page 138 of 308
The indicator light in the instrument cluster isilluminated when the low beams are switched
on.
System limits The automatic headlight control cannot re
Page 139 of 308
The high beams can be switched on and offmanually at any time.
Activate/deactivate
Switch position, depending on the vehicle
equipment:
,
Press the button on the turn signal lever.
The indicator light in the instrumentcluster is illuminated when the low
beams are switched on.
The headlights are automatically changed be
Page 140 of 308
AdjustingAdjust the brightness with the
thumbwheel.
Interior lights
General information
Depending on the equipment, the interior
lights, footwell lights, entry lights, and courtesy lights are controlled automatically.
The thumbwheel for the instrument lightingcontrols brightness of some of these features.
Overview
1Interior lights2Reading lights
Switching the interior lights on/off Press the button.
To switch off permanently: press the button
and hold for approx. 3 seconds.
Switching the reading lights on/off Press the button.
Depending on the vehicle equipment, the read