audio Citroen BERLINGO FIRST DAG 2008 1.G Owner's Manual

5FAMILIARISATION-
INSTRUMENTS AND CONTROLS

12. Windscreen demisting vents.

13. Speaker (tweeter).

14. Side window demisting vents.

15. Side adjustable heating/
ventilation vents.

16. Passenger air bag disarming
control.

17. Upper glove box or passenger
air bag.

18. Lower glove box.

19. Audio RD3.

20. Heating/air conditioning controls.

21. Storage.

22. Removable ashtray.

23. Gear lever.

24. Lighter.

25. Handbrake.
26. Heated seats control.

27. Steering lock and ignition.

28. Steering wheel adjustment
control.

29. Bonnet release.

30. Fuse box.

31. Headlamp height adjustment.

32. Passenger's electric mirror
control.

1. Speed limiter/cruise control stalk.

2. Lights and direction indicators
stalk.

3. Driver's air bag.
Horn.

4. Instrument panel.

5. Audio equipment steering wheel
control.

6. Windscreen wipers/
wash-wipe stalk.

7. Central adjustable heating/
ventilation vents.

8. Hazard lights button.

9. Multifunction display or clock.

10. Central lockingbutton.

11. Controls:
- Electric windows.
- Demisting of rear door windows.
- Air conditioning.

AUDIO EQUIPMENT26 -
AUDIO RD3
Stalk movementFunction
1 - Press (behind) Increase volume
2 - Press (behind) Decrease volume
1 + 2 - Simultaneous press Sound cut-off (mute); restoring of the sound by pressing any button
3 - Press Automatic search of higher frequencies (radio) -Selection of the next track (CD)
4 - Press Automatic search of lower frequencies (radio) - Selection of the previous track (CD)
5 - Press the end Change of source (radio/CD)
6 - Rotation (clockwise) Selection of next station stored in memory (rad io)
7 - Rotation (anti-clockwise) Selection of previous station stored i n memory (radio)

27AUDIO EQUIPMENT-
Button Function
A Radio on/off.
B - Decrease volume.
C + Increase volume.
D RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
E TA Traffi c information priority on/off.
Press for more than 2 seconds: PTY function on/off.
H Selection of bass, treble, loudness, sound distribution and a
utomatic volume correction.
I Increase the setting of the functions associated with button
H .
J Decrease the setting of the functions associated with button
.
L Manual and automatic search of higher frequency.
Selection of next CD track and PTY (radio).
M MAN Manual/automatic operation of buttons L and N.
N Manual and automatic search of lower frequency.
Selection of previous CD track and PTY (radio).
Q CD Selection of CD.
Press for more than 2 seconds: shuffl e.
R Radio Selection of radio. Selection of FM1, FM2, FMast and AM waveban
ds.
Press for more than 2 seconds: automatic storing of stations in memory (autostore).
S
 Ejection of CD.
1 to 6 12 34 56 Selection of station stored in memory.
Press for more than 2 seconds: storing of a station in memory.

AUDIO EQUIPMENT28 - GENERAL FUNCTIONS AUDIO SETTINGS
Adjusting the loudness
This function automatically empha-sises bass and treble tones. Press button I or J to switch the function on or off.
On/off
With the ignition key in the accessories or ignition position, press button A to switch the set on or off.
The set can operate for 30 minutes without the vehicle ignition being switched on.
Anti-theft system
The audio system is coded in such a way that it can operate only on your vehicle. It would not function if fi tted to another vehicle.
The anti-theft system is automatic and requires no action on your part.
ADJUSTING THE VOLUME
Adjusting the bass
Adjusting the treble
When "TREB" is displayed, press button I or J to vary the setting.
- "TREB -9" for a minimum treble setting,
- "TREB 0" for a normal setting,
- "TREB +9" for a maximum treble setting.
Press button H several times in succession to access the bass(BASS) , treble (TREB) , loudness (LOUD) , fader (FAD) , balance (BAL) and automatic volume correction.
Exit from audio mode is automatic after a few seconds without pressing any button, or by pressing button Hafter confi guration of the automatic volume correction.
Note: bass and treble settings are specifi c to each source. It is possi-ble to set them differently for radio, cassette (RB3) , CD (RD3) and CD changer.
When "BASS" is dis-played, press button Ior J to vary the setting.
- "BASS -9" for a minimum bass setting,
- "BASS 0" for a normal setting,
- "BASS +9" for a maximum bass setting.
Press button C to in-crease the volume, or button B to decrease it.
Continuous pressure on buttons C and B allows a gradual adjustment of the volume.

29AUDIO EQUIPMENT-
RADIO
Adjusting the front/rear sound distribution (Fader)
When "FAD" is displayed, press but-ton I or J .
Button I increases the volume in the front.
Button J increases the volume in the rear.
Adjusting the right/left sound distribution (Balance)
When "BAL" is displayed, press but-ton I or J .
Button I increases the volume on the right-hand side.
Button J increases the volume on the left-hand side.
Automatic volume correction
This function enables the volume to be automatically adjusted depending on the level of noise produced by the speed of the vehicle.
Press buttons I or J to switch the function on or off.
Selecting radio mode
Press button R . Notes on radio reception
Your car radio is subject to pheno-mena which do not affect domestic radio sets. Both AM (MW/LW) and FM reception are subject to various forms of interference. This is no refl ection on the quality of the equipment, but is due to the nature of the signals and the way in which they are transmitted.
On MW/LW, interference may be noticed when passing under high voltage power lines or bridges, or in tunnels.
On FM, interference may be the re-sult of increasing distance from the transmitter, defl ection of the signals by obstacles (mountains, hills, buildings, etc.), or of being in an area which is not covered by a transmitter.
Selecting a waveband
Briefl y press button R to select the FM1, FM2, FMast and AM wave-bands.

29AUDIO EQUIPMENT-
RADIO
Adjusting the front/rear sound distribution (Fader)
When "FAD" is displayed, press but-ton I or J .
Button I increases the volume in the front.
Button J increases the volume in the rear.
Adjusting the right/left sound distribution (Balance)
When "BAL" is displayed, press but-ton I or J .
Button I increases the volume on the right-hand side.
Button J increases the volume on the left-hand side.
Automatic volume correction
This function enables the volume to be automatically adjusted depending on the level of noise produced by the speed of the vehicle.
Press buttons I or J to switch the function on or off.
Selecting radio mode
Press button R . Notes on radio reception
Your car radio is subject to pheno-mena which do not affect domestic radio sets. Both AM (MW/LW) and FM reception are subject to various forms of interference. This is no refl ection on the quality of the equipment, but is due to the nature of the signals and the way in which they are transmitted.
On MW/LW, interference may be noticed when passing under high voltage power lines or bridges, or in tunnels.
On FM, interference may be the re-sult of increasing distance from the transmitter, defl ection of the signals by obstacles (mountains, hills, buildings, etc.), or of being in an area which is not covered by a transmitter.
Selecting a waveband
Briefl y press button R to select the FM1, FM2, FMast and AM wave-bands.

AUDIO EQUIPMENT30 -
Briefl y press button L or N to search for the station immediately above or below. By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the fi rst sta-tion found as soon as the button is released.
If the TA traffi c information pro-gramme is selected, only stations broadcasting this type of programme are selected.
Searching for a station occurs fi rst in "LO" sensitivity (selection of the most powerful transmitters) during scan-ning of the waveband, then in "DX"sensitivity (selection of the weakest and most distant transmitters).
To make a direct search in "DX" sen-sitivity, press button L or N twice.
Manual station search
Press the "MAN" button.
Briefl y press button L or N to in-crease or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the fi rst sta-tion found as soon as the button is released.
Pressing the "MAN" button again returns you to automatic station search.
Manual storing of stations in the memory
Select the station required.
Press one of the buttons "1" to "6"for more than two seconds.
The sound stops then becomes audible again, confi rming that the station has been stored in the memory.
Automatic station search Automatic storing of FM stations in the memory (autostore)
Press and hold but-ton R for more than two seconds.
Your radio automatically stores the 6 stations with the strongest signal in FM . These stations are stored in the FMast waveband.
If it is not possible to fi nd 6 stations, the remaining memories are empty.
Recalling stations stored in the memory
For each waveband, briefl y press buttons "1" to "6" to recall the cor-responding station.

31AUDIO EQUIPMENT-
RDS
Traffi c information programme Regional following mode (REG)
RDS station following
The display indicates the name of the station selected. The radio is conti-nually searching for the station which has the best reception and which is transmitting the same programme.
Press the "TA" button to switch the function on or off.
The multi-function display will show:
- "TA" if the function is selected,
- "(TA)" if the function is selected but not available.
Any traffi c information fl ash will be given priority, whatever source you are listening to (radio, cassette, CD or CD changer).
If you wish to interrupt a message, press the "TA" button; this switches the function off.
Briefl y press the "RDS" button to switch the function on or off.
The multi-function display will show:
- "RDS" if the function is selected.
- "(RDS)" if the function is selected but not available.
When they are part of a network, certain stations broadcast re-gional programmes in the various areas they serve. With re-gional following mode you can keep listening to the same programme.
Press the "RDS" button for more than two seconds to switch the REGfunction on or off.
Using the RDS (Radio Data System) function on FM
Radio Data System allows you to continue listening to the same sta-tion, whatever frequency it is using for the region you are going through.
Note: the volume of traffi c informa-tion announcements is indepen-dent of the volume of normal radio listening. You can adjust it using the volume button. The setting will be stored and will be used when the next messages are broadcast.

AUDIO EQUIPMENT32 -
EON system
This connects stations which are part of the same network. It enables the broadcast of traffi c information, by a station that is part of the same net-work as the station to which you are listening.
This service is available when you have selected the TA traffi c information pro-TAgramme or the PTY function. PTY
PTY function
This allows you to listen to stations broad-casting a specifi c type of programme (news, culture, sport, rock, etc.).
To search for a PTY programme: PTY
With FM selected, press the "TA" but-ton for more than two seconds to switch this function on or off.
- select the PTY function, PTY
- briefl y press button L or N to scroll down the list of the various types of programmes offered.
- when the programme of your choice is displayed, keep button L or N pressed for more than two seconds to carry out an automatic search (after an automatic search the PTY function is switched off). PTY
In PTY mode the different types of PTYprogrammes can be stored in the memory. To do this, press the prese-lection buttons "1" to "6" for more than two seconds. Briefl y press the corresponding button to recall the type of programme stored in the memory.

33AUDIO EQUIPMENT-
Ejection of a disc
Shuffl e
When the CD player is selected, keep
button Q pressed for two seconds.
The tracks will be played in random
sequence. Pressing the button again
for Q two seconds returns you to nor-
mal play.
Shuffl e mode is de-activated each
time the audio system is switched off.
After insertion of a disc, printed face upwards, the player starts automatically.
If a disc is already inserted, press button Q.
COMPACT DISC
The use of copied compact
discs may cause faults.
Insert circular compact discs
only. Selecting a track
Press button L to select the next track.
Press button N to return to the start of the current track or to select the previous track.
Press button S to eject the disc from the player.
Accelerated play
Keep button L or N pressed for forwards or backwards accelerated play.
Accelerated play stops as soon as the button is released.
Selecting CD mode