light BMW X2 2023 Owners Manual

Lights and lightingLighting functionsIconFunctionBad weather light.Automatic headlight control.
Cornering light and variable light dis

Set interval period or sensitivity of the rain
sensor
Turn the thumbwheel on the wiper lever.
Cleaning the windshield and
headlights
Pull the lever.
Rear wiper Turning on
Turn the outer switch upward.

Low beams 136Automatic headlight control 137
Cornering light 138
Automatic High Beam Assis

With Comfort Access: convenient
closing
Safety information
Warning
With convenient closing, body parts can be
jammed. There is a risk of injury. Make sure
that the area of movement of the doors is
clear during convenient closing.
Closing
Press and hold the button on the vehicle
key in close range to the vehicle.
The windows and the glass sunroof are
closed, as long as the button on the vehicle key
is pressed.
The exterior mirrors are folded in. The exterior mirrors are not folded in when the
hazard warning flashers are switched on.
Switching on interior lights and
courtesy lights
Press the button on the vehicle key with
the vehicle locked.
This function is not available, if the interior
lights were switched off manually.
The lighting functions may depend on the am

Backrest tilt1.Pull loop to unlock the backrest.2.Apply or lift weight on the backrest as
needed.
After the adjustment, move the backrest
slightly forward or back to engage it correctly.
Seat belts
General information
The vehicle is fitted with five seat belts to en

Overview
Storing
1.Turn on the ignition.2.Set the desired position.3. Press the button. The LED in the
button lights up.4.Press the desired button 1 or 2 while the
LED is lit. The LED goes out.
Button was pressed inadvertently:
Press the button again.
The LED goes out.
Calling up settings
The stored position is called up automatically.
Press the desired button 1 or 2.
The procedure stops when a seat setting switch or one of the memory buttons ispressed.
Once underway, adjustment of the seat posi

The indicator lights light up red, a sig

Triple turn signal activationLightly tap the lever up or down.
The turn signal flashes three times.
The function can be activated or deactivated.
Via iDrive:1."My Vehicle"2."Vehicle settings"3."Lighting"4."Exterior lighting"5."One

Check Control
PrincipleThe Check Control system monitors functionsin the vehicle and notifies you of faults in the
monitored systems.
General information
A Check Control message is displayed as a combination of indicator or warning lights and
text messages in the instrument cluster and in
the Head

Orange lightsActive Cruise Control The number bars shows the selecteddistance from the vehicle driving
ahead.
Camera