light BMW X2 2023 User Guide

LightsVehicle features and options
This chapter describes all standard, country

Canada: roadside parking light
Principle The vehicle can be illuminated on one side.
Turning on
With radio

The indicator light in the instrument cluster isilluminated when the low beams are switched
on.
System limits The automatic headlight control cannot re

The high beams can be switched on and offmanually at any time.
Activate/deactivate
Switch position, depending on the vehicle
equipment:
,
Press the button on the turn signal lever.
The indicator light in the instrumentcluster is illuminated when the low
beams are switched on.
The headlights are automatically changed be

AdjustingAdjust the brightness with the
thumbwheel.
Interior lights
General information
Depending on the equipment, the interior
lights, footwell lights, entry lights, and courtesy lights are controlled automatically.
The thumbwheel for the instrument lightingcontrols brightness of some of these features.
Overview
1Interior lights2Reading lights
Switching the interior lights on/off Press the button.
To switch off permanently: press the button
and hold for approx. 3 seconds.
Switching the reading lights on/off Press the button.
Depending on the vehicle equipment, the read

Measure1.Reduce your speed and drive moderately.
Do not exceed a speed of
80 mph/130 km/h.2.At the next opportunity, for instance filling station, check and correct the tire inflation
pressure in all four tires, if necessary.3.Reset the system.
If there is a significant tire pressure
loss
Message A yellow warning light is illuminated in
the instrument cluster.
In addition, an icon with the affected tire ap

tem reduces the speed to the set value, within
the physical limits.
Only use Hill Descent Control in low gears or in selector lever position D or R.
Overview Button in the vehicle
Hill Descent Control
Activate Hill Descent Control Press the button. The LED above the
button lights up.
Speeds between approx. 2 mph/3 km/h and approx. 20 mph/30 km/h are adopted as theset speed.
Display in the instrument cluster An icon and the selected desired
speed are displayed.

The indicator lights in the instrument clusterlight up and the mark in the speedometer is set
to the current speed.
Cruise control is active and maintains the set
speed.
If necessary, the Dynamic Stability Control will be turned on.
Turning off
To switch off the system while standing, step on brake pedal at the same time.
Press the button on the steering
wheel.
The displays turn off. The stored set speed is
deleted.
Interrupting manually Press the button on the steering
wheel.
If interrupting the system while stationary,
press on the brake pedal at the same time.
Interrupting automatically The system is automatically interrupted in thefollowing situations:

Press and hold this button.
The indicator light in the instrument cluster lights up.
To switch distance control back on, press but

Indicator/warning lightsWhen the hood is unlocked, a Check Control
message is displayed.
Closing the hood
Energetically close the hood from approx.
20 in/50 cm.
The hood must engage on both sides.
Seite 258MOBILITYEngine compartment258
Online Edition for Part no. 01405A540A1