BMW X4 2018 Owners Manual

The symbol on the automatic climate conj
trol flashes when the system has been switched on.
The system will only be switched on within the
next 24 hours. After that, it needs to be reactij vated.Seite 171Climate
controlControls171
Online Edition for Part no. 01402977904 - II/17

Interior
equipmentVehicle
features
and
optionsThis chapter describes all standard, country-specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Universal
Integrated
Remote
Control
Concept
The integrated Universal Remote Control in
the interior mirror can operate up to 3 funcj
tions of remote-controlled systems, such as
garage door drives or lighting systems. The integrated Universal Remote Control replaces
up to 3 different hand-held transmitters. To
operate the remote control, the buttons on the
interior mirror must be programmed with the
desired functions. The hand-held transmitter
for the particular system is required in order to
program the remote control.
Before selling the vehicle, delete the stored
functions for the sake of security.
Safety
information WARNING
Body parts can be jammed when operatj
ing remote-controlled systems, e.g., the gaj
rage door, using the integrated universal rej mote control. There is a risk of injury or risk ofproperty damage. Make sure that the area ofmovement of the respective system is clear
during programming and operation. Also followthe safety instructions of the hand-held transj
mitter.'

proximately 20 seconds until the LED on
the interior mirror flashes. This erases all
programming of the buttons on the interior mirror.3.Hold the hand-held transmitter for the sysjtem to be controlled approx. 1 to 3 inj
ches/2.5 to 8 cm away from the buttons of
the interior mirror. The required distance
depends on the hand-held transmitter.4.Simultaneously press and hold the button
of the desired function on the hand-held transmitter and the button to be programj
med on the interior mirror. The LED on the
interior mirror will begin flashing slowly.5.Release both buttons as soon as the LED flashes more rapidly. The LED flashing
faster indicates that the button on the intej
rior mirror has been programmed.
If the LED does not flash faster after at
least 60 seconds, change the distance bej
tween the interior mirror and the hand-held transmitter and repeat the step. Several
more attempts at different distances may be necessary. Wait at least 15 seconds bej
tween attempts.
Canada: if programming with the hand- held transmitter was interrupted, hold
down the interior mirror button and repeatj
edly press and release the hand-held
transmitter button for 2 seconds.6.To program other functions on other butj
tons, repeat steps 3 to 5.
The systems can be controlled using the intej
rior mirror buttons.
Special
feature
of
the
rolling
code
wireless
system
If you are unable to operate the system after
repeated programming, please check if the system to be controlled features a rolling coderadio system.
Read the system's owner's manual, or press the programmed button on the interior mirror longer. If the LED on the interior mirror starts
flashing rapidly and then stays lit constantly for
2 seconds, the system features a rolling code
radio system. Flashing and continuous illumij
nation of the LED will repeat for approximately
20 seconds.
For systems with a rolling code radio system,
the integrated Universal Remote Control and the system also have to be synchronized.
Please read the owner's manual to find out
how to synchronize the system.
Synchronizing is easier with the aid of a secj
ond person.
Synchronizing the universal remote control with the system:1.Park the vehicle within range of the rejmote-controlled system.2.Program the desired button on the interiormirror as described.3.Locate and press the synchronizing button
on the system being programmed. You
have approx. 30 seconds for the next step.4.Hold down the programmed button on the
interior mirror for approximately 3 seconds
and then release it. If necessary, repeat this step up to three times in order to finish
synchronization. Once synchronization is
complete, the programmed function will be carried out.
Reprogramming
individual
buttons
1.Switch on the ignition.2.Press and hold the interior mirror button tobe programmed.3.As soon as the interior mirror LED starts
flashing slowly, hold the hand-held transj
mitter for the system to be controlled apj prox. 1 to 3 inches/2.5 to 8 cm away from
the buttons of the interior mirror. The rej
quired distance depends on the hand-held transmitter.Seite 173Interior
equipmentControls173
Online Edition for Part no. 01402977904 - II/17

4.Likewise, press and hold the button of the
desired function on the hand-held transj mitter.5.Release both buttons as soon as the intej
rior mirror LED flashes more rapidly. The LED flashing faster indicates that the butj
ton on the interior mirror has been proj
grammed. The system can then be conj
trolled by the button on the interior mirror.
If the LED does not flash faster after at
most 60 seconds, change the distance and
repeat the programming starting with
step 4. Several more attempts at different
distances may be necessary. Wait at least 15 seconds between attempts.
Canada: if programming with the hand-
held transmitter was interrupted, hold
down the interior mirror button and repeatj
edly press and release the hand-held
transmitter button for 2 seconds.
Operation
WARNING
Body parts can be jammed when operatj
ing remote-controlled systems, e.g., the gaj
rage door, using the integrated universal rej
mote control. There is a risk of injury or risk of
property damage. Make sure that the area of movement of the respective system is clear
during programming and operation. Also follow
the safety instructions of the hand-held transj
mitter.'

The ashtray can be inserted in the cup holder.
Emptying Take out the insert.
Lighter WARNING
Contact with hot heating elements or the
hot socket of the cigarette lighter can cause burns. Flammable materials can ignite if thecigarette lighter falls down or is held against
the respective objects. There is a risk of fire
and injuries. Hold the cigarette lighter by its
handle. Make sure that children do not use the cigarette lighter and burn themselves.'

Front
center
console
Slide the cover forward.
Remove the cover or cigarette lighter.
Center
armrest
Remove the cover.
Rear
center
console
Remove the cover.
In
the
cargo
area
The socket is located on the right side in the
cargo area.
USB
interface/AUX-IN
port
Concept
Mobile devices with USB port can be conj
nected to the USB interface.
A mobile audio device, for instance a MP3 player, can be connected using the AUX-IN
port.
General
information
Depending on the equipment, the USB interj
face is located in the center console or in the glove compartment.
USB
interface
in
the
glove
compartment
Mobile storage devices with USB port can be
connected to the USB interface in the glove compartment.
Common file systems are supported. FAT32 and exFAT are the recommended formats.
The following applications are possible:
'yExporting and importing profiles, refer to
page 44.'yLoading of software updates.'yAdding music files to the music collection
and saving the music collection.Seite 176ControlsInterior
equipment176
Online Edition for Part no. 01402977904 - II/17

USB
interface
in
the
center
consoleIn addition to the USB storage devices descrijbed above, additional mobile devices with USB
port can be connected to the USB interface in
the center console.'yMobile phones supported by the USB inj
terface.
The snap-in adapter features a separate USB port that is automatically connected
when a compatible mobile phone is inj
serted.'yAudio devices with USB port, for example
MP3 player.
This allows further uses:
'yPlaying music files via USB audio.'yPlaying video films via USB video.
Information about compatible USB devices can be found at www.bmwusa.com/bluetooth.
Overview
The USB interface and the AUX-IN port are loj cated in the center armrest.
The USB interface is located in the glove comjpartment.
Connecting
an
external
device
Observe the following when connecting:'yDo not use force when plugging the conjnector into the USB interface.'yUse a flexible adapter cable.'yProtect the USB storage device againstmechanical damage.'yDue to the large number of USB mediaavailable on the market, it cannot be guarj
anteed that every device is operable on the
vehicle.'yDo not expose USB media to extreme envij
ronmental conditions, such as very high
temperatures; refer to the owner's manual of the device.'yDue to the many different compressiontechniques, proper playback of the media
stored on the USB storage device cannot
be guaranteed in all cases.'yA connected USB storage device will be
supplied with charging current via the USB interface if the device supports this. At
higher temperatures, the USB storage dej vice may cause a reduction in the charging
current.'yTo ensure proper transmission of the stored data, do not charge a USB storage
device via the onboard socket, when it is
connected to the USB interface.'yDepending on how the USB storage device is being used, settings may be required on
the USB storage device, refer to the ownj er's manual of the device.
Non-compatible USB media:
'yUSB hard drives.'yUSB hubs.'yUSB memory card readers with multiple inj
serts.'yHFS-formatted USB media.'yMTP devices.'yDevices such as fans or lamps.Seite 177Interior
equipmentControls177
Online Edition for Part no. 01402977904 - II/17

Cargo
area
Cargo
cover
Safety
information WARNING
Loose objects or devices with a cable
connection to the vehicle, e.g., mobile phones, can be thrown into the vehicle's interior while
driving, e.g., in the event of an accident or durj
ing braking and evasive maneuvers. There is a risk of injury. Secure loose objects or devices
with a cable connection to the vehicle in the vehicle's interior.'

WARNING
With an unlocked backrest, an unsecured
load can be thrown into the vehicle's interior,
e.g., in case of an accident, braking or evasive maneuver. There is a risk of injury. Make sure
that the backrest engages into the locking afj
ter folding it back.'

Storage
compartmentsVehicle
features
and
optionsThis chapter describes all standard, country-specific and optional features offered with theseries. It also describes features that are notnecessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and systems, the applicable laws and regulations
must be observed.
Safety
information WARNING
Loose objects or devices with a cable
connection to the vehicle, e.g., mobile phones, can be thrown into the vehicle's interior while
driving, e.g., in the event of an accident or durj
ing braking and evasive maneuvers. There is a risk of injury. Secure loose objects or devices
with a cable connection to the vehicle in the
vehicle's interior.'