key CADILLAC XLR V 2007 1.G Workshop Manual

Adding a Waypoint
To add a waypoint to your route, do the following:
1. Touch Add Waypoint.
2. Enter a destination. SeeEnter Destination on
page 259.
A map will appear showing the location of the
waypoint.
3. Touch Enter to add your waypoint.
4. Touch the ADD screen button to insert the
waypoint in the desired order.
5. The system will display the ROUTE
INFORMATION screen. From this screen,
several options are available.List:Touch List to view the waypoint on the map
or to change the order of the waypoints and
nal destination. To change the order, touch CHG
ORDER, then touch the blank screen button
next to the destination to select the order of the
waypoints and nal destination. Press the
MAP key to view the destination and waypoints on
the map screen.
Delete:Touch Delete to delete a waypoint or the
nal destination. A conrmation window will
appear. Touch YES to delete the point or NO to
return to the previous screen.
255

Delete All:Touch Delete All to delete all of the
waypoints and the nal destination. A conrmation
window will appear. Touch YES to delete all
waypoints or NO to return to the previous screen.
Change:Touch Change to change the nal
destination. Enter a destination. SeeEnter
Destination on page 259.
Add:Touch Add to add additional waypoints.
Refer to the steps for adding a waypoint
listed previously in this section.
Calculate:Touch Calculate to begin route
calculation. This feature will only be available if
the nal destination has been set.Editing a Waypoint
This feature allows you to edit waypoints that have
already been set. To edit a waypoint, do the
following:
1. Touch Edit Waypoint.
2. Touch the MAP key to view the destination
location on the map screen.
3. Touch CHANGE ORDER to change the order
of the waypoints and the nal destination.
You can also use the map scroll to change a
waypoint from one location to another.
Deleting a Waypoint
To delete a waypoint from your route, do the
following:
1. Touch Delete Waypoint.
2. Select the waypoint you want to delete. A
conrmation window will appear.
3. Touch YES to delete the waypoint or NO to
return to the previous menu.
256

Edit Avoid Point/Area
From this menu you can register, edit, and delete
an area to be avoided while planning a route.
These areas can also be saved so the system can
automatically avoid them when planning a route.
To access the AVOID POINT/AREA menu, do the
following:
1. Press the ROUTE key.
2. Touch Edit Avoid Point/Area.
Registering an Avoid Point/Area
To store an avoid point/area, do the following:
1. Touch Register Avoid Point/Area.
2. Enter a location. SeeEnter Destination on
page 259.
3. If desired, reduce or enlarge the area around
the point you want to avoid by using the
REDUCE or ENLARGE screen buttons.
If an avoid point cannot be avoided, the
system will display “Avoid Point and Area
Stored. Route May Not Avoid the Avoid Point
and Areas.”
4. Touch Enter to set the area as an avoid point
area. When using the REDUCE or ENLARGE
buttons, a box will appear to represent the
area or an X will appear to represent the area
avoided. When an avoid point is set, the
square will appear as green.
5. Touch Return to go back to the previous
screen.
257

Easy Planning Route
With this destination entry method, you can select
a destination using the scroll symbol on the
map screen. SeeMaps on page 271.To use this destination entry method, do the
following:
1. Press the MAP key.
2. Touch the map screen twice for the scroll
symbol to appear. Touch the map or drag
the scroll symbol toward your destination.
3. Touch the map screen continuously to scroll
through the map faster. The address of the
location on the map will appear at the
top of the screen.
If needed, use the zoom feature to locate your
destination. See “Map Scales” underMaps
on page 271for more information.
4. Touch ENT DEST to set this location as your
destination. You may also touch MARK to
store this location as a memory point.
5. Touch Enter to plan your route.
260

Address
This destination entry method allows you to input
an address by providing the system with a
house number, street name, and city. Select Street
to begin entering the desired address.
To use this destination entry method, do the
following:
1. Enter the street name using the alpha keypad.
See “Alpha-Numeric Keypad” underUsing the
Navigation System on page 240for more
information.Do not include name extensions such as N. or
Drive. For example, the street name N.
Civic Center Drive should be entered as Civic
Center. As information is entered, the
system will automatically search for available
names, and List will become available.
2. Touch List to view name choices or continue
to spell the street name to further reduce
the number of available items. Select a
street name.
3. If the street name you entered exists in more
than one city on the DVD database, a list of
cities will appear. You can select a city from the
list, or enter the city name by selecting City. As
you begin to enter the city name, you can
select the desired city from the list which will
appear, or continue to spell the city name to
further reduce the number of available items.
4. Once the city name has been selected, enter
the house number using the numeric keypad.
The system will list the house number
range that is available for the street.
5. When you have nished entering all of the
address information, touch Enter to plan
your route.
261

All Points of Interest
This destination entry method allows you to choose
a destination from the point of interest (POI) list.
Selecting All Points Of Interest from the
DESTINATION menu will bring up the alpha
keypad. While inputting a POI or city name, the List
option will become available. As information is
entered, the system will search for available POI
and city names based on the information given. The
system will supply a list of names to make a
selection from when the choices are ve or less.You may search for a POI using the following
three methods:Touch NAME to type in a POI by name using
the alpha key pad. As you type in a name,
the system will search for an available match
to your input. Select the desired POI.
Select a POI by touching CATEGORY. Use
the arrows to scroll through the categories
listed. Select a category along with any
appropriate sub-categories. If the list of
available POIs for the selected category is too
long, you may need to enter the POI’s
name or city.
Select CITY, then type in the city you wish to
select a POI from. Choose a city from the list
of cities that will appear. If the list of POIs
for the selected city is too long, enter the POI’s
name or choose a category.
While inputting a POI or city name, the List option
will become available. Touch List to view the
list of name choices, or continue to spell the name
to further reduce the list of available items.
262

To enter a freeway name, do the following:
1. Touch the Freeway Entrance/Exit symbol.
2. Enter the freeway name using the alpha
key pad.
Freeways sometimes have a name and a
number associated with them which you may
need to refer to when entering freeway
information. Freeways are also referred to by
their abbreviated names. For example,
Interstate 75 in the U.S. is selected by
entering I-75.
As you enter a freeway name, the List option
will become available.
3. Touch List to view the list of available name
choices or continue to spell the name to
further reduce the list of available items. The
system will supply a list of names when
the choice is ve or less.
If you are unsuccessful when inputting a
name, the name may need to be input
differently, the map DVD database may not
contain this information, or the name may
be misspelled.4. Select a freeway from the list.
5. The ENTRANCE or EXIT options will appear.
Choose ENTRANCE to select the entrance to
the freeway, or EXIT to select the exit
ramp of the freeway.
When either button is touched, it will give an
alphabetical list of freeway entrance and
exit ramps on the freeway you entered. You
may touch DIST SORT to sort the list by
distance from your current location, or NAME
SORT to sort the list by name.
6. Select the desired freeway entrance or exit
from the list. A map will appear with the
destination shown.
7. Touch Enter to plan your route.
267

Intersection
This destination entry method allows you to select
a destination by inputting the intersecting roads
you wish to travel to.
To enter an intersection, do the following:
1. Touch the Intersection symbol.
2. Using the alpha keypad, enter the name of
the rst street in the intersection.3. To view a list of choices, touch List or
continue to spell the name to further reduce
the list of available items. The system will
display a list of the intersecting streets if the
number of intersecting streets is ve or less.
4. Select the rst street.
5. Now enter the second street name.
6. Select the second street name from the list of
intersecting streets. To view a list of choices,
touch List or continue to spell the name to
further reduce the list of available items. The
system will display a list of intersecting
streets if the number of intersecting streets is
ve or less.
If there are multiple intersections with the
same two roads, the system will display a list
of cities to choose from. Choose a city
from this list. A map with the intersections for
that city will appear.
7. Touch Enter to plan your route.
268

Route Preference
To change your planning options, use the following
instructions.
1. Press the ROUTE key.
2. Touch Route Preference.The following options will be available from the
ROUTE PREFERENCE menu:Detour
This feature allows you to choose a distance in
miles/kilometers to detour. Select the detour
distance desired for residential roads and freeways.
The system will retain these settings for the next
time you use Detour, unless you change them.
You may also touch Alternate to provide a
new route that does not use previously stored
detour settings.
Touch Return to go back to the previous screen.
269

Display Whole Route
This feature allows you to display your entire
planned route. Total mileage and time to
destination for the planned route will be displayed
on the map screen. Touch Return to go back
to the previous menu.
Calculate Route
This feature allows you to begin route calculation
for the selected destination.
Cancel Route
If you are traveling on a planned route and would
like to cancel it, touch Cancel Route. The
system will ask you to conrm by touching YES.
Touch YES to conrm cancellation of your planned
route or touch Return to keep your planned
route.
Maps
This section includes basic information you need
to know about the map database.
Regional Maps
The maps are stored on a DVD-ROM. The
48 contiguous United States and portions of
Canada are contained on one disc. The U.S. map
database includes interstate freeways, state
highways, country roads, and major and general
streets.
Refer to the “Navigation System Map Disc”
manual to view the explanation of map coverage
and detailed city lists in each region. The map
disc manual will be in your map DVD case when
the vehicle is delivered from the factory.
Installing the DVD Map Disc
When your vehicle is delivered from the factory,
the dealer may have installed the map DVD. If the
map DVD was not installed in your vehicle
when rst purchased, do the following:
1. Turn the ignition on.
2. With the vehicle in PARK (P), press and hold
the TILT key until a beep is heard. The
system’s faceplate will open.
3. If already loaded, the map DVD or a CD will
eject from the slot.
271