display BMW X2 2023 Owner's Manual
Page 150 of 308
The status is displayed.
Initialization required An initialization must be performed in the fol
Page 166 of 308
tem reduces the speed to the set value, within
the physical limits.
Only use Hill Descent Control in low gears or in selector lever position D or R.
Overview Button in the vehicle
Hill Descent Control
Activate Hill Descent Control Press the button. The LED above the
button lights up.
Speeds between approx. 2 mph/3 km/h and approx. 20 mph/30 km/h are adopted as theset speed.
Display in the instrument cluster An icon and the selected desired
speed are displayed.
Page 172 of 308
The indicator lights in the instrument clusterlight up and the mark in the speedometer is set
to the current speed.
Cruise control is active and maintains the set
speed.
If necessary, the Dynamic Stability Control will be turned on.
Turning off
To switch off the system while standing, step on brake pedal at the same time.
Press the button on the steering
wheel.
The displays turn off. The stored set speed is
deleted.
Interrupting manually Press the button on the steering
wheel.
If interrupting the system while stationary,
press on the brake pedal at the same time.
Interrupting automatically The system is automatically interrupted in thefollowing situations:
Page 175 of 308
is being pressed; a vehicle was detected.
Displays in the Head
Page 181 of 308
The rearview camera image is displayed if the
reverse gear is engaged when pressing the
park assistance button.
Depending on the equipment version, the sys
Page 191 of 308
3Air flow4Air flow display5Air recirculation mode6Temperature7Seat heating, right 828Rear window defroster9Seat heating, left 82Climate control functions in detail
Switching the system on/off Turning on
Press any button except for the following:
Page 206 of 308
LED displaysColorMeaningBlueThe mobile phone is charging.
Depending on the model and the ve
Page 226 of 308
General information
The system includes the following
EfficientDynamics functions and
EfficientDynamics displays:
Page 228 of 308
Displaying consumption history
The average consumption can be displayed on the Control Display.
Via iDrive:1."My Vehicle"2."Technology in action"3."EfficientDynamics"4. Select the icon.
Vertical bars show consumption for the se
Page 229 of 308
Activating/deactivating coasting via
shift paddles1.Shift to the highest gear by pulling the right
shift paddle.2.To activate Coasting mode, actuate the right shift paddle again.
To deactivate, actuate the left shift paddle.
Display
Display in the instrument cluster
The tachometer shows the idle speed. The mark in the efficiency display is backlit inblue and is located at the zero point. The
coasting point indicator is illuminated at the zero point during coasting.
Indications on the Control Display The Coasting mode is displayed in
EfficientDynamics while driving.
The distance traveled in Coasting mode is shown in the consumption history. The meterreading is reset prior to every departure.
Displaying EfficientDynamics
information
Via iDrive:
1."My Vehicle"2."Technology in action"3."EfficientDynamics"4. Select the icon.
System limits
The function is not available if one of the fol