ignition Citroen BERLINGO FIRST RHD 2008.5 1.G Owner's Manual

Page 2 of 115

5FAMILIARISATION-
INSTRUMENTS AND CONTROLS

12. Windscreen wash-wipe stalk.

13. Audio equipment steering
wheel control.

14. Steering lock and ignition.

15. Fuse box.

16. Passenger air bag disarming
control.

17. Alarm.

18. Steering wheel adjustment
control.

19. Passenger's electric mirror
control.

20. Headlamp height adjustment.

21. Heated seats control.

22. Handbrake.

23. Lighter.

24. Removable ashtray.

25. Gear lever.
26. Storage.

27. Heating/air conditioning controls.

28. Audio RD3.

29. Lower glove box.

30. Upper glove box or passenger
air bag.

31. Bonnet release.

32. Side adjustable heating/
ventilation vents.

33. Side window de-icing/
demisting vents.

1. Speaker (tweeter).

2. Windscreen demisting vents.

3. Controls:
- Electric windows.
- Demisting of rear door windows.
- Air conditioning.

4. Central locking button.

5. Multifunction display or clock.

6. Hazard lights button.

7. Central adjustable heating/
ventilation vents.

8. Lights and direction indicators
stalk.

9. Speed limiter/cruise control.

10. Instrument panel.

11. Driver's air bag
Horn.

Page 3 of 115

FAMILIARISATION6 -
STARTING The remote control
THE KEYS
The keys allow you to switch on the
ignition and operate the passenger
air bag disarming switch, as well as
to independently operate the locks
on the doors and the fuel fi ller cap. Unlocking
Press button
B to unlock the vehicle.
This is confi rmed by rapid fl ashing of
the direction indicators.
Locating the vehicle
To locate your vehicle, previously
locked, in a car park:

 press button A , the courtesy lights
come on and the direction indica-
tors fl ash for a few seconds.

 52
Locking
Press button
A to lock the vehicle.
This is confi rmed by fi xed lighting of
the direction indicators for approxi-
mately two seconds. STOP position (S):
The ignition is off.
To release the steering, turn the
steering wheel slightly while turning
the key, without forcing it.
Accessories position (A):
The ignition is off but the accessories
can be used.
On position (M):
The ignition is on.
Starting position (D):
Operates the starter.
Release the key when the engine
has started. Never operate the starter
while the engine is running.
Central locking
From the front doors, the keys allow
you to lock and unlock all of the doors.
If one of the doors is open, it is impos-
sible to operate the central locking.

The remote control performs the
same functions at a distance.

Page 6 of 115

9FAMILIARISATION-
AIR BAGS
Disarming the passenger air bag

 With the ignition off , insert the
ignition key into the passenger
air bag switch 1 and turn it to the

"OFF" position.

 As soon as you remove the child
seat, turn the air bag switch to the

"ON" position to activate the air
bag again.
Disarming check With the ignition switched
on (2 nd notch), illumina-
tion of this warning light
indicates that the passenger
air bag is disarmed (switch
in the "OFF" position).
The warning light remains on throughout
the duration of disarming.

 78
Front air bags
These are folded in the centre of the
steering wheel for the driver and in
the fascia for the front passenger.
They are deployed simultaneously,
except in cases where the passenger
air bag is disarmed.
Side air bags are incorporated into
the front seat back frame, on the
door side.
They are deployed independently of
each other, on whichever side the
collision occurs.
Precautions regarding the
passenger air bag

 disarm the air bag if you install a
rear-facing child seat,

 activate the air bag for an adult
passenger.

 77 Side air bags

Page 15 of 115

19INSTRUMENTS, CONTROLS and DISPLAYS-
INSTRUMENTS AND CONTROLS

A permanently lit warning light
or one fl ashing, with the engine
running, indicates an operating
fault of the unit concerned. The
illumination of certain warning
lights may be accompanied by an
audible signal and a message on
the display. Do not ignore this war-
ning: consult a CITROËN dealer
as soon as possible.

If the central STOP warning light
comes on when you are driving,
stop your vehicle immediately,
where it is safe to do so.
Central (STOP)
warning light
Linked to the warning
lights:
- ''engine oil pressure and tempera- ture'',
- ''low coolant level'',
- 'handbrake'',
- ''low brake fl uid level'',
- ''electronic brake force distribution system fault''.
Linked with the "coolant temperature"
indicator.

You must stop if the light fl ashes
with the engine running.
Consult a CITROËN dealer. Engine oil pressure
and temperature
warning light
Linked to the central (STOP) warning
light.

You must stop.
This warning light indicates one of
the following:
- insuffi cient oil pressure indicated by the message "Oil pressure
insuffi cient" on the display.
- a lack of oil in the lubrication circuit. Top up the level.
- an oil temperature which is too high. To lower the oil temperature, reduce
your speed.
Lighting of the warning light is acco-
mpanied by an audible signal.
Consult a CITROËN dealer.
Low engine coolant
level warning light
Linked to the central (STOP)
warning light.
This comes on for a few seconds
when the ignition is switched on.
Lighting of this warning light is acco-
mpanied by an audible signal and the
message "Top up engine fl uid level"
on the display.

You must stop.
Wait for the engine to cool before
topping up the level.
The cooling circuit is pressurised. Handbrake, low
brake fluid level and
Electronic Brake Force
Distribution system
fault warning light
Linked to the central (STOP) warning
light.
This comes on each time the ignition
is switched on.
Lighting of this warning light is acco-
mpanied by an audible signal and a
message on the display indicating
the cause of the warning:
- "Handbrake on", if the handbrake
is applied or not fully released.
- "Brake fl uid level low" if there is
an excessive drop in brake fl uid
level (if the warning light remains
on even when the handbrake is
released).
- "Braking fault" is displayed to-
gether with the ABS warning
light, indicating a malfunction of
the Electronic Brake Force Distri-
bution system. You must stop .
Consult a CITROËN dealer.
In the event of breakdown and to
pre-
vent any risk of burns, unscrew the
cap by two turns to allow the pressure
to drop.
When the pressure has dropped, re-
move the cap and top up the level.
Consult a CITROËN dealer.

Page 16 of 115

INSTRUMENTS, CONTROLS and DISPLAYS20 - Battery charge warning
light
This comes on for a few se-
conds when the ignition is
switched on. Lighting of this war ning
light, when the engine is running,
acco mpanied by an audible signal
and the message "Battery charge
fault" on the display, indicates one of
the following:
- faulty operation of the charging circuit,
- slack battery or starter terminals,
- a cut or slack alternator belt,
- an alternator failure.
Consult a CITROËN dealer. Emission control
system warning light
This comes on for a few sec-
onds each time the ignition is
switched on.
If it comes on with the engine running,
accompanied by an audible signal
and the message on the display:
- "Antipollution fault", this indi-
cates a failure of the emission
control system
- "Catalytic converter fault", this
indicates a malfunction of the inje-
ction or ignition system. There is
a risk of damage to the catalytic
converter (petrol engine only).
Consult a CITROËN dealer.
Diesel engine pre-heat
warning light
Wait until the warning light
goes out before starting the
engine.
If the temperature is high enough,
the warning light comes on for less
than one second. You can start the
engine without waiting. Low fuel level
warning light
This comes on for a few
seconds when the igni-
tion is switched on.
When the ignition is on, it is acco-
mpanied by an audible signal and
the message "Fuel level low" on the
display.
If it fl ashes with the fuel gauge needle
in the lowest position, when the igni-
tion is on, this indicates a malfunction
of the fuel gauge.
When this warning light fi rst comes
on, you have enough fuel left to drive

approximately 30 miles (50 km) .
Capacity of the tank:
- approximately 55 litres for petrol engines,
- approximately 60 litres for Diesel engines.
Water in diesel filter
indicator *
There is a risk of damage to
the injection system.
Consult a CITROËN dealer as soon
as possible.
Anti-lock braking
system (ABS) warning
light
This comes on for a few seconds each
time the ignition is switched on.
If the warning light remains on or
comes on above 8 mph (12 km/h),
this indicates an ABS malfunction.
However, the vehicle retains conven-
tional servo-assisted braking.
Lighting of this warning light, acco-
mpanied by an audible signal and the
message "ABS fault" on the display,
indicates an ABS fault.
Consult a CITROËN dealer.
* According to country.

Page 17 of 115

21INSTRUMENTS, CONTROLS and DISPLAYS-
Seat belt not fastened
warning light *
When the ignition is switched
on, this indicator light comes
on if the driver has not fastened his
seat belt.
Above 12 mph (20 km/h), the warn-
ing light fl ashes for two minutes.
Once the two minutes have elapsed,
the warning light remains on until the
driver fastens his seat belt. Coolant temperature indicator
- needle in zone (A) , the tempera-
ture is correct,
- needle in zone (B) , the tempera-
ture is too high. The central STOP
warning light fl ashes, accompa-
nied by an audible signal and the
message "Engine coolant temp.
too high" on the display.

You must stop.
Consult a CITROËN dealer.
* According to country. Passenger air bag
disarmed warning
light *
Lighting of this warning light is acco-
mpanied by the message "Passenger
air bag deactivated" on the display.
If the passenger air bag is disarmed,
the warning light comes on when the
ignition is switched on and it remains
on.
Always consult a CITROËN dealer if
the warning light fl ashes. Front and side air bags
warning light
This comes on for a few se-
conds when the ignition is
switched on.
With the engine running, illumination
of this warning light accompanied by
an audible signal and the message

"Air bag fault" on the multifunction
display, indicates a fault in the air
bags.
Consult a CITROËN dealer.

Page 18 of 115

21INSTRUMENTS, CONTROLS and DISPLAYS-
Seat belt not fastened
warning light *
When the ignition is switched
on, this indicator light comes
on if the driver has not fastened his
seat belt.
Above 12 mph (20 km/h), the warn-
ing light fl ashes for two minutes.
Once the two minutes have elapsed,
the warning light remains on until the
driver fastens his seat belt. Coolant temperature indicator
- needle in zone (A) , the tempera-
ture is correct,
- needle in zone (B) , the tempera-
ture is too high. The central STOP
warning light fl ashes, accompa-
nied by an audible signal and the
message "Engine coolant temp.
too high" on the display.

You must stop.
Consult a CITROËN dealer.
* According to country. Passenger air bag
disarmed warning
light *
Lighting of this warning light is acco-
mpanied by the message "Passenger
air bag deactivated" on the display.
If the passenger air bag is disarmed,
the warning light comes on when the
ignition is switched on and it remains
on.
Always consult a CITROËN dealer if
the warning light fl ashes. Front and side air bags
warning light
This comes on for a few se-
conds when the ignition is
switched on.
With the engine running, illumination
of this warning light accompanied by
an audible signal and the message

"Air bag fault" on the multifunction
display, indicates a fault in the air
bags.
Consult a CITROËN dealer.

Page 19 of 115

INSTRUMENTS, CONTROLS and DISPLAYS22 - Service indicator
This is a visual reminder of when the
next service is due. This service is to
be carried out according to the manu-
facturer's servicing schedule. 5 seconds after the ignition is switched
on, the total distance recorder resumes
normal operation and the display shows
the total or trip di stances.
The distance remaining before the next
service is less than 500 miles (1,000 km).

Example: 400 miles (900 km) remain
before the next service is due.
When switching on the ignition and
for 5 seconds, the display shows:
5 seconds after the ignition is switched
on, the total distance recorder resumes
normal operation and the symbol re-
mains lit.
This indicates that a service should
be carried out shortly. The display
shows the total or trip distances. The service is overdue.
Each time the ignition is switched on
and for 5 seconds, the symbol and
the excess distance fl ash.

Example: the service is overdue by
300 miles/km. The service should be
carried out very shortly.
When the ignition is switched on and
for 5 seconds, the display shows:
5 seconds after the ignition is switched
on, the total distance recorder resumes
normal operation and the symbol re-
mains lit. The display shows the total or
trip distances.

Note: the spanner lights if the two-year
interval has been exceeded.
INSTRUMENT PANEL DISPLAY
After switching on the ignition, three
functions are shown in succession:
- service indicator,
- engine oil level indicator,
- total distance recorder/total and trip distances.

Note
: the total and trip distances are
displayed for 30 seconds when the
ignition is switched off, on opening
the driver's door, as well as on lock-
ing and unlocking the vehicle.

Example: 4,800 miles/km remain be-
fore the next service is due. When the
ignition comes on and for 5 seconds
the display shows:
Operation
As soon as the ignition is switched
on and for 5 seconds, the spanner
symbolising ''service operation'' is lit.
The trip recorder display shows the
distance remaining (in round fi gures)
before the next service.

Page 20 of 115

23INSTRUMENTS, CONTROLS and DISPLAYS-
Engine oil level indicator
When the ignition is switched on,
the engine oil level is indicated for
approximately 10 seconds, after the
service information.
Flashing of the six squares and dis-
playing of "max" indicate a surplus of
oil which could damage the engine.
If the surplus of oil is confi rmed by
a check using the dipstick, contact a
CITROËN dealer without delay.
Your CITROËN dealer carries out
this operation after each service.
The reset procedure is as follows:
- Switch off the ignition.
- Press and hold button
1 .
- Switch on the ignition.
The display begins a 10 second count-
down.
-
Keep button 1 pressed for 10 seconds.
The display shows [= 0] and the span-
ner disappears.
Flashing of the six segments and dis-
playing of "min" indicate a lack of oil
which could damage the engine.
If the lack of oil is confi rmed by a
check using the dipstick, it is essential
that the level is topped up. Flashing of the six segments indi-
cates a malfunction of the oil level
indicator.
There is a risk of damage to the engine.
Consult a CITROËN dealer.

The level read on the dipstick or on
the indicator will only be correct if
the vehicle is on level ground and
the engine has been off for more
than 15 minutes.
Resetting the service indicator
Surplus of oil
Lack of oil Oil level indicator fault

Page 25 of 115

AUDIO EQUIPMENT28 - GENERAL FUNCTIONS AUDIO SETTINGS
Adjusting the loudness
This function automatically empha-
sises bass and treble tones. Press
button I or J to switch the function on
or off.
On/off
With the ignition key
in the accessories or
ignition position, press
button
A to switch the
set on or off.

The set can oper-
ate for 30 minutes
without the vehicle ignition being
switched on.
Anti-theft system
The audio system is coded in such a
way that it can operate only on your
vehicle. It would not function if fi tted
to another vehicle.

The anti-theft system is automatic
and requires no action on your
part.
ADJUSTING THE VOLUME Adjusting the bass
Adjusting the treble
When
"TREB" is displayed, press
button I or J to vary the setting.
- "TREB -9" for a minimum treble
setting,
- "TREB 0" for a normal setting,
- "TREB +9" for a maximum treble
setting.
Press button
H several
times in succession
to access the bass

(BASS) , treble (TREB) ,
loudness (LOUD) ,
fader (FAD) , balance

(BAL) and automatic
volume correction.
Exit from audio mode is automatic af-
ter a few seconds without pressing any
button, or by pressing button H after
confi guration of the automatic volume
correction.

Note: bass and treble settings are
specifi c to each source. It is possible to
set them differently for radio, cassette

(RB3) , CD (RD3) and CD changer. When
"BASS" is dis-
played, press button

I or J to vary the set-
ting.
- "BASS -9" for a
minimum bass set-
ting,
- "BASS 0" for a nor-
mal setting,
- "BASS +9" for a maximum bass
setting.
Press button C to in-
crease the volume, or
button B to decrease it.
Continuous pressure
on buttons C and B al-
lows a gradual adjust-
ment of the volume.

Page:   1-10 11-20 21-30 next >