tire size CHRYSLER VOYAGER 2020 Vehicle Warranty

YOUR SPARE TIRE
Consult your vehicle owner ’s manual for proper application of your
spare tire. Your car may be equipped with a “temporary use” spare tire;
this spare may differ in size and construction from the other tires on your
vehicle.
WARNING!
Check inflation pressure before use. Failure to have proper inflation
pressure when using your spare tire can result in serious personal
injury or death. See Tire Inflation Pressure in this manual.
WARNING!
Mounting a “temporary use” tire on a wheel which is not
specifically designed for it, or placing another type tire on a wheel
designated for temporary use can be dangerous. Your vehicle’s
handling characteristics can be seriously affected. You could have an
accident resulting in serious personal injury or death. Consult your
vehicle owner ’s manual for proper application of your “temporary
use” spare tire.
The spare tire in your vehicle is intended to be used as a spare when
needed. The spare tire carrier is not intended to be used for long term
storage, except for “temporary use” tires. If your spare is the same size,
load rating, and type of tire as your road tires, it should be included in the
tire rotation process; see “Radial Tire Rotation” in this manual for more
information.
The spare should be included in regular tire inspections and inflation
pressure checks. In addition, it should be replaced 10 years after date of
manufacture, regardless of condition or tread depth. For more informa-
tion, see the “Tire Damage, Inspection and Service Life” in this manual.
TIRE STORAGE
Tires should be stored indoors in a cool, dry place where water cannot
collect inside them. Tires should be placed away from electric
generators/motors and sources of heat such as hot pipes. Storage
surfaces should be clean and free of grease, gasoline or other substances
which can deteriorate the rubber.
BRIDGESTONE® - FIRESTONE®
70

SPECIAL SERVICE AND REPAIR ISSUES
Run-Flat Certified Retailers
Because of the advanced technology and design of RFT tires and the
required tire pressure monitoring systems (TPMS), Bridgestone Firestone
Run-Flat Certified Retailers are specially trained to sell and service RFT
tires.
Run-Flat Certified Retailers have the necessary equipment and are
specially trained to properly mount and demount RFT tires and to handle
TPMS devices.Conventional mounting equipment may irreparably
damage RFT tires and an improper repair is unsafe and will void the
Limited Warranty. Accordingly, it is important to go to a Bridgestone
Firestone Run-Flat Certified Retailer for tire maintenance and replace-
ment.
Call toll-free 1-877-BFS-4RFT or, 877-237-4738 or visit
www.bridgestonetire.comto locate the nearest Bridgestone Firestone
Run-Flat Certified Retailer.
Inspection after Run-Flat or Low Pressure Operation
Following run-flat or low tire pressure operation, or in the event of any
other tire damage or unusual condition, it is very important to obtain a
proper and complete tire evaluation as soon as possible.
Rotation
Follow the vehicle manufacturer ’s recommendations, or rotate every
5,000 miles per the recommendations in this manual (see “Radial Tire
Rotation”). In some cases, TPMS devices require reprogramming with
each tire rotation.
RFT Tire Replacement
Do not replace or mix RFT tires with conventional tires, unless on an
emergency/temporary basis. Conventional tires do not have run-flat
capability and the handling characteristics of the vehicle with these tires
may be different. If a conventional tire is used on an emergency/
temporary basis, verify that its size, load capacity, inflation pressure, and
speed rating specifications meet the requirements of the vehicle. Replace
any conventional tire with the proper RFT tire as soon as possible.
BRIDGESTONE® - FIRESTONE®
75

REFERENCE INFORMATION
TIRE SIDEWALL LABELING
A lot can be learned by reading the tire’s sidewall. The following figures
show typical information on the sidewall of passenger (Figure 3) and
light truck tires (Figure 4):
Tire Size, Load Range, Load Index, and Speed Symbol:
Example Tire Size Load Index SpeedSymbolLoad Range
Figure 3 P215/65R15 95 H-
Figure 4 LT235/85R16 114/111 QD
BRIDGESTONE® - FIRESTONE®
77

DOT Symbol and Tire Identification Number:The “DOT” symbol
constitutes a certification that the tire conforms to applicable U.S.
Department of Transportation motor vehicle safety standards (for tires).
Following the “DOT” symbol is the tire identification number, also
known as the DOT serial number or code. For example:
(a) DOT Symbol (d) Tire Manufacturer ’s Code
(b) Manufacture Plant Code (e) Week of Production (01-52)
(c) Tire Size Code (f) Year of Production (last two digits
of year)
BRIDGESTONE® - FIRESTONE®
* For
tires
produced
from
2000-on.
In
the
example
above,
the
tire
was
produced
in
the
18th
week
of
2000.
For
tires
produced
prior
to
2000,
there
is
one
digit
in
group
(f)
which
identifies
the
last
digit
of
the
year
of
production,
i.e.
“329”
would
likely
signify
the
32nd
week
of
1999,
but
could
possibly
signify
the
32nd
week
of
1989.
If
in
doubt,
consult
a
qualified
tire
service
professional.
The
DOT


symbol
and
tire
identification
number
can
be
found
on
at
least

one
sidewall
near
the
wheel.
The
other
sidewall
may
have
a
partial
serial

code
that
excludes
(e)
and
(f)
above.
Maximum
Load
and
Inflation:
The
maximum
load
and
maximum

inflation
pressure
is
marked
on


each
sidewall
in
metric
and
English
units.

For
example:
MAX
LOAD
685
kg
(1,510
lbs)
AT
240
kPa
(35
psi)
MAX
PRESS
NOTE:

The
load
and
inflation
values
marked
on
the
tire
sidewall
are

maximum
permissible
values
for
the
tire
only.
Never
assume
that
these

values


are
the
actual
maximum
load
capacity
or
recommended
tire

pressure
values
for
your
vehicle.
See
“Tire
Inflation
Pressure,”
“Tips
for

Safe
Tire
Inflation,”
and
“Tips
for
Safe
Loading”
in
this
manual.
78

Ply Composition and Materials:The actual number of plies in the
sidewall and tread area and the generic name(s) of their cord material(s)
are marked on at least one sidewall. For example:
• TREAD 2 PLY POLYESTER + 2 STEEL
• SIDEWALL 2 PLY POLYESTER
Radial: Radial ply tires will have the word radialon at least one
sidewall. An “R” in the tire size designation also indicates radial ply
construction.
Tubeless or Tube Type: Tires are marked as either “tubeless” or “tube
type,” whichever is applicable, on at least one sidewall.
UNIFORM TIRE QUALITY GRADING
The Uniform Tire Quality Grading (“UTQG”) standards are intended to
assist you in making an informed choice in your purchase of passenger
car tires by providing information indicating relative performance of
these tires in the areas of tread wear, wet braking traction (straight-
ahead), and temperature resistance. All passenger car tires must conform
to federal safety requirements in addition to these grades.
Treadwear
The treadwear grade is a comparative rating based on the wear rate of the
tire when tested under controlled conditions on a specified government
test course. For example, a tire graded 150 would wear one and one half
(1 1/2) times as well on the government course as a tire graded 100. The
relative performance of tires depends upon the actual conditions of their
use, however, and may depart significantly from the norm due to
variation in driving habits, service practices and differences in road
characteristics and climate.
Traction
The traction grades, from highest to lowest, are AA, A, B, and C. Those
grades represent the tire’s ability to stop on wet pavement as measured
under controlled conditions on specified government test surfaces of
asphalt and concrete. Warning: The traction grade assigned to a tire is
based on straight-ahead braking traction tests, and does not include
acceleration, cornering, hydroplaning, or peak traction characteristics.
BRIDGESTONE® - FIRESTONE®
79

FALKEN TIRE CORPORATION
FA L K E N
MADE BY SUMITOMO RUBBER INDUSTRIES
Congratulations!
Your new vehicle is fitted with high performance and high quality Falken
tires.
In order to guarantee that you receive the best performance and quality
from your new Falken tires, we recommend that you read and follow all
of the maintenance and safety tips provided in this document. We also
suggest that you have your Falken tires periodically inspected and
maintained by a qualified tire service professional.
A) TIRE CARE AND RECOMMENDATIONS
PROPER INFLATION AND FUEL ECONOMY
Ensure maximum performance and a long life from your tires by
checking the air pressures at least once a month and set them to the
vehicle manufacturer ’s recommended pressure(s) listed on the vehicle’s
tire placard or in your owner ’s manual. Always check and adjust your air
pressure when your tires are cold, preferably first thing in the morning
before driving. Never release air pressure from tires when they are hot.
Wait until the tires cool down and recheck, adding air or releasing as
required. Falken endorses the use of nitrogen in your tires because it
helps your tires maintain optimal pressure for longer periods of time and
reduces the amount of moisture inside of the tire and wheel assembly.
*Some plus size applications may require different air pressure(s) than
what is listed on your vehicle’s placard or owner ’s manual. In this case,
please consult your tire dealer or Falken Tire for proper inflation
pressure(s).
FALKEN TIRE CORPORATION
95

TIRE REPAIRS
In the event that you get a flat tire while driving, it is best to find a nearby,
safe place to stop and install your spare tire or call a tow truck. The less
distance that you drive on your low or flat tire, the better chances your
tire has of being repairable. Once you are able to get to your local
servicing tire dealer, have them dismount the tire from the rim and
thoroughly inspect the inside of the tire. It is important to know the
difference between a proper tire repair and an improper one because it
can be critical to you and your vehicle’s safety. An improper repair could
pose a safety threat to you and your family and could also affect your
tire’s manufacturer warranty. Here are some tips in determining if your
damaged tire can be properly repaired or not:
•Always have the tire removed from the wheel and inspected before
any repair is performed.
• Tires with less than 1.6 mm (2/32 of an inch) of tread should NOT be
repaired.
• Never repair a tire with a puncture larger than 6 mm (1/4 of an inch).
• Repairs should be limited to the tread area only.
• Repairs cannot overlap one another.
• A plug and patch or plug/patch combo should be used to effectively
repair a tire puncture.
• If anything seems questionable at any time during the repair process,
ask your service advisor for more details and/or call the tire manu-
facturer to make sure the tire’s warranty isn’t being voided.
TIRE MIX USAGE
WARNING!
Never mix tires of different size or construction and/or type on any
axle. (Except for temporary use as a spare tire.) Always refer to the
vehicle’s owner manual for proper tire fitments.
FALKEN TIRE CORPORATION
99

3.OWNER’S OBLIGATIONS
At least monthly, the vehicle owner(s) should check the tires’ air
pressure with a gauge and inflate to the recommended cold air
pressure level listed on the driver ’s door placard. Do not rely on car
servicers to perform the checks. The tires should be rotated at least
every 8,000km (5,000 miles) or earlier if uneven wear is occurring, and
proof of maintenance records should be kept. The owner(s) should
have the tires rebalanced if vibration is experienced, and the vehicle’s
alignment should be checked if uneven or rapid wear is occurring, or
when suggested by the vehicle’s manufacturer.
All warranty claims must be presented to an authorized Falken dealer
or participating car dealership. The owner(s) must present any sup-
porting maintenance records and documentation necessary to help
determine if the tire(s) in question are deemed covered by the limited
warranty or not.
4. LEGAL RIGHTS
All implied warranties, including warranties of merchantability and
fitness for a particular purpose shall be limited in duration to the above
period. To the extent permitted by law, Falken Tire Corporation shall not
be responsible for incidental or consequential damages, such as loss of
use of the tire or the vehicle on which it is used, inconvenience, or
commercial loss, some states do not allow limitations on how long an
implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights and you may
also have other rights, which vary from state to state. This is the only
express warranty applicable to Falken brand tires and supersedes the
terms of any previous warranty. Falken neither assumes nor authorizes
anyone to make or assume for it any other warranty.
C) UNDERSTANDING YOUR TIRES
TIRE SPEED SYMBOLS
Tires that are speed-rated are identified by the following letter symbols:
Q, S, T, U, H, V, W, Y, (Y), or (ZR). The Speed Rating’s Symbol can be
found as a part of the tire size designation (ex: 215/65HR16) or after the
load index immediately following the tire size designation (ex: 215/
65R16 97H). The Speed Rating’s Symbol indicates the maximum speed
that a tire can handle when properly inflated and loaded.
FALKEN TIRE CORPORATION
104

Speed Symbol Maximum Speed (KMH) Maximum Speed (MPH)Q 160 99S 180 112T 190 118
U 200 124
H 210 130 V 240 149
W 270 168 Y 300 186
(Y) Above 300 Above 186
ZR** Above 240 Above 149
NOTE:

**For
tires
with
speed
symbols
W
and
Y,
ZR
may
or
may
not
also
appear

within
the
size
designation.
For
tires
with
a
maximum
speed
above

186
MPH
a
ZR
must
appear
in
the
size
designation.
DATE OFTIRE MANUFACTURE
The
date
that
a
tire
was
manufactured
can
be
determined
by
examining

the
last
4
digits
of
the
12
digit
DOT
serial
code,
which
is
found
on
at
least

one
sidewall
of
a
tire.
For
tires
that
were
produced
after
the
year
2000,
the

last
4
digits
of
the
serial
code
will
identify
the
week
and
the
year
that
the

tire
was
manufactured.
If
the
last
4
digits
in
the
DOT
serial
code
were
to

read
“3013”
it
would
mean
that
the
tire
was
manufactured
the
30th
week

of
2013.
If
you
are
uncertain,
check
with
a
qualified
tire
service
profes-
sional
to
be
sure.
FALKEN TIRE CORPORATION
105

DOT Symbol And DOT Serial Code
The “DOT” symbol claims that the tire conforms to all applicable US
Department of Transportation motor vehicle safety standards for tires.
The identification/serial number follows the “DOT” symbol. Here is an
example of a DOT serial code:
(a) DOT Symbol(d) Tire Manufacturer ’s Code
(b) Manufacture Plant Code (e) Week of Production (01-52)
(c) Tire Size Code (f) Year of Production (last two digits
of year)
TIRE SIDEWALL LABELING
FALKEN TIRE CORPORATION
106