technical data CHEVROLET LOW CAB FORWARD 2018 User Guide

Chevrolet Low Cab Forward Owner Manual (GMNA-Localizing-U.S.-
11254764) - 2018 - crc - 12/5/16
Technical Data 339
Rotor thickness[Standard Value] 40.0 mm (1.575 in) 42.0 mm (1.654 in)
[Usable Limit] 37.0 mm (1.457 in) 39.0 mm (1.535 in)
Pad thickness [Standard Value] 13.0 mm (0.512 in) 13.0 mm (0.512 in)
[Usable Limit] 1.0 mm (0.04 in) 1.0 mm (0.04 in)
Service Brakes
Brake pedal free play Refer to Brakes0242.
Clearance between the brake pedal and the brake pedal
bracket (applied to the brake pedal)
Parking Brake
Lever effective stroke (Under pull force of approx. 147 N (15 kg/33 lb) 6 - 8 notches
Electrical System
Battery type [BCI size] (RC-CCA) x No. of units 31T (160 - 750) x 2
*7
Starter
12 V - 3.0 kw
Alternator 12 V - 140 amp
Tightening Torque
Oil pan drain plug 83.3Y(8.5 kgf m/61.0 lb ft)
Oil filter drain plug —

Chevrolet Low Cab Forward Owner Manual (GMNA-Localizing-U.S.-
11254764) - 2018 - crc - 12/5/16
340 Technical Data
Oil filter—
Oil filter cartridge 63.7 Y(6.5 kgf m/47.0 lb ft)
Remarks:
*1see Engine Oil 0223.
Remarks:*2see Engine Coolant 0231.
Remarks:*3see Automatic Transmission Fluid 0229.
Remarks:*4see Rear Axle (Gear Oil Viscosity Chart) 0249 orRear Axle (Oil Level Check) 0249.
Remarks:*5only for vehicles equipped with optional limited slip differential.
Remarks:*6The fuel tank capacity is stated on a metal plate attached to the fuel tank body. Only fill the tank to
95 percent of its capacity; this allows room for the expansion of the fuel.
Remarks:
*7larger capacity batteries 31 (180-930) × 2 can also be used. However, do not mix batteries of different
types and from different makers.

Chevrolet Low Cab Forward Owner Manual (GMNA-Localizing-U.S.-
11254764) - 2018 - crc - 12/5/16
Technical Data 341
Engine Drive Belt Routing
Fan Belt and Air Conditioning
Compressor Belt
See theMaintenance Schedule
0 303.
No. Name
1 Fan belt
2 Fan pulley
3 A/C belt
4 A/C compressor
5 Tension pulley No.
Name
6 Crank pulley
7 Alternator
If your air conditioning system is
functioning properly, it is not
necessary to remove and replace
the refrigerant or compressor oil.
. A V-ribbed belt is used for the
fan belt. This type of belt
requires the tension to be
adjusted more accurately than is
required with the conventional V
belt. Inappropriate tension could
cause the belt to make noise or
break. When the fan belt is
damaged, electricity is not
properly generated or becomes
a cause of engine overheating.
You must check the tension of
the fan belt carefully.
. Use dealer-certified genuine
parts when changing the
fan belt.
. Have the vehicle inspected and
serviced at your dealer. .
The air conditioning drive belt,
if equipped, must be adjusted
after fan belt adjustment. If the
belt is not adjusted properly, the
A/C belt may experience
excessive tension, and possible
premature failure.