tire size CHRYSLER VOYAGER 2020 Vehicle Warranty

Page 33 of 270

For Example Only:
Gauge reading of hot tire:................................ 32 psi (220 kPa)
If recommended cold inflation pressure is: ............. 30 psi (205 kPa)
Desired gauge reading of hot tire 30 + 4 psi = ........
34 psi (205 + 30 = 235 kPa)
Therefore: add 2 psi ....................................... (15 kPa)
BFGOODRICH TIRES
Check
coldpressure assoon aspossible, preferably within24hours.
“Bleeding” airfrom hottires could result inunderinflation. Usean
accurate tiregauge tocheck pressures. Neverallowchildren toinflate
or deflate tires.
TIREPRESSURE MONITORING SYSTEM(TPMS):
Yourvehicle maybeequipped withaTi re Pressure Monitoring System
(TPMS) thatisdesigned tomonitor thepressure oftires mounted onyour
vehicle andsends asignal tothe driver ifatire pressure fallsbelow a
predetermined level.ATPMS should notreplace monthly manual
pressure checksforallfour (4)tires andthespar e.
We recommend that
you manually monitorandcheck tirepressure inflationwithapressure
gauge.
Your tiresshould havetherecommended pressurelistedbyyour
vehicle’s manufacturer. Thisinformation canbefound inthe vehicle
owner ’s manualandoften onaplacard locatedinthe vehicle’s door
jamb, inside thefuel hatch, oron the glove compartment door.Ifyou
have a

 plus sizefitment thatrequires ahigher inflation pressure, yourtire
pressure monitoring systemwillrequire re-calibration tothe new infla-
tion pressure. Refertoyour tiredealer/installer ofplus sizetires for
proper inflation pressure.
We r

ecommend checkingairpressure onceeachmonth, andbefore along
trip. Whether youhave afull-sized ormini-spare, makesurethatitis
properly inflatedaswell. Ifthe TPMS generates impropermonitoring or
signals werecommend thatyouconsult yourowner ’s manualprovided
with your vehicle andfollow-up withyour vehicle’s manufacturer.
32

Page 38 of 270

The maximum load rating of your tires is molded on the tire sidewall. Do
not exceed this rating. Follow the loading instructions of the manufac-
turer of your vehicle and this will ensure that your tires are not
overloaded. Tires which are loaded beyond their maximum allowable
loads for the particular application will build up excessive heat that may
result in sudden tire destruction.
Do not exceed the gross axle weight rating for any axle on your vehicle.
TRAILER TOWING
If you anticipate towing a trailer, you should visit any BFGoodrich® tire
retailer for advice concerning the correct size tire and pressures. Tire size
and pressures will depend upon the type and size of trailer and hitch
utilized, but in no case must the maximum cold inflation pressure or tire
load rating be exceeded. Check the tire decal and the owner ’s manual
supplied by the manufacturer of your vehicle for further recommenda-
tions on trailer towing.
WHEEL ALIGNMENT AND BALANCING ARE IMPORTANT FOR
SAFETY AND MAXIMUM MILEAGE FROM YOUR TIRES CHECK
HOW YOUR TIRES ARE WEARING AT LEAST ONCE EACH
MONTH
If your tires are wearing unevenly, such as the inside shoulder of the tire
wearing faster than the rest of the tread, or if you detect excessive
vibration, your vehicle may be out of alignment or balance. These
conditions not only shorten the life of your tires but adversely affect the
handling characteristics of your vehicle, which could be dangerous. If
you detect irregular wear or vibration, have your alignment and balance
checked immediately. Tires which have been run underinflated will show
more wear on the shoulders than in the center of the tread.
TIRE MIXING
BFGoodrich® tires are radial tires and for best performance it is recom-
mended that the same size and type of tire be used on all four wheel
positions. Before mixing tires of different types in any configuration on
any vehicle, be sure to check the vehicle manufacturer ’s Owner‘s Manual
for its recommendations.
It is especially important to check the vehicle manufacturer ’s owner ’s
manual when mixing, matching or replacing tires on 4-wheel drive
vehicles, as this may require special precautions.
BFGOODRICH TIRES
37

Page 39 of 270

WhileAll-Season tiresaredesigned toprovide reliable
performance insome inter conditions, theuse offour
(4) inter tiresisrecommended foroptimum perfor-
mance. Tiresdesignated foruse insevere inter condi-
tions aremarked onatleast onesidewall withtheletter
“M” and “S” plus a pictograph of a mountain with a snowflake on it.
TIRE ROTATION AND REPLACEMENT
To obtain maximum tire wear, it may be necessary to rotate your tires. Refer
to your vehicle owner ’s manual for instructions on tire rotation. If you do
not have an owner‘s manual for your vehicle, BFGoodrich® recommends
rotating your tires every 6,000 to 8,000 miles (10,000 to 12,000 km).
Monthly inspection for tire wear is recommended. Your tires should be
rotated at the first sign of irregular wear, even if it occurs before 6,000
miles (10,000 km). This is true for all vehicles.
When rotating tires with a directional tread pattern, observe the arrows
molded on the sidewall which show the direction the tire should turn.
Care must be taken to maintain the proper turning direction.
Some Tire Pressure Monitoring systems (TPMS) may not recognize that a
tire has been moved to a different position on your vehicle. Make certain
that your TPMS system is reset, if necessary, so as to correctly identify the
location of each tire on your vehicle. Refer to your vehicle owner ’s
manual or your vehicle dealer.
Determine whether rotated tires require tire inflation adjustment as front
and rear position tire pressure may vary according to the vehicle manufac-
turer ’s specification due to the actual load on that wheel position. Some
vehicles may have different sized tires mounted on the front and rear axles,
and these different sized tires have rotation restrictions. Always check the
vehicle owner ’s manual for the proper rotation recommendations.
BFGOODRICH TIRES
BFGOODRICH® DOESNOTRECOMMEND MIXINGSELFSUPPORT-
ING STRUCTURE (SSS)TIRES WITH NON-SSS TIRESOTHER THAN
THE TEMPORARY USEOFTHE SPARE TIRE.
WINTER DRIVING
Ti re s which meettheRubber manufactures Association(RMA)definition
of snow tiresaremarked M/S,M&S. Onsuch tires, thisdesignation is
molded intothesidewall. Tireswithout thisnotation arenot recom-
mended forinter driving.
38

Page 40 of 270

BFGOODRICH TIRES
FULL-SIZESPARE
Full-size sparetires(nottemporary spares)ofthe same sizeandconstruc-
tion should beused inafive (5)tire rotation. Alwayschecktheinflation
pressure ofthe full-size spareimmediately beforeincorporating itinto
rotation. Followthevehicle manufacturer ’s recommendedpatternfor
rotation, orifnot available, seeaqualified tiretechnician.
REPLACEMENT OFTWO (2)

 TIRES
It is recommended thatallfour (4)tires arereplaced atthe same time.
However, whenever onlytwotires arereplaced, thenew ones should be
put onthe rear. The new tires, withdeeper tread,mayprovide bettergrip
and water evacuation inwet driving conditions.
CUSTOMIZATION OF TIRES, WHEELS, ORSUSPENSION ON
SUVS ANDLIGHT TRUCKS
Due totheir size,weight andhigher centerofgravity, vehicles suchas
SUVs andlight trucks donot have thesame handling characteristics as
automobiles. Becauseofthese differing characteristics, failuretooperate
your SUV/truck inaproper andsafe manner canincrease thelikelihood
of vehicle rollover. Modifications toyour SUV/truck tiresize, tir
etype,
wheels orsuspension canchange itshandling characteristics andfurther
increase thelikelihood ofvehicle rollover. Whether yourSUV/truck has
the original equipment configuration fortires, wheels andsuspension or
whether anyofthese items havebeenmodified, alwaysdrivesafely,
avoid sudden, sharpturnsorlane changes andobey alltraffic laws.
Failure to

 do somay result inloss ofvehicle controlleading toan accident
and serious injuryordeath.
TIRE ALTERATIONS
Do not make orallow tobe made anyalterations onyour tires.
Alterations mayprevent properperformance, leadingtotire damage
which canresult inan accident. Tireswhich become unserviceable dueto
alterations suchastruing, whitewall inlays,addition ofbalancing or
sealant liquids, orthe use oftire dressing containing petr

oleum distillates
are excluded fromwarranty coverage.
39

Page 42 of 270

reflect the tire size. The following one to four digits may be used at the
tire manufacturer ’s option as a descriptive code. The last three characters
are numbers identifying the week and year of manufacture. (Example:
“O25” means second week of the year of decade, eg.: 1995, 1985, etc.)
Tires produced after July 2000 have an additional digit to identify a given
decade. For example, 2800 means the tire was produced during the 28th
week of 2000; 0201 during the 2nd week of 2001. If the last digits of your
DOT number contain three numeric characters consult a qualified tire
technician to determine the year and decade of manufacture.
STORAGE
Tires contain waxes and emollients to protect their outer surfaces from
ozone and weather checking. As the tire rolls and flexes, the waxes and
emollients continually migrate to the surface, replenishing this protection
throughout the normal use of the tire. Consequently, when tires sit
outdoors, unused for long periods of time (a month or more) their
surfaces become dry and more susceptible to ozone and weather check-
ing and the casing becomes susceptible to flat spotting.
For this reason, tires should always be stored in a cool, dry, clean,
indoor environment. If storage is for one month or more, eliminate the
weight from the tires by raising the vehicle or by removing the tires
from the vehicle. Failure to store tires in accordance with these
instructions could result in damage to your tires or premature aging of
the tires and sudden tire failure.
When tires are stored, be sure they are placed away from sources of heat
and ozone such as hot pipes and electric generators. Be sure that surfaces
on which tires are stored are clean and free from grease, gasoline or other
substances which could deteriorate the rubber.(Tires exposed to these
materials during storage or driving could be subject to sudden failure.)
FOLLOW THESE MOUNTING RECOMMENDATIONS
Tire changing can be dangerous and must be done by professionally
trained persons using proper tools and procedures as specified by the
Rubber Manufacturers Association (RMA).
Your tires should be mounted on wheels of correct size and type and
which are in good, clean condition. Wheels that are bent, chipped, rusted
(steel wheels) or corroded (alloy wheels) may cause tire damage. The
inside of the tire must be free from foreign material. Have your retailer
check the wheels before mounting new tires. Mismatched tires and rims
BFGOODRICH TIRES
41

Page 43 of 270

can explode during mounting. Also, mismatched tires and rims can result
in dangerous tire failure on the road. If a tire is mounted by error on the
wrong-sized rim, do not remount it on the proper rim - scrap it. It may
have been damaged internally (which is not externally visible) by having
been dangerously stretched and could fail on the highway.
Old valves may leak. When new tubeless tires are mounted, have new
valves of the correct type installed. Tubeless tires must only be
mounted on wheels designed for tubeless tires i.e., wheels which have
safety humps or ledges.
It is recommended that you have your tires and wheels balanced. Tires
and wheels which are not balanced may cause steering difficulties, a
bumpy ride, and irregular tire wear.
Be sure that all your valves have suitable valve caps. The valve cap is
the primary seal against air loss.
SERVICE LIFE FOR PASSENGER CAR AND LIGHT TRUCK
TIRES INCLUDING SPARE TIRES
The following recommendation applies to passenger car and light truck
tires. Tires are composed of various types of material and rubber
compounds, having performance properties essential to the proper
functioning of the tire itself. These component properties evolve over
time. For each tire, this evolution depends upon many factors such as
weather, storage conditions, and conditions of use (load, speed, inflation
pressure, maintenance etc.) to which the tire is subjected throughout its
life. This service-related evolution varies widely so that accurately
predicting the serviceable life of any specific tire in advance is not
possible.
That it is why, in addition to regular inspections and inflation pressure
maintenance by consumers, it is recommended to have passenger car and
light truck tires, including spare tires, inspected regularly by a qualified
tire specialist, such as a tire dealer, who will assess the tire’s suitability for
continued service. Tires which have been in use for 5 years or more
should continue to be inspected by a specialist at least annually.
Consumers are strongly encouraged to be aware not only of their tires’
visual condition and inflation pressure but also of any change in dynamic
performance such as increased air loss, noise or vibration, which could be
an indication that the tires need to be removed from service to prevent
tire failure.
BFGOODRICH TIRES42

Page 45 of 270

If you see any damage to your tires or wheels, contact your local
participating BFGoodrich® tire retailer listed in the Yellow Pages, or
visit our web site listed below for dealer locations. If further assistance
is required, contact:
IN USAIN CANADA
877-788-8899 888-871-4444
or write:
Michelin North America, Inc.
Attention: Consumer Relations
Department
Post Office Box 19001
Greenville, SC 29602-9001 or write:
Michelin North America (Canada), Inc.
2500 Daniel-Johnson Blvd., Suite 500
Laval, Quebec
H7P 6G2
or visit:
www.bfgoodrichtires.com or visit:
www.bfgoodrichtires.ca
WARNING!
For safety and good performance, you must take care of your tires.
Follow the safety information and instructions contained in this
Owner ’s Manual.
Your Vehicle:Year
Make/Model
Your Tire Size:
Tire Purchase Date:
Recommended Pressures: Front
Rear
Correct tire pressure is very important. Proper inflation pressures may be
found in the vehicle owner ’s manual or on the vehicle tire information
placard. Check cold tire pressures at least once each month. For further
technical information on BFGoodrich® tires, consult a participating
BFGoodrich® tire retailer.
MNA, P.O. BOX 19026, GREENVILLE, SOUTH CAROLINA 29602-9026
AN EQUAL OPPORTUNITY EMPLOYER
BFGOODRICH TIRES
44

Page 56 of 270

Maximum Pressure Indicated on the Tire Sidewall:This is the maxi-
mum permissible inflation pressure for the tire only. The vehicle manu-
facturer ’s recommended tire pressures may be lower than, or the same as,
the maximum pressure indicated on the tire sidewall. The vehicle
manufacturer ’s specification of tire pressure is limited to your particular
vehicle and takes into account your vehicle’s load, ride, and handling
characteristics, among other criteria. Since there may be several possible
vehicle applications for a given tire size, a vehicle manufacturer may
choose a different inflation pressure specification for that same size tire
on a different vehicle. Therefore, always refer to the inflation pressure
specifications on the vehicle tire information placard and/or in your
vehicle owner ’s manual.
Different Tire Pressures for the Front and Rear Tires:For some vehicles,
the recommended front and rear inflation pressures may be different
(such as in the example shown in Figure 2). Make sure you take this into
account during inflation pressure checks and when rotating tires.
Pressure Loss: Tires can lose 1 psi (7 kPa) per month under normal
conditions and can lose 1 psi (7 kPa) for every 10° F (5.6° C) temperature
drop. A puncture, leaking valve, or other damage could also cause
inflation pressure loss. If a tire loses more than 2 psi (14 kPa) per month,
have it checked by a qualified tire service professional.
Figure 2: EXAMPLE—Tire Information Placard
BRIDGESTONE® - FIRESTONE®
55

Page 68 of 270

condition (including damage), wear, vehicle condition (including align-
ment), driving conditions, and duration at which the speed is sustained.
Use the following chart to compare the speed ratings of tires.
Speed
Symbol Speed Category*
mph km/h
M8 1130
Q9 9160
R 106 170
S 112 180
T 118 190
U 124 200
H 130 210
V 149 240
Z** >149 >240
W 168 270
Y 186 300
(Y)** >186
The tire’s speed rating designation appears on the tire sidewall with the
tire size. Examples:
P275/40ZR17 max > 149 mph (240 km/h)****
P275/40R17 93W max = 168 mph (270 km/h)
P275/40ZR17 93W max = 168 mph (270 km/h)
P275/40ZR17 93Y max = 186 mph (300 km/h)
P275/40ZR17 93(Y) max > 186 mph (300 km/h) ****
* In standardized laboratory tests that relate to highway speeds. Actual
tire speed and performance capability depend on factors such as inflation
pressure, load, tire condition, wear, and driving conditions.
** Any tire having a maximum speed capability above 149 mph
(240 km/h) may, at the tire manufacturer ’s discretion, include a “Z” in
the size designation (i.e. P275/40ZR17).
*** For tires having a maximum speed capability above 186 mph
(300 km/h), a “Z” must appear in the size designation and a “Y” marked
in brackets (as shown) in the service description.
**** Consult the tire manufacturer for maximum speed capability.
BRIDGESTONE® - FIRESTONE®
67

Page 70 of 270

If your spare is the same size, load rating, and type of tire as your road
tires, it should be included in the tire rotation process. For vehicles with
a “full-size” spare, the following rotation patterns may be used:
NOTE:
•Never include a “temporary use” spare tire in the rotation.
• Tires with directional tread patterns must be rotated so the direction of
revolution does not change; this may require demounting/mounting
the tires.
• Special attention should be given if your vehicle is equipped with a
Tire Pressure Monitoring System (TPMS). Rotation of your tires may
affect the system; consult your vehicle owner ’s manual or a qualified
tire service professional.
• Some vehicles may have different size tires/wheels on front and rear
which would restrict rotation. Always check and follow the vehicle
manufacturer ’s rotation recommendation.
• To use a full-size spare in the rotation pattern on vehicles with dual
rear wheels, consult your vehicle owner ’s manual for the recom-
mended procedures or consult the vehicle manufacturer.
BRIDGESTONE® - FIRESTONE®
69

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 ... 80 next >