warning BUICK LACROSSE 2007 Get To Know Guide

A.Air Outlets
B.Interior Lamps Control
C.Exterior Lamps Control/Fog Lamp
Control
D.Turn Signal/Multifunction Lever
ECruise Controls
F.Instrument Panel Cluster G.DIC Buttons (if equipped)/Hazard
Warning Flasher Button
H.Passenger Airbag Status Indicator
I.Audio System Controls
J.Hood Release
K.Parking Brake
L.Tilt Lever (if equipped)M.Horn
N.Audio Steering Wheel Controls
(if equipped)
O.Shift Lever
P.Accessory Power Outlet
Q.Climate Controls
R.Glove Box
Getting to Know YourLaCrosse2
Instrument Panel
See Section 3 of your Owner Manual.
DRIVER INFORMATION
LaCrosse 2007 A.qxd 4/25/06 11:14 AM Page 2

Getting to Know YourLaCrosse4
Driver Information Center (DIC)
The baselevel Driver Information
Center (DIC) displays the odometer and
trip odometer. Uplevel DICs also display
a compass, trip computer, fuel economyinformation, OnStar
®phone numbers
called (if equipped) and other messages
or warnings. The DIC display is locatedon the instrument cluster below the
speedometer, and can be programmedin English, French or Spanish.
The outside temperature displays in the
bottomright corner of the uplevel DICwhen viewing the trip/odometer screens,fuel screens and some gauge screens.At 37ºF (3ºC) or below, readings toggle
between temperature and the word ICEfor two minutes.
The following DIC controls are located in
the center of the instrument panel:
TRIP/ODO (Trip/Odometer):On the
base DIC, press to display odometer/tripdistance. Uplevel DICs also display timeelapsed and average speed.
Vehicle Symbols
Following are examples of symbols you
may find on your vehicle. It is importantto become familiar with them, as theyindicate vehicle features and alert you to various vehicle operating conditions.
Air Conditioning (A/C)Air RecirculationDIC Fuel
DIC GaugesDIC Option DIC Set/Reset
Fog LampsHeadlamps
Off
Off/On
OnParking Lamps
Rear Window Defogger
Remote Vehicle Start
LaCrosse 2007 A.qxd 4/25/06 11:14 AM Page 4

5
E/M (English/Metric):On the base DIC,
press to choose English or Metric units.
On uplevel DICs, press the (Option)button until UNITS appears. Press the
(Set/Reset) button to choose English
or Metric units.
(Set/Reset)(if equipped): Press to
set/reset certain functions and to turn
off/acknowledge DIC messages.
(Gauges)(if equipped): Press to dis
play battery and oil life. To reset the OilLife System after an oil change, press
and hold the button while OIL LIFE
is displayed until it shows 100%.
(Fuel)(if equipped): Press to display
fuel range and average economy.
(Option) (if equipped): Press to dis
play English/Metric units, language,
personalization, compass zone andcompass calibration.
(Traction Control)(if equipped):
Press to turn traction control on or off.
(Hazard):Press to turn the hazard
warning flashers on or off.
Personalizing the DIC (if equipped)
Uplevel DICs can memorize selected
personalized settings for up to two drivers. (Some features are limited to asingle setting.)
1. Place the vehicle in Park (P) and turn
on the ignition.
2. Press the (Option) button until
PERSONALPROGRAM is
displayed.
3. Press the (Set/Reset) button
to display instructions.
4.Press the button to display
programmable features.
5. Press the button to change the
setting of each feature.
Your ignition key identifies you to the
vehicle.Two keys can be programmed
for certain features that correspond to
each driver. To personalize a key:
1. From the Personal Program menu,
press the (Option) button until
PERSONALIZE KEY is displayed.
2. Press the (Set/Reset) button until
YES is displayed.
3. Press the button.Personalization Features include:
Delayed Locking— Delays locking
of the vehicle doors for up to five
seconds after the last door is closed.
Two chimes will sound when the powerdoor lock switch or the Lock button onthe Remote Keyless Entry transmitter
is pressed when a door is open. Toprogram:
1. From the Personal Program menu,
press the (Option) button untilDELAYED LOCKING is displayed.
2. Press the (Set/Reset) button until
ON or OFF appears.
3.Press the button to select it.
The ignition key must be removed for
the feature to work after programming.
Key Fob Feedback— Choose from Off
(no feedback), Lights (exterior lightsflash) or Lights and Horn when you
press the Remote Keyless Entry transmitter (key fob) Lock button. To program:
1. From the Personal Program menu,
press the (Option) button until FOB LOCK FEEDBACK is displayed.
2. Press the (Set/Reset) button until
the desired setting is displayed.
3.Press the button to save the
setting.
LaCrosse 2007 A.qxd 4/25/06 11:14 AM Page 5