Citroen BERLINGO FIRST RHD 2008.5 1.G Owners Manual

Page 91 of 115

89PRACTICAL INFORMATION-
Only use H4 bulbs manufac-
tured by: - GE/TUNGSRAM,
- PHILIPS,
- OSRAM,
to avoid damaging the headlamps.
These meet the anti-UV (ultra-violet)
specifi cations necessary for the cor-
rect operation and reliability of the
headlamps.
The headlamps are fi tted with a poly-
carbonate lens coated with a protec-
tive varnish. You are strongly advised
to avoid cleaning them using a dry or
abrasive cloth and using detergent
products or solvents.
Use a soft, damp cloth.

High pressure washing: when using
this type of washing on stubborn dirt, do
not persist on the headlamps, the lights
and their surround to avoid damaging
their coating and their seal. Direction indicator side repeaters
(WY 5 W amber)
- Push the transparent cover for-
wards or rearwards and release it.
- Turn the bulb holder a quarter turn.
- Change the bulb.
Amber coloured bulbs (di-
rection indicators and side
repeaters) must be replaced
by bulbs of identical specifi -
cation and colour. Rear lights

1. Fog lamp (P21 W).

2. Direction indicators (P21 W).

3. Reversing lights (P21 W).

4. Brake lights/Side lights
(P21/5 W).

High pressure washing: when using
this type of washing on stubborn dirt, do
not persist on the headlamps, the lights
and their surround to avoid damaging
their coating and their seal.

Page 92 of 115

89PRACTICAL INFORMATION-
Only use H4 bulbs manufac-
tured by: - GE/TUNGSRAM,
- PHILIPS,
- OSRAM,
to avoid damaging the headlamps.
These meet the anti-UV (ultra-violet)
specifi cations necessary for the cor-
rect operation and reliability of the
headlamps.
The headlamps are fi tted with a poly-
carbonate lens coated with a protec-
tive varnish. You are strongly advised
to avoid cleaning them using a dry or
abrasive cloth and using detergent
products or solvents.
Use a soft, damp cloth.

High pressure washing: when using
this type of washing on stubborn dirt, do
not persist on the headlamps, the lights
and their surround to avoid damaging
their coating and their seal. Direction indicator side repeaters
(WY 5 W amber)
- Push the transparent cover for-
wards or rearwards and release it.
- Turn the bulb holder a quarter turn.
- Change the bulb.
Amber coloured bulbs (di-
rection indicators and side
repeaters) must be replaced
by bulbs of identical specifi -
cation and colour. Rear lights

1. Fog lamp (P21 W).

2. Direction indicators (P21 W).

3. Reversing lights (P21 W).

4. Brake lights/Side lights
(P21/5 W).

High pressure washing: when using
this type of washing on stubborn dirt, do
not persist on the headlamps, the lights
and their surround to avoid damaging
their coating and their seal.

Page 93 of 115

90 - Third brake light
(rear left door) (W 5 W)

 Remove the housing cover by
pressing the tab A (round sec-
tion) at the end of the light.

 Pull the housing cover rearwards.

 Squeeze the two tabs B to remove
the bulb holder.

 Pull the faulty bulb and change it.
To refi t, proceed in the reverse order.
- Open the rear door.
- Unscrew the nut
A .
- Push the light unit gently towards the interior of the vehicle to unclip
the two side retaining clips,
- Remove the light unit and discon- nect it.
- Unclip the bulb holder by pressing the tabs B ,
- Change the faulty bulb. Number plate lights (W 5 W)

 Insert a thin screwdriver into one
of the external holes of the lens.

 Push it outwards to unclip it.

 Remove the lens.

 Change the faulty bulb.

Page 94 of 115

91PRACTICAL INFORMATION-
Removing and fi tting a fuse
Before changing a fuse, the cause
of the fault must be found and reme-
died. The fuse numbers are indicated
on the fuse box.
Use the pliers B .
CHANGING A FUSE
The fuse boxes are located under
the fascia and in the engine compart-
ment.
Fascia fuse box
Unclip the cover to gain access to the
fuses.
The spare fuses and the pliers B are
secured on the inside of the cover A .
Correct

Incorrect

Pliers B

Always replace a faulty fuse with a fuse
of the same rating (two fuse types ac-
cording to manufacturer - see images).

Page 95 of 115

91PRACTICAL INFORMATION-
Removing and fi tting a fuse
Before changing a fuse, the cause
of the fault must be found and reme-
died. The fuse numbers are indicated
on the fuse box.
Use the pliers B .
CHANGING A FUSE
The fuse boxes are located under
the fascia and in the engine compart-
ment.
Fascia fuse box
Unclip the cover to gain access to the
fuses.
The spare fuses and the pliers B are
secured on the inside of the cover A .
Correct

Incorrect

Pliers B

Always replace a faulty fuse with a fuse
of the same rating (two fuse types ac-
cording to manufacturer - see images).

Page 96 of 115

PRACTICAL INFORMATION92 -
Fuse
N° Rating Functions

1 15 A Rear wiper.

4 20 A Multi-function display - Instrument panel - Audio
equipment - Steering wheel controls.

5 - Not used.

6 10 A Diagnostic socket.

7 - Not used.

9 30 A Heated seats.

10 40 A Rear windows and mirrors demisting.

11 - Not used.

12 30 A Front electric windows.

14 10 A Engine fuse box - Steering wheel controls.

15 15 A Instrument panel - Multi-function display -
Audio equipment.

16 30 A Locking/unlocking controls for doors, bonnet and
boot.

20 10 A Right-hand brake light.

21 15 A Left-hand brake light.

22 20 A Front courtesy light - Map reading light - Lighter -
Electric mirror.

Page 97 of 115

93PRACTICAL INFORMATION-
The electrical circuit of your vehicle is designed to operate with standard or optional equipment.
Before installing other electrical equipment or accessories in you r vehicle, consult a CITROËN dealer.
Some electrical accessories or the way in which they are fi tted may have an adverse effect on the operation of your
vehicle (its electronic control circuits, the audio circuit and the electrical charging circuit).
CITROËN declines any responsibility for expenses incurred throug h the repair of your vehicle or for any malfunctions
resulting from the installation of auxiliary accessories, not supp lied and not recommended by CITROËN and not installed in
accordance with it’s instructions, in particular for any equipment the power consumption of which exceeds 10 milliamps.
The maxi fuses provide additional protection for the electrica l systems. Any work on these fuses must be carried out by a
CITROËN dealer.

Page 98 of 115

PRACTICAL INFORMATION94 -
Fuse N° Rating Functions

1 10 A Pre-heat unit (diesel) - Brake and clutch switches -
Reversing lights.

2 15 A Fuel pump.

3 10 A ABS control unit.

4 10 A Engine control unit.

5 - Not used.

6 15 A Front fog lamps.

7 20 A Headlamp wash pump.

8 20 A Fan assembly relay - Engine control unit.

9 15 A Left-hand dipped beam.

10 15 A Right-hand dipped beam.

11 10 A Left-hand main beam.

12 10 A Right-hand main beam.

13 15 A Horn.

14 10 A Front and rear windscreen wash pumps.

15 30 A Oxygen sensor - Air fl ow sensor.

16 30 A Air pump relay.

17 30 A Front windscreen wiper.

18 40 A Air conditioning fan.
Engine compartment fuse box
To gain access to the box in the engine
compartment (next to the battery), un-
clip the cover.
After carrying out work, close the
cover very carefully.

Page 99 of 115

95PRACTICAL INFORMATION-
ECONOMY MODE FUNCTION
After the engine has stopped, with
the key in the "accessories" position,
certain functions (windscreen wiper,
electric windows, courtesy lights,
audio equipment, etc.) can only be
used for a combined duration of ap-
proximately thirty minutes, to prevent
discharging the battery.
Once the thirty minutes are over, a
switching to economy mode mes-
sage appears on the multi-function
display and the active functions are
put on standby.
These functions are reactivated au-
tomatically next time the vehicle is
driven.
In order to resume the use of these
functions immediately, the engine
must be started and left to run for a
few minutes.
The time available to you will then be
double the duration for which the en-
gine is left running. However, this period
will always be between fi ve and thirty
minutes.
BATTERY

It is advisable to disconnect the
battery if the vehicle is not to be
used for a period of more than
one month.
Before disconnecting the bat-
tery, you must wait 2 minutes
after switching off the ignition.
Never disconnect a terminal
when the engine is running.
Never charge a battery without fi rst
disconnecting the terminals.
Close the windows and the roof be-
fore disconnecting the battery.
After every reconnection of the bat-
tery, switch on the ignition and wait
1 minute before starting to allow the
electronic systems to be initialised. If
slight diffi culties are experienced af-
ter this, please contact a CITROËN
dealer.
A fl at battery prevents the
engine from starting.
To start the vehicle from
another battery:
- Connect the red cable to the positive
(+) terminals of the two batteries,
- Connect one end of the green or black cable to the negative (-) ter-
minal of the slave battery,
- Connect the other end of the green or black cable to an earth
point on the broken down vehicle
as far as possible from the battery
(for example, right-hand engine
mounting).
Operate the starter, let the engine run.
Wait for the engine to return to idle,
then disconnect the cables.
To charge the battery using a
battery charger:
- Disconnect the battery,
- Follow the instructions for use
given by the battery charger man-
ufacturer,
- Reconnect starting with the nega- tive (-) terminal,
- Check that the terminals and connectors are clean. If they are
covered with sulphate (white or
greenish deposit), disconnect
them and clean them.

Page 100 of 115

PRACTICAL INFORMATION96 - Making the connections
A1: -
A2: - Digital control (manufacturer)
A3: - Digital control (manufacturer)
A4: - Audio equipment multiplexing
(manufacturer)
A5: -
A6: (+ve) Accessories
A7: (+ve) Permanent
A8: (-ve) Earth
B1: (+)
B2: (-)
B3: (+) Front right speaker and tweeter
B4: (-) Front right speaker and tweeter
B5: (+) Front left speaker and tweeter
B6: (-) Front left speaker and tweeter
B7: (+)
B8: (-)
FITTING SPEAKERS
The factory-fi tted equipment allows
the fi tting of:
- 35 mm diameter tweeters in the fascia,
- 165 mm diameter speakers in the front doors.
FITTING AUDIO EQUIPMENT
Your vehicle is equipped with certain
factory-fi tted audio equipment:
- roof aerial,
- coaxial aerial cable,
- basic interference suppression,
- supply to front speakers and tweeters,
- two 8-way connectors.
Contact a CITROËN dealer
before fi tting audio equipment
or speakers in your vehicle.

Page:   < prev 1-10 ... 51-60 61-70 71-80 81-90 91-100 101-110 111-120 next >