buttons Citroen BERLINGO MULTISPACE RHD 2017 2.G Owner's Manual

19
Berlingo2VP_en_Chap03_Pret-a-partir_ed02-2016
Good practice
Take care not to allow the remote control to come into contact with
grease, dust, rain or a damp
environment.
A
 
heavy   object   attached   to   the   key  
(key

  ring,   ...)   weighing   on   the   shaft  
of

  the   key   in   the   switch,   may   cause   a  
malfunction.
REMOTE CONTROL
Reinitialising the remote

control
Following changing of the remote
control battery or disconnection of the
vehicle battery, the remote control may
have
  to   be   reinitialised.
Wait at least one minute before using
the
  remote   control.
Insert
  the   key   in   the   ignition   switch   with  
the

  buttons   (padlocks)   of   the   remote  
control

  facing   you.
Switch
  on   the   ignition.
Press
  the   locking   padlock   for   at  
least

  five   seconds   within   the   next  
ten seconds.
Switch

  off   the   ignition.
Wait at least one minute before using
the
  remote   control.
The
  remote   control   is   now   working  
again.
Use only identical batteries or
batteries of an equivalent type to
those recommended by CITROËN
dealers.
Do not discard the remote control
batteries, they contain metals which
are

 
harmful
 
to
 
the
 
environment.
Deposit them at a CITROËN
dealership, or at an authorised
collection
 
point.
Unfolding / folding
Changing the battery
Battery ref.: CR1620 / 3 volts.
The   "battery   flat"   information   is   given  
by an audible signal, accompanied by
a

  message   in   the   screen.
To replace the battery, unclip the
casing
  using   a   coin   at   the   ring.
If
  the   remote   control   does   not   work  
after the battery has been changed,
reinitialise

  the   remote   control.
There
  is   a   risk   of   damage   if   the  
replacement battery is not the correct
type.If you do not press the button,
you

  may   damage   the   key's  
folding

  mechanism.
Access
READY TO GO
3

204
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
First steps
Use the buttons above the touch screen tablet
for access to the menu carousel, then press the
virtual  buttons   in   the   touch   screen   tablet.
Each menu is displayed in one or two pages
(primary
  page   and   secondary   page).
Secondary page
Primary page In very hot conditions, the system may
go into stand-by (screen and sound
completely off) for a minimum period of
5
 m

inutes.
Audio and Telematics

205
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Volume adjustment (each s ource i s i ndependent, inc
luding traffic announcements (TA) and
navigation
 i

nstructions).
Mute the sound by pressing simultaneously on
the
  volume   increase   and   reduce   buttons.
Unmute the sound by pressing one of the
two volume
  buttons.
Press Menu
to display the menu
carousel.
Increase
  volume.
Reduce
  volume.
Selecting the audio source (depending on
version):
-
 
"

FM"
 
/
 
"DAB"*
 
/
 
"AM"*
 
stations.
-
 
"

USB"
 
memory
 
stick.
-
 
S

martphone
 
via
 
MirrorLink
TM or CarPlay®.
- T
elephone connected by Bluetooth®* and
Bluetooth® audio streaming*.
-
M
edia player connected to the auxiliary
socket
 
( jack,   cable   not   supplied).
*
  Depending   on   equipment.
Short-cuts:
 
using   the   touch   buttons   in   the   upper  
b

and of the touch screen tablet, it is possible to
go directly to the selection of the audio source
or the list of stations (or titles, depending on the
s o u r c e).
The screen is of the "resistive" type, it
is necessary to press firmly, particularly
for  "flick"   gestures   (scrolling   through   a  
l

ist,   moving   the   map...).   A   simple   wipe  
w

ill   not   be   enough.   Pressing   with   more  
t

han   one   finger   is   not   recognised.
The screen can be used when wearing
gloves.   This   technology   allows   use   at  
a

ll
 t
emperatures.
In very high temperatures, the volume
may   be   limited   to   protect   the   system.  
T

he   return   to   normal   takes   place   when  
t

he temperature in the passenger
compartment   drops.
To clean the screen, use a soft
non-abrasive cloth (spectacles cloth)
without   any   additional   product.
Do
  not   use   pointed   objects   on   the  
sc

reen.
Do not touch the screen with wet
hands.
Audio and Telematics
TECHNOLOGY on BOARD
10

206
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Steering mounted controls
Radio: select the previous/next preset s tation.
Media:
  select   a   genre   /   artist   /   folder  
f

rom   the   list.
Select
  the   previous/next   entry   in  
a m

enu.
Decrease
  volume.
Radio:
  automatic   search   for   a   higher  
f

requency.
Media:
  Select   next   track.
Media,
  press   and   hold:   fast   for ward.
Jump
  in   the   list. Mute:
  cut   the   sound   by   pressing  
t

he volume increase and decrease
buttons
 s

imultaneously.
Restore the sound by pressing one of
the
  two   volume   buttons.
Radio:
  automatic   search   for   a   lower  f
requency.
Media:
  select   previous   track.
Media,
  press   and   hold:   fast   back.
Jump
  in   the   list.
Change
  the   audio   source.
Confirm
  a   selection.
Call/end
  call   on   the   telephone.
Press
  for   more   than   2   seconds:  
a

ccess   to   the   telephone   menu. Increase
  volume.
Audio and Telematics

230
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
Display of options:
i f active but not available, the display will be greyed out,
if
  active   and   available,   the   display   will   be   blank. Display of "Radiotext" for
the
  current   station.
Select   the   audio   source.
Display   the   "DAB"   band.
Display of the name of the
current
 
station.
Short-cut:   access   to   the   choice   of   audio  
s

ource and the list of stations (or titles,
depending   on   the   source).
Select   the   radio   station.
Any thumbnail broadcast by
the
 
station.
Preset stations, buttons 1
to  15.
Short   press:   select   the  
p

reset   radio   station.
Long   press:   preset   a   radio  
s

tation.
Next
 "
Multiplex".
Next   radio   station.
Secondary
 p

age.
Display the name and
number of the "multiplex"
service
 b

eing
 u

sed.
Previous
 "

Multiplex".
Previous
 
radio
 
station.
DAB (Digital Audio Broadcasting) radio
If the "DAB" radio station being listened to is not
available
  on   "FM",   the   "DAB   FM"   option   is   greyed   out.
Journaline® is a text-based information service designed for digital radio systems.
I
t
 
provides
 
text-based   information   structured   around   topics   and   sub-topics.
This
 
service   is   available   from   the   "LIST   OF   DAB   STATIONS"   page.
Audio and Telematics

233
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
It is advisable to restrict file names to
20 characters, without using special characters
(e.g.
  "   "   ?   ;   ù)   to   avoid   any   playing   and  
d

isplaying
 pro
blems.
Use
  only   USB   memory   sticks   formatted   FAT32  
(

file   allocation   table).
The system supports USB mass
storage
  portable   players,   BlackBerry
®
devices or Apple® players via USB
ports.
 
The
 
adaptor   cable   is   not  
sup

plied.
Control of the peripheral device is with
the
 
audio
 
system
 
controls.
Other peripheral devices, not
recognised by the system on
connection, must be connected to the
auxiliary
 
socket
 
using   a   Jack   cable   (not  
sup

plied).
It is recommended that the USB cable
for
 
the
 
portable
 
device   is   used.
To protect the system, do not use a
USB
 
hub.
Bluetooth® audio streaming
Streaming allows audio files on your telephone
to   be   played   through   the   vehicle's   speakers.
Connect
  the   telephone:   see   the   "Telephone "
section, then " Bluetooth".
Choose the " Audio" or "All"
 pro

file.
If play does not start automatically, it may be
necessary
  to   start   the   audio   playback   from   the  
t

elephone.
Control is from the peripheral device or by
using
  the   audio   system   buttons.
Once connected in streaming mode,
the telephone is considered to be a
media
  source.
It is recommended that you activate
" Repeat " on the Bluetooth
® peripheral.
Connecting Apple® players
Connect the Apple® player to the USB port
using
 
a
 
suitable
 
cable   (not   supplied).
Play
 
starts
 
automatically.
Control
 
is
 
via
 
the
 
audio   system.
The classifications available are those
of the portable device connected
(artists
 
/
 
albums   /   genres   /   playlists   /  
a

udiobooks
 
/
  podcasts).
The default classification used is by
artist.
 
To
 
modify   the   classification   used,  
r

eturn to the first level of the menu
then select the desired classification
(playlists for example) and confirm
to go down through the menu to the
desired
 t

rack.
The version of software in the audio system
may not be compatible with the generation of
your Apple
® player.
Audio and Telematics
TECHNOLOGY on BOARD
10

243
Berlingo2VP_en_Chap10a_SMEGplus_ed02-2016
As a safety measure and because it
requires sustained attention by the
driver, using a smartphone when
driving  is   prohibited.
All operations must be done with the
vehicle stationary .
The synchronisation of a
smartphone allows applications on a
smartphone that are adapted to the
MirrorLink
TM technology to be displayed
i
n
 
the
 
vehicle's   screen.
The principles and standards
are
 
constantly   evolving.   For   the  
c

ommunication process between the
smartphone
  and   the   system   to   work  
c

orrectly, the smartphone must be
unlocked;
 
update   the   operating   system  
o

f your smartphone as well as the date
and time in the smartphone and the
system.
For the list of eligible smartphones,
connect to the brand's internet website
in
 
your
 
country. As a safety measure, applications
can only be viewed with the vehicle
stationary; display is interrupted once
the
  vehicle   is   moving.When connecting a smartphone to the
system, it is recommended that Bluetooth®
be
 
started
 
on
 
the
 
smartphone.
Start the application on the
smartphone (optional, depending
on the smartphone and operating
syste m).
Access to the different audio sources remains
accessible
  in   the   margin   of   the   MirrorLink
TM
display,
 
using
 
touch
 
buttons
 
in
 
the
 
upper
 
bar.
Access to the menus for the system is possible
at
 
any
 
time
 
using
 
the
 
dedicated
 
buttons.
During the procedure, several screen
pages relating to certain functions
are
 
displayed.
Accept to start and end the
connection.
Connect
 
a
 
USB
 
cable.
 
The
 
sm

artphone charges when
connected
 
by
 
a
 
USB
 
cable.
Press on " MirrorLink
TM" to
start the application in the
system. Once connection is established, an page
is displayed with the applications already
downloaded to your smartphone and adapted
to
  MirrorLink
TM technology.
If only one application has been downloaded to
the
 
smartphone,   it   starts   automatically.
MirrorLinkTM smartphone
connection
Press the end of the lighting control stalk to s
tart voice recognition of your smartphone via
the
  system.
Voice recognition requires a compatible
smartphone connected to the vehicle by
Bluetooth
®.
Voice recognition
Please note:
- i f your smartphone is supported, to
make
  it   "MirrorLink
TM" compatible,
some phone manufacturers
nevertheless invite you to first
download
 
a
 
dedicated   application.
From the system, press on
" Connected services " to display the
primary
 pag

e.
Audio and Telematics
TECHNOLOGY on BOARD
10

266
Berlingo2VP_en_Chap10b_RD45_ed02-2016
First steps
* Available according to version.
O n   /   Off,   volume   setting.
Select
 s
ource:
Radio;   USB;   AUX;   CD;   Streaming.
Display   the   list   of   local   stations.
Long  
p
ress:  
C
D  
t
racks  
o
r  
M
P3  
f
olders  
(

CD   /   USB). Select   the   screen   display   mode:
Date, audio functions, trip computer,
telephone.
Audio
 se
ttings:
Front /rear   fader,   left /right   balance,  
b

ass/treble,   loudness,   audio  
am

biences.
The DARK button changes the
screen display for improved driving
comfort   at   night.
1
st press: upper bar only illuminated.
2nd press: black screen.
3rd press: return to standard display. Sel ect next frequency
down/up.
Select   previous/next   MP3  
f o l d e r.
Select   previous/next   folder   /   genre   /  
a

rtist   /   playlist   (USB).
Abandon   the   current   operation. Confirm. Buttons 1 to 6
Select   a   pre-set   radio   station.
Long   press:   pre-set   a   station.
Automatic frequency search
down/up.
Select   previous/next   CD,   MP3   or  
U

SB   track.
Eject   CD.
Display
  main   menu. TA (Traffic Announcements)
on/of f.
Long
  press:   PT Y*   (radio   Programme  
T

Yp e).
Select
  AM   /   FM   wavebands.
Audio and Telematics

 267
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Steering mounted controls
Radio: select the previous/next pre-
s et   station.
USB:
  select   genre   /   artist   /   folder  
f

rom   the   classification   list.
Select
  the   previous/next   item   in   a  
m

enu.
Volume
  decrease.
Radio:
  automatic   search   for   a   higher  
f

requency.
CD
  /   MP3   /   USB:   select   the   next  
t

rack.
CD
  /   USB:   continuous   press:   fast  
fo

rward.
Move
  in   the   list. Mute:
  press   the   volume   increase  
and decrease buttons
simultaneously.
The sound is restored by pressing
one
  of   the   two   volume   buttons.
Radio:
  automatic   search   for   a   lower  f
requency.
CD
  /   MP3   /   USB:   select   the   previous  
t

rack.
CD
  /   USB:   continuous   press:   rewind.
Move
  in   the   list.
Change
  audio   source.
Confirm
  a   selection.
Call/end
  call   on   the   telephone.
Press
  for   more   than   2   seconds:  
t

elephone   main   menu. Volume
  increase.
Audio and Telematics
TECHNOLOGY on BOARD
10

268
Berlingo2VP_en_Chap10b_RD45_ed02-2016
Menus
Screen C
Audio functions
Radio;  CD;   USB;   AUX.
Trip computer
Enter distances; Alerts; State of
functions.
Bluetooth
®: Telephone - Audio
Pairing;
 
Hands-free   kit;   Streaming.
Personalisation-configuration
Vehicle parameters; Display;
Languages. For an overview of the menus available,
refer to the "Screen menu map"
section.
Screen A
Radio
Selecting a station
Press the SOURCE
button several
times in succession and select the
radio.
Press the BAND AST button to
select
  a   waveband.
Briefly press one of the buttons to
carry out an automatic search of the
radio
 s

tations.
Press one of the buttons to carry out
a
  manual   search   up   /   down   for   radio  
f

requencies.
Press the LIST REFRESH button to
display the list of stations received
locally
  (30   stations   maximum).
To update this list, press for more
than
  two   seconds.
Audio and Telematics