Citroen C CROSSER 2010.5 1.G Owner's Manual

IX
P R A C T I C A L I N F O R M A T I O N
135
Changing direction indicator
bulbs (1) Coloured bulbs must be replaced
with bulbs of identical specifi cation
and colour.

 Turn the bulb holder A to the left
and remove it.

 Pull the bulb and change it.
To refi t, carry out these operations in
reverse order. Access to the bulbs on the left-hand
side
When you change a bulb on the left-
hand side, remove the relay box fi xing
nut
B and move the relay box towards
the rear. Access to the bulbs on the right-
hand side
When you change a bulb on the right-
hand side:

 Remove the screenwash reservoir
fi xing C and move the reservoir to-
wards the rear.

 Remove the coolant reservoir fi xing
nut D .

 Remove the clip E and raise the reser-
voir moving it towards the front.

IX
136
Changing sidelamp bulbs (3)

 Unscrew the cover H .

 Disconnect the connector.

 Turn the bulb holder I a quarter of a
turn and remove it.

 Pull the bulb and change it.
To refi t, carry out these operations in
reverse order.

 Unscrew the cover F .

 Disconnect the connector.

 Turn the bulb G to the left and re-
move it.
To refi t, carry out these operations in
reverse order.
Changing dipped beam headlamp
bulbs (2)
Changing main beam headlamp
bulbs (4)

 Unscrew the cover J .

 Disconnect the connector.

 Move aside the spring K to release
the bulb and remove it.
To refi t, carry out these operations in
reverse order.

IX
P R A C T I C A L I N F O R M A T I O N
137
Changing integrated direction
indicator side repeaters Changing foglamp bulbs (5)

 Push the repeater A towards the
rear and detach it.

 Unclip the repeater.

 Disconnect the repeater connector
and change the repeater.
To refi t, carry out these operations in
reverse order.
To obtain repeaters, contact a CITROËN
dealer.
 Turn the wheel fully out for easy
access to the fl ap A located in the
wheelarch.
 Using a screwdriver, remove the four
clips B located in the wheelarch.

IX
P R A C T I C A L I N F O R M A T I O N
138

 Using a screwdriver, remove the
three clips C located below the
bumper.
 Lift the access fl ap D located in the
wheelarch and slide it downwards.
 Disconnect the connector E .

 Turn the bulb F to the left and re-
move it.
To refi t, carry out these operations in
reverse order.

IX
P R A C T I C A L I N F O R M A T I O N
139
Rear lamps

1. Third brake
lamp
(
LEDs
).

2. Brake
lamps
/
Sidelamps
(21/5 - W21W - 5 W).

3. Direction indicators
(WY21W - 21 W).

4. Reversing
lamps
(W21W - 21 W).

5. Number plate
lamps
(W5W - 5W).

6. Foglamps
(W21W - 21 W). Changing brake lamp/sidelamp and
direction indicator bulbs
These two bulbs are changed from out-
side with the tailgate open:

 Open the tailgate (refer to the "Ac-
cess" section),

 Remove the two lamp fi xing bolts A ,

 Extract the lamp unit from outside,

Turn the pin C to the left and remove it.

 Pull the bulb D out and change it.
To refi t, carry out these operations in
reverse order.


Turn the pin B to the left and remove it.

 Pull the bulb out and change it. When refi tting the lamp unit, align the
two pins
E with the openings on the ve-
hicle.
Amber coloured bulbs, such as the
direction indicators, must be replaced
with bulbs of identical specifi cation
and colour.
Changing the third brake lamp
(LEDs)
All work on the LED lamps must be car-
ried out by a CITROËN dealer.

IX
140
Changing reversing lamp bulbs

 Open the tailgate (refer to the "Access"
section),

 From the inside of the tailgate, in-
sert a screwdriver in the opening on
the cover A to use it as a lever to
open the cover. Changing number plate lamp bulbs

 Open the tailgate (refer to the "Ac-
cess" section) to gain access to the
number plate lamps D ,

 Remove the lamp unit D while
pressing it to the left.


Turn the pin B to the left and remove it.

 Pull the bulb C out and change it.
To refi t, carry out these operations in
reverse order.
 Insert a thin screwdriver in the open-
ing on the lens to press the tab E .

 Remove the lens.

 Pull the bulb out and change it.
To refi t, carry out these operations in
reverse order.

 To refi t the lamp unit, insert the end of
the tab F fi rst, then align the tab G .

IX
P R A C T I C A L I N F O R M A T I O N
141
Changing foglamp bulbs

 Open the tailgate and the lower tail-
gate (refer to the "Access" section)
and fold down the cover A .

 Remove the 4 clips B using a screw-
driver to detach the lamp cover.

 Remove the bolts C and remove the
lamp unit.
 Turn the pin and bulb assembly D to
the left.

 Remove the bulb.
To refi t, carry out these operations in
reverse order.

 When refi tting the lamp unit, align
the clips E with the openings on the
bodywork.

IX
P R A C T I C A L I N F O R M A T I O N
142
INTERIOR LAMP BULBS
Front and rear courtesy lamps

 Insert a screwdriver to remove the courtesy lamp cover.

 Remove the bulb while pressing the tab A .
To refi t the cover, align the hooks on the holes located in the body of the vehicle.
Glove box lamp

 Turn the pin B anticlockwise and re-
move it.

 Remove the bulb.
Low level lamp

 Insert a screwdriver to remove the
lamp cover.

 Remove the bulb.

IX
!
P R A C T I C A L I N F O R M A T I O N
143
CHANGING A FUSE Changing a fuse
Before changing a fuse, the cause of
the failure must be identifi ed and recti-
fi ed.

 Identify the faulty fuse by checking
the condition of its fi lament.
Access to the tools
The extraction tweezer is installed in
the engine compartment fusebox.
To gain access to it:

 Open the bonnet (refer to the "Ac-
cess" section),

 Press on the hook A and release
the catch,

 Remove the cover completely,

 Remove the tweezer B . Correct Incorrect

 Use the special tweezer to extract
the fuse from its location.

 Always replace the faulty fuse with
a fuse of the same rating.

 Check that the number etched on
the box, the rating etched on the top
of the fuse and the tables below all
agree.
The spare fuses are located on the
engine compartment fusebox cover. Your vehicle’s electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories in your ve-
hicle, contact a CITROËN dealer.
CITROËN will not accept re-
sponsibility for the cost incurred
in repairing your vehicle or for
rectifying the malfunctions resulting
from the installation of accessories
not supplied and not recommended
by CITROËN and not installed in ac-
cordance with its instructions, in par-
ticular when the consumption of all of
the additional equipment connected
exceeds 10 milliamperes.

IX
P R A C T I C A L I N F O R M A T I O N
144
Dashboard fuses
The fuseboxes are placed in the lower
dashboard behind the glove box.
Access to the fuses

 Open the glove box,

 Push the two opening guides A in-
wards to pass the fi rst notch,

 Remove the retaining tab B pulling
it outwards,

 Support the cover and tilt it down-
wards,

 Change the fuse (refer to the cor-
responding paragraph).
Fuse N° Rating Functions

1 * 30 A Heating.

2 15 A Brake lamps, third brake lamp, built-in systems
interface.

3 10 A Rear foglamps.

4 30 A Windscreen wipers and screenwash.

5 10 A Diagnostic socket.

6 20 A Central locking, door mirrors.

7 15 A Audio system, telematics, multifunction screen,
hands-free kit.

8 7.5 A Remote control key, air conditioning control unit,
instrument panel, switch panel, steering mounted
controls.

9 15 A Multifunction screen, instrument panel.

10 15 A Built-in systems interface.

11 15 A Rear wiper.

12 7.5 A Instrument panel, 4 wheel drive control unit,
air conditioning control panel, ABS control
unit, multifunction screen, automatic headlamp
adjustment, heated seats, airbag control unit,
steering wheel angle sensor, sunroof, rear screen
demisting, remote control.

13 - Not used.

14 10 A Ignition switch.

15 20 A Sunroof.

16 10 A Door mirrors, audio system, telematics.