height adjustment Citroen BERLINGO FIRST RHD 2009 1.G Owner's Manual

5FAMILIARISATION-
INSTRUMENTS AND CONTROLS

12. Windscreen wash-wipe stalk.

13. Audio equipment steering
wheel control.

14. Steering lock and ignition.

15. Fuse box.

16. Passenger air bag disarming
control.

17. Alarm.

18. Steering wheel adjustment
control.

19. Passenger's electric mirror
control.

20. Headlamp height adjustment.

21. Heated seats control.

22. Handbrake.

23. Lighter.

24. Removable ashtray.

25. Gear lever.
26. Storage.

27. Heating/air conditioning controls.

28. Audio RD3.

29. Lower glove box.

30. Upper glove box or passenger
air bag.

31. Bonnet release.

32. Side adjustable heating/
ventilation vents.

33. Side window de-icing/
demisting vents.

1. Speaker (tweeter).

2. Windscreen demisting vents.

3. Controls:
- Electric windows.
- Demisting of rear door windows.
- Air conditioning.

4. Central locking button.

5. Multifunction display or clock.

6. Hazard lights button.

7. Central adjustable heating/
ventilation vents.

8. Lights and direction indicators
stalk.

9. Speed limiter/cruise control.

10. Instrument panel.

11. Driver's air bag
Horn.

FAMILIARISATION8 -
FRONT SEATS
Never travel with the head
restraints removed.

2. Armrest.

3. Seat back angle adjustment.

4. Forwards-backwards adjustment.

5. Storage drawer (passenger).

 40

1. Head restraint height adjust-
ment.

FAMILIARISATION10 -
STEERING WHEEL HEIGHT ADJUSTMENT

 When stationary, push the control

A forwards to unlock the steering
wheel.

 Adjust the height of the steering
wheel.

 Lock it by pulling control A
towards you fully.
ELECTRIC WINDOWS

1. Driver's electric window.

2. Passenger's electric window.
EXTERIOR MIRRORS

 Move the manual control 3 in all
four directions to adjust.
Electric control for the
passenger's side mirror

 From the driver's seat, adjust in
all four directions by operating
the control 4 .
Manual mode:

 Press the switch. The window
stops as soon as the switch is
released.
Automatic mode (driver):

 Press and hold the switch. One
touch completely opens or closes
the window.

 61
 62
 66

41SEATS-
FRONT SEATS

The adjustment is correct when
the upper edge of the head
restraint is level with the top of
the head.
To remove the head restraint, place it
in the top position, press the tabs and
pull it upwards.
To put it back in position, locate the
stems of the restraint in the holes,
taking care to keep them in line with
the seat back.
No person or object must pre-
vent the seat from returning
to its initial position; return to
this position is necessary for
the seat to lock in place.
4. Forwards-backwards
adjustment
Lift the control and slide the seat for-
wards or backwards.
1. Head restraint height
adjustment
To raise or lower the restraint, slide it.
2. Armrests
These can be folded back. 3. Seat back angle adjustment
5. Storage drawer (version with
passenger air bag)
There is a storage drawer under the
front passenger seat.
To open it, lift it and pull. 6. Heated seats switch
Press the switch. The temperature is
controlled automatically.
Pressing the switch again stops opera-
tion.

Note: the command for activation of
heating of the seat(s) remains memo-
rised for two minutes after the ignition
has been switched off.
7. Access to rear seats (version with one
sliding side door only)
Lift the control to fold the seat back
and move the seat forwards.
On repositioning, the seat returns to
its initial position (driver’s side).
Do not place heavy objects
in the drawers.
A. Turn the knob.

B. Pull the lever (version
with one sliding side door
only).
Never drive with the head re-
straints removed; they must be
in place and correctly adjusted.

SEATS50 -
SEAT BELTS
Locking the seat belts
Pull the strap, then insert the end into
the buckle.
Check that the seat belt is fastened
correctly by pulling the strap.
Unfastening the seat belts
Press the button on the buckle.
Front seat belts with
pre-tensioner
Safety in the event of frontal impacts
has been improved by the introduction
of pre-tensioning seat belts for the
front seats.
Depending on the seriousness of the
impact, the pre-tensioning system
instantly tightens the seat belts and
pulls them against the bodies of the
occupants.
The pre-tensioning seat belts are
armed when the ignition is on.
Seat belt height adjustment:
To lower or raise: slide the control
downwards or upwards. Rear seat belts
The rear seats are fi tted with three
three-point inertia reel seat belts
(two-part rear seat, 1/3 - 2/3).

COMFORT AND SAFETY66 -
STEERING WHEEL HEIGHT ADJUSTMENT HEADLAMP ADJUSTMENT HORN
HAZARD WARNING LIGHTS
Press the button, the direction indica-
tors fl ash.
They can operate with the ignition off. Press one of the spokes or
the centre of the steering
wheel.

0 - With no load.

1 - With partial load.

2 - With average load.

3 - With maximum authorised load.

0 - 1 or 2 people in the front seats.

- - 3 people.

1 - 5 people.

2 - 5 people + maximum authorised
load.

3 - Driver + maximum authorised
load.

Initial setting is position 0.
Depending on the load in your vehi-
cle, it is recommended that the head-
lamp beam is adjusted.
When stationary, lower the handle to
unlock the steering wheel.
Adjust to the desired height and
lift the handle to lock the steering
wheel.