Citroen BERLINGO 2017 2.G Owner's Manual

269
Berlingo2VP_en_Chap10b_RD45_ed02-2016
RDS
The external environment (hills,
buildings, tunnels, basement car
parks, ...)  may   block   reception,  
i

ncluding   in   RDS   mode.   This   is   a  
n

ormal effect of the way in which radio
waves are transmitted and does not
indicate
  any   failure   of   the   audio   system.
Press the MENU
 

button.
Select " Audio functions ".
Press OK.
Select the " FM waveband
preferences "
  function.
Press OK. Select "
Activate RDS ".
Press OK , RDS is displayed in the
screen.
In " Radio " mode, press OK
 

directly   to   activate   /  
d

eactivate   RDS   mode.
RDS, if displayed, enables you to continue
listening to the same station by automatic
retuning
  to   alternative   frequencies.
 H

owever, in certain conditions, coverage
of an RDS station may not be assured
throughout the country as radio stations
do
  not   cover   100   %   of   the   territory.   This
 e

xplains the loss of reception of a station
that
  can   occur   during   a   journey.
Receiving TA messages
Press the TA button to activate or
deactivate   traffic   messages.
The TA (Traffic Announcement)
function gives priority to TA alert
messages.
  To   operate,   this   function  
n

eeds good reception of a radio station
transmitting   this   type   of   message.  
W

hen a traffic report is transmitted, the
current   audio   source   (Radio,   CD, ...)  
i

s interrupted automatically to play the
TA
 
message.   Normal   playback   of   the  
a

udio source resumes at the end of the
transmission   of   the   message.
Audio and Telematics
TECHNOLOGY on BOARD
10

270
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Media
USB port
This unit consists of a USB port
and  an   auxiliary   Jack   socket,  
d

epending   on   model.
Insert
  a   USB   memory   stick   into   the   USB   port  
o

r connect a USB peripheral device to the USB
port
  using   a   suitable   cable   (not   supplied).
The system creates playlists
(temporary
  memory),   which   can   take  
f

rom a few seconds to several minutes
on
 
the
 
first   connection.
Reducing the number of non-music
files and the number of folders reduces
this
 
waiting   time.   Playlists   are   updated  
e

very time the ignition is switched off or
a
 
USB
 
memory   stick   is   connected.
The
 
lists   are   memorised:   if   the   lists   are  
n

ot changed, the subsequent loading
time
 
is
 
reduced. Press and hold REFRESH LIST
to
display
  the   different   classifications.
Select by " Folder"
  /   "Artist "
  /  
"G

enre"
  /  
"Pl

aylist".
Press OK to select the classification
required, then press OK again to
confirm. Press REFRESH LIST
briefly to
display the previously selected
classification.
Navigate through the list using the
left
  /  
r
ight   and   up   /   down   buttons.
Confirm the selection by pressing
OK.
Press one of these buttons to gain
access
  to   the   previous   /   next   track   in  
t

he   list.
Press and hold one of the buttons for
fast
  for ward   or   rewind.
Press one of these buttons to
gain
  access   to   the   previous   /   next  
"Fo

lder"
  /   "Artist "
  /   "Genre "
  /  
"Pl

aylist"
  in   the   list.
To protect the system, do not use a
USB
  hub.
Audio and Telematics

 271
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Auxiliary socket (AUx)
Connect the portable device (MP3 player, …) to
the  auxiliary   Jack   socket   using   an   audio   cable  
(

not
 sup
plied).Press the SOURCE button several
times in succession and select AU
x.
F

irst   adjust   the   volume   on   your   portable   device  
(

to   a   high   level).   Then   adjust   the   volume   on  
y

our   audio   system.   Operation   of   controls   is   via  
t

he   portable   device.
Do not connect a device to both the
Jack
  auxiliary   socket   and   the   USB   port  
a

t   the   same   time.
CD player
Insert circular compact discs only.
S ome anti-pirating systems, on original discs
or CDs copied using a personal recorder, may
cause faults which are no reflection on the
quality
  of   the   vehicle's   player.
Insert a CD in the player, play begins
automatically. To play a disc which has already
been inserted, press the SOURCE

button several times in succession
and select CD .
Press one of the buttons to select a
track
  on   the   CD.
Press the LIST REFRESH button to
display
  the   list   of   tracks   on   the   CD.
Press and hold one of the buttons for
fast
  for ward   or   rewind.
Audio and Telematics
TECHNOLOGY on BOARD
10

272
Berlingo2VP_en_Chap10b_RD45_ed02-2016
The audio system will only play files with the
extension  ".mp3"   with   a   sampling   rate   of
 

22.05   KHz   or   44.1   KHz.   No   other   type   of   file  
(

.wma,   .mp4,   .m3u,   etc.)   can   be   played.
It is advisable to restrict file names to
20


characters without using special characters
(e.g.
  "   ?   ;   ù)   to   avoid   any   playing   or   displaying  
pro

blems.
In order to be able to play a recorded CDR or
CDRW,
  when   recording,   the   ISO   9660   level   1.2  
o

r   Joliet   file   format   is   recommended.
If the disc is recorded in another format, it may
not
  be   played   correctly.
It is recommended that the same recording
format is always used for an individual disc,
with as low a speed as possible (4x maximum)
for
  optimum   sound   quality.
In the particular case of a multi-session CD, the
Joliet
  format   is   recommended.
Information and advice
To play a disc which has already
been inserted, press the SOURCE
button several times in succession
and select CD .
Press one of the buttons to select a
folder
  on   the   CD.
Press one of the buttons to select a
track
  on   the   CD.
Press the LIST REFRESH button to
display the list of directories of the
MP3
  compilation.
Press and hold one of the buttons for
fast
  for ward   or   rewind   play.
Playing an MP3 CD
compilation
Insert an MP3 CD compilation in the player.
T he audio equipment searches for all of the
music
 
t
racks,  
w
hich  
m
ay  
t
ake  
a
nything  
b
etween  
a f

ew seconds and several tens of seconds,
before
  play   begins.
On a single disc, the CD player can
read up to 255 MP3 files spread over
8
  folder   levels.   However,   it   is   advisable  
t

o   keep   to   a   limit   of   two   levels   to   reduce  
t

he access time before the CD is
played.
While the CD is being played, the folder
structure
  is   not   followed.
All of the files are displayed on a single
level.
Audio and Telematics

 273
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Use only USB memory sticks formatted FAT32 (File   Allocation   Table).
It is recommended that you use
genuine Apple
® USB cables for correct
operation.
*

I
n certain cases, play of the audio files must
be
  initiated   from   the   keypad.
**
  If   the   telephone   supports   the   function.
Bluetooth® audio streaming
Streaming allows music files on the telephone
to  be   played   via   the   audio   system.
Connect
  the   telephone:   see   the   "Telephone "
section.
Select in the " Bluetooth: Telephone - Audio "
menu
  the   telephone   to   be   connected.
The audio system connects to a newly paired
telephone
 a

utomatically.
Control
  of   tracks   to   be   played   is   via   the   buttons  
o

n the audio system control panel and the
steering
  mounted   controls**.   The   contextual  
i

nformation   can   be   displayed   in   the   screen.
Activate the streaming source by
pressing the SOURCE
*
  button.
Connecting Apple® players
Connect the Apple® player to the USB port
using
 
a
 
suitable
 
cable   (not   supplied).
Play
 
starts
 
automatically.
Control
 
is
 
via
 
the
 
audio   system.
The classifications available are those of the
portable
 
device
 
connected   (artists   /   albums   /  
g

enres
 
/
 
playlists
 
/
 
audiobooks   /   podcasts).
The version of software in the audio system
may not be compatible with the generation of
your Apple
® player.
T
o protect the system, do not use a
USB
 
hub.
Audio and Telematics
TECHNOLOGY on BOARD
10

274
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Telephone
Pairing a Bluetooth® telephone
Screen C
(Available according to model and version)
As a safety measure and because they
require prolonged attention on the part
of the driver, the operations for pairing
of the Bluetooth
® mobile telephone with
the Bluetooth® hands-free system of
your audio equipment must be carried
out with the vehicle stationary and the
ignition
 o

n.
Go
 
to
 
www.citroen.co.uk   for   more   information  
(

compatibility,
 
more
 
help, ...).
Activate the telephone's Bluetooth
® function
and ensure that it is "visible to all" (telephone
configuration).
Press the MENU
 

button. In
  the   menu,   select:
- "
Bluetooth : Telephone - Audio "
- "
Bluetooth configuration "
- "
Perform a Bluetooth search "
A window is displayed with a message that a
search   is   in   progress.
The services available depend on
the   network,   the   SIM   card   and   the  
c

ompatibility of the Bluetooth
® device
used.
Consult your telephone's manual and
your operator to find out which services
are
 
available
 
to
 
you.
*
 
If
 
your
 
telephone
 
is
 
fully
 
compatible. The first 4 telephones recognised are displayed
in
 
this
 
window.
The " Telephone " menu permits access to the
following
 
functions
 
in
 
particular:
 
" Directory " *,
" Calls list ", "Consult the paired equipment ".Select the telephone to be connected from the
list.
  Only   one   telephone   can   be   connected   at  
a

  time.
A   virtual   keypad   is   displayed   in   the   screen:  
e

nter   a   code   with   at   least   4   digits.
Confirm by pressing OK.
A message in the screen indicates the telephone
chosen.   To   accept   the   pairing,   enter   the   same
 c

ode on the telephone, then confirm with OK.
If pairing fails, the number of attempts is not
limited.
A message that the pairing has been
successful
  appears   in   the   screen.
The automatic connection authorised is only
active
  after   the   telephone   has   been   configured.
The directory and the call list can be accessed
after
  the   necessary   synchronisation   period.
Audio and Telematics

 275
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Receiving a call
An incoming call is announced by a ring and a
superimposed  display   in   the   screen.
Select the YES tab on the display
using
  the   buttons.
Confirm by pressing OK.
Press this button at the steering
mounted
  controls   to   accept   the   call.
Making a call
From the "Bluetooth : Telephone - Audio "
menu.
Select " Manage the telephone call".
Select " Call".
Or
Select " Calls list ".
Or
Select " Directory ".
Press this button for more than two
seconds for access to your directory,
then
  navigate   using   the   thumbwheel.
Or
To
  dial   a   number,   use   your   telephone's   keypad,  
w

ith   the   vehicle   stationary.
Ending a call
During a call, press this button for
more  than   2   seconds.
Confirm with OK
 

to   end   the   call.
The system accesses the telephone's
contacts directory, depending on its
compatibility, and while it is connected
by Bluetooth
®.
With certain telephones connected by
Bluetooth
® you can send a contact to
the
 
directory   of   the   audio   system.
Contacts imported in this way are
saved in a permanent directory
visible to all, whatever the telephone
connected.
The menu for the directory is not
accessible
  if   it   is   empty.
Audio and Telematics
TECHNOLOGY on BOARD
10

276
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Screen menu map(s)
Radio- CD
REG mode
CD repeat
Shuffle play
Vehicle config*
R wiper in rev
Options
Diagnostic
RDS options
View
Abandon
1
2
3
3
1
2
2
2
2
1
2
Screen A
* The settings vary according to the trim level of the   vehicle.
Guide lighting
2
Units
Temperature: °Celsius
/ °Fahrenheit
Fuel consumption: KM/L - L/100 - MPG
1
2
2
Display adjust
Month
Day
Hour
Minutes Ye a r
12 H/24 H mode
Language
Italiano
Nederlands
Portuguès
Português do Brasil Français
Deutsch
Čeština English
Hr vatski Español
Magyar
1
2
2
2
2
2
2
2
1
2
2
2
2
2
2
2
2
2
2
Audio and Telematics

 277
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Screen C
Press the OK dial for access to
short-cut menus according to the
display
  on   the   screen.
activate
/ deactivate RDS
activate
/ deactivate REG mode
activate
/ deactivate radiotext
Radio
activate / deactivate Intro
CD / MP3 CD
activate / deactivate track repeat
(the entire current CD for CD, the entire
current folder for MP3 CD)
activate
/ deactivate random play
(the
entire current CD for CD, the entire
current folder for MP3 CD) activate
/ deactivate track repeat
(of the current   folder   /   artist   /   genre   /  p
laylist)
USB
activate / deactivate random play
( of the current   folder   /   artist   /   genre   /  
p

laylist)
1
1
1
1
1
1
1
1
Audio and Telematics
TECHNOLOGY on BOARD
10

278
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Screen C
Audio functions
Alternative frequencies (RDS)Activate   /   deactivate
FM
preferences
Regional mode (REG) Activate
  /   deactivate
Radio-text information (RDTXT) Activate
  /   deactivate
1
2
3
4
3
4
3
4
Play modesAlbum repeat (RPT)Activate
  /   deactivate
Track
  random   play   (RDM)
Activate
  /   deactivate2
3
4
3
4
Enter distance to destination1
1
1
2
2
2
Pressing the MENU  button   displays:
Audio functions Trip computerDistance: x miles
Vehicle diagnosis
Warning log
Systems activated or deactivated
State of systems
Audio and Telematics