reset Citroen BERLINGO MULTISPACE 2015 2.G Owner's Manual

Berlingo-2-VP_en_Chap03_Pret-a-partir_ed01-2015
28
Dials
1. Distance  recorder   in   kilometres   /  miles.
2.
 
Display
  screen.
3.
 
Fuel
  gauge,   coolant   temperature.
4.
 
Rev
  counter.
5.
 
T
rip   distance   recorder   /   service  
indicator

  reset.
6.
 
Instrument
  panel   lighting   dimmer.Level 1
INSTRUMENT PANELDisplay screens
Screens
The format of the information presented in the screen depends on
the
  vehicle's   equipment   level.
Level 2
with the touch screen tablet
Instruments and controls

Berlingo-2-VP_en_Chap03_Pret-a-partir_ed01-2015Berlingo-2-VP_en_Chap03_Pret-a-partir_ed01-2015
43
SERVICE INDICATOR
This programmes service intervals according  to   the   use   of   the   vehicle.More than 1 000 miles/km before the
next service is due
Example:
  4   800   miles/km   remain  
before

  the   next   service   is   due.   When  
the ignition is switched on and for a
few

  seconds,   the   screen   shows:
a few seconds after the ignition is
switched on, the oil level is displayed
(depending on version), then the total
distance

  recorder   resumes   normal  
operation showing the total and trip
distances.
Less than 1 000 miles/km before the
next service is due
Each

  time   the   ignition   is   switched   on  
and for a few seconds, the spanner
flashes

  and   the   number   of   miles/
kilometres
  remaining   is   displayed:
a few seconds after the ignition is
switched on, the oil level is displayed
(depending on version), then the total
distance

  recorder   resumes   normal  
operation

  and   the   spanner   remains   on.  
This indicates that a service should be
carried

  out   shortly.
Service overdue
Operation
A
 

few   moments   after   the   ignition  
has been switched on, the spanner
indicating

  a   service   operation   comes  
on; the display for the total distance
recorder

  gives   (in   round   figures)   the  
distance

  remaining   before   the   next  
service.
The points at which a service is due
are

  calculated   from   the   last   indicator  
zero

  reset.
The point at which a service is due is
determined
  by   two   parameters:
-

the distance travelled,
-

 
the
  time   which   has   elapsed   since  
the

  last   service.
The
  distance   remaining   before   the  
next

  service   may   be   weighted   by  
the

  time   factor,   depending   on   the  
type

  of   driving. With the engine running the spanner
remains
  on   until   the   service   has   been  
carried

  out.
For BlueH
d i d iesel versions, this
alert
  is   also   accompanied   by   the   fixed  
illu

mination   of   the   Service   warning  
lamp,

  on   switching   on   the   ignition.
Each
  time   the   ignition   is  
switched on and for a few
seconds, the spanner
flashes

  and   the   excess  
distance

  is   displayed.
For BlueH
d i d iesel versions, the
spanner
  can   also   come   on   early,  
according the level of deterioration
of

  the   engine   oil.   Deterioration   of   the  
engine oil depends on the conditions of
use

  of   the   vehicle.
Instruments and controls
REadY To Go
3

Berlingo-2-VP_en_Chap03_Pret-a-partir_ed01-2015
44
Trip recorder zero reset button
after this operation, if you wish to
disconnect   the   battery,   lock   the  
vehicle

  and   wait   for   at   least   five  
minutes,

  otherwise   the   zero   re-set   will  
not

 
be   registered.
Engine oil level indicator
depending on your vehicle's engine,
when the ignition is switched on, the
engine oil level is indicated for a few
seconds,
  after   the   service   information. Oil level correct
Low oil level
Flashing of "OIL",
linked
  with   the  
service

  warning   lamp,  
accompanied

  by   an  
audible

  signal   and   a   message   in   the  
screen, indicates a low oil level which
could

  damage   the   engine.
If   the   low   oil   level   is   confirmed   by   a  
check

  using   the   dipstick,   it   is   essential  
that

  the   level   is   topped   up.
Oil level gauge fault
Flashing of "OIL--"
indicates a
malfunction   of   the  
engine oil level
indicator
.   Contact   a   CITROËN   dealer  
or

  a   qualified   workshop.
The level read will only be correct
if the vehicle is on level ground
and the engine has been off for
more   than   30   minutes.Dipstick
A
  =   maximum,   never   exceed  
this level as a surplus of oil
may

  damage   the   engine.
Contact a CITR o Ë n dealer
or   a   qualified   workshop  
without

  delay.
B  
=
 
minimum,
 
top
 
up
 
the
 
level
 
via

  the   oil   filler   cap,   using   the  
grade of oil suited to your
engine.
Lighting dimmer
With the ignition on, press
the button until the zeros
appear.
With the lighting on,
press the button to vary
the brightness of the
instruments
  and   controls.  
When the lighting
reaches

  the   minimum   (or  
maximum)

 
setting,   release   the   button  
then press it again to increase (or
reduce)

 
the
 
brightness.
a

s soon as the lighting is of the
required
 
brightness,   release   the   button.
Zero reset
Your CITROËN dealer or a qualified workshop  carries   out   this   operation  
after

  each   service.
However, if you carry out the service
yourself, the re-set procedure is as
follows:
-

switch of
f the ignition,
-

press and hold the trip recorder
reset button,
-

 
switch
  on   the   ignition.
The
  display   begins   a   countdown.
When the display shows "=0", release
the
  button;   the   spanner   disappears.
Instruments and controls

60
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
TRIP COMPUTER
A

few definitions
Range: displays the distance which
can  travelled   with   the   remaining   fuel  
detected

  in   the   tank,   basd   on   the  
average

  consumption   over   the   last   few  
miles

  (kilometres).
This
  displayed   value   may   vary  
significantly

  following   a   change   in   the  
vehicle

  speed   or   the   relief   of   the   route.Current fuel consumption:
only
calculated and displayed above
20   mph   (30   km/h).
Average fuel consumption: this is the
average   fuel   consumption   since   the  
last

  trip   computer   zero   reset.
Distance travelled: calculated since
the   last   trip   computer   zero   reset.
Distance remaining to the
destination: calculated with reference to
the   final   destination,   entered   by   the   user.
 If guidance is activated, the navigation


system   calculates   it   as   a   current   value.
Average speed: this is the average
speed calculated since the last trip
computer
  zero   reset   (ignition   on).
Each press of the button, located at
the
 
end
 
of
 
the
 
wiper
 
stalk,
 
displays
 
the
 
dif

ferent
 
trip
 
computer
 
information
 
in
 
turn,

 
depending
 
on
 
the
 
screen.
When the required trip is displayed,
press  the   control   for   more   than  
two seconds. When
  the   range   falls   below   20   miles  
(30

  km),   dashes   are   displayed.  
After
 
fillin

g   with   at   least   10   litres   of   fuel,   the  
range is recalculated and is displayed
when

  it   exceeds   60   miles   (100   km).
If, whilst driving, dashes are displayed
continuously in place of the digits,
contact   a   CITROËN   dealer.
The "vehicle" tab with the range,
current
 
fuel
 
consumption
 
and
 
the
 remaining
 
distance
 
to
 
run.
The "1" tab (trip 1) with the average
speed,
 
the
 
average
 
fuel
 
consumption
 
and the distance travelled in trip

"1".
The
 
"2"
 
tab
 
(trip
 
2)
 
with
 
the
 
same
 
information

 
for
 
a
 
2
nd trip.
Reset
Steering mounted controls

204
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Steering mounted controls
Radio: select the previous/next preset s tation.
Media:
  select   a   genre   /   artist   /   folder  
f

rom   the   list.
Select
  the   previous/next   entry   in   a  
m

enu.
Decrease
  volume.
Radio:
  automatic   search   for   a   higher  
f

requency.
Media:
  Select   next   track.
Media,
  press   and   hold:   fast   for ward.
Jump
  in   the   list. Mute:
  cut   the   sound   by   pressing  
t

he   volume   increase   and   decrease  
bu

ttons
 s
imultaneously.
Restore the sound by pressing one of
the
  two   volume   buttons.
Radio:
  automatic   search   for   a   lower  f
requency.
Media:
  select   previous   track.
Media,
  press   and   hold:   fast   back.
Jump
  in   the   list.
Change
  the   audio   source.
Confirm
  a   selection.
Call/end
  call   on   the   telephone.
Press
  for   more   than   2   seconds:  
a

ccess   to   the   telephone   menu. Increase
  volume.
audio and Telematics

220
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Radio Media
Level 1Level 2
List of FM stations
Preset
audio and Telematics

221
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Level 1Level 2 Comments
Radio Media
List List of FM stations
Press
  on   a   radio   station   to   select   it.
Radio Media Source FM Radio
Select
  change   of   source.
DAB Radio
AM Radio
Jukebox
USB
MirrorLink
iPod
Bluetooth
AU
x
R

adio MediaPreset Press
  an   empty   location   to   Preset   it.
audio and Telematics
TECHnoLoGY on BoaRd
10

223
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Level 1Level 2 Level 3 Comments
Radio Media
Secondary page Radio list Preset
Press
  a   radio   station   to   select   it.
Update list Update
  the   list   of   stations   received.
Frequency Enter
  the   desired   radio   frequency.
Confirm Save
  the   settings.
Radio Media
Secondary page Photos Home screen
Display
  the   selected   photo   in   the   home   page.
Rotate Rotate
  the   photo   90°.
Select all Select
  all   the   photos   in   the   list.
Press
  again   to   deselect.
Slideshow Previous
 pho

to.Display
  the   photos   in   sequence,   full   screen.
The
  system   supports   the   following   image  
f

ormats:   .gif,   .jpg,   .bmp,   .png.
Pause
  /   Play.
Next
  photo.
Full screen Display
  the   selected   photo   full-screen.
Radio Media
Secondary page
Manage Jukebox Sor t by folder
Choose
  a   selection   mode.
Sor t by album
Select all
Copy Copy
  files   to   the   Jukebox.
Magnifying glass Create folder
Choose
  the   desired   function.
Rename
de

lete
Select all
Confirm Save
  the   settings.
audio and Telematics
TECHnoLoGY on BoaRd
10

226
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Press on Radio Media to display the
primary pag e.
Press Radio Media to display the
primary
 pag

e. Select "
Preset".
If necessary, select change of
source. Press on Radio Media
to display the
primary pag e.
Select
  change   source.
"
AM Radio ". By automatic frequency search
Select "FM Radio ".
" AM Radio ".
Press
  on   the   secondary   page. Select a preset radio station
in
  the   list.
Select " FM Radio ".
Select
  a   radio   station   from  
t

he   list   offered.
Select " Update list " to refresh the
list. Select " List"
  in   the   primary   page.
o

r
Press on Radio Media
to display the
primary
 pag

e.
Radio
Changing a radio frequency
Selecting a station
OR THEN
Radio   reception   may   be   affected   by  
t

he   use   of   electrical   equipment   not  
a

pproved by CITR
oËn, s
uch as a USB
charger   connected   to   the   12   V   socket.
The   exterior   environment   (hills,  
b

uildings,   tunnel,   car   park,   below  
g

round...)   may   prevent   reception,  
e

ven   in   RDS   station   tracking   mode.  T
his   phenomenon   is   normal   in   the  p
ropagation of radio waves and is in no
way indicative of a fault with the audio
system.
o
r
Select " Radio list " in the secondary
page.
o
r
Press 3 or 4   to   move   the   cursor   for   an  
a

utomatic   search   down   or   up   for   a   radio  
f

requency.
o

r
audio and Telematics

 227
Berlingo-2-VP_en_Chap10a_SMEGplus_ed01-2015
Select a radio station or frequency (refer to the
corresponding section). Press on Radio Media
to display the
primary pag e.
Press
  on   the   secondary   page.
Select " Settings ".
Select " Radio".
Activate/deactivate
 " R

DS
options ".
Press on Radio Media
to display the
primary
 pag

e.
Press
 
on
 
the
 
secondary
 
page. Press on "
Preset".
Select
  a   number   in   the   list   to   preset   the  
p

reviously   chosen   radio   station.
A
  long   press   on   a   number   presets   (memorises)  
t

he   station.
Press on Frequency
.
Enter
 
the
 
frequency
 
in
 
full
 
(e.g.:
 
9

2.10
 
MHz)
 
using
 
the
 
keypad
 
then
 
" Co

nfirm ".
Changing radio station
Pressing
 
the
 
name
 
of
 
the
 
current
 
radio
 
station
 
b

rings
 
up
 
a
 
list.
To
 
change
 
radio
 
station
 
press
 
the
 
name
 
of
 
the
 
de

sired
 s

tation.
o
r Press on Radio Media to display the
primary
 pag

e.
Select " Save".
Preset a station Activate/ Deactivate RDS
OR
THEN
a

press on this button presets all of
the
  stations   one   after   the   other.
Recall pre-set stations
RdS, if activated, allows you to continue
listening  to   the   same   station   by   automatic r

etuning   to   alternative   frequencies.
 H

owever, in certain conditions, coverage
of
  an   RDS   station   may   not   be   assured
 t

hroughout the entire country as radio
stations
  do   not   cover   100   %   of   the   territory.
 T

his explains the loss of reception of the
station
  during   a   journey.
audio and Telematics
TECHnoLoGY on BoaRd
10