load capacity BUICK LACROSSE 2005 Get To Know Guide

Getting to Know YourLaCrosse12
MP3Capable Uplevel Radio
(if equipped)
Play MP3 files on CDR CDs of up to
700MB capacity. To play, with the ignition on, insert the disc partway into the
slot, label side up. The player will pull itin. “READING” appears on the display
and the disc plays. Smaller, 3inch
(8cm) single CDs may be used with
an adapter ring.
3 (Repeat):Press to hear a track
over again. RPT is displayed. Press
again to disable repeat play.
5 (Previous Folder):Press to go to
the first track in the previous folder.Pressing while in the Folder Randommode takes you to the previous folderand plays random tracks there.
6(Next Folder):Press to go to the
first track in the next folder. Pressingwhile in Folder Random mode takes youto the next folder and plays randomtracks there.
SixDisc CD Player (if equipped)
To load multiple CDs in the sixdisc
CD player:
1.Turn the ignition on. Press and hold
the Load button for two seconds. The
player beeps and the light to the right
of the slot will flash. “MULTI LOAD #”is displayed.
2.When the light stops flashing and
turns green, “INSERT CD #” is
displayed. Insert a disc partway, label side up.
3. Indicator light will begin blinking and
turn green. Another disc may beloaded.
4. When loading two to five CDs, press
the Load button again after loadingthe final CD.
For every CD loaded, a number appears
on the radio display. To play a specific
disc, press CD and the number of the
CD you want to hear. A small barappears under the CD number that isplaying, and the track number appears.
Finding a Category Station
(if equipped)
Category (CAT) stations are available on
XM1 or XM2 bands only. To find a CAT
station:
1. Press the CAT button to activate
Program Type (PTY) Select mode.
2. A category is displayed.3.Rotate the Tune knob. When the
preferred category appears, press theSeek button to go to the first categorystation (Pressing Seek for more thantwo seconds will activate CategoryScan).
4. To go to another station, press the
CAT button. The previously storedcategory will be displayed.
5. Press the up or down Seek button.
6. Press the CAT button to exit Program
Type Select mode.
Steering Wheel Controls (if equipped)
See Radio and CDControls for full details
about the functions of the following buttons:
•
(Seek)
•BAND
•16 (Preset Stations)
•(OnStar®/Mute):Press to silence
audio, and again to play. In OnStarequipped vehicles, press to interactwith the OnStar system.
•
(VOLUME):Press up/down
arrow to increase/decrease volume.
See Section 3 of your Owner Manual.