ignition CITROEN C-ELYSÉE 2017 User Guide

24
Service overdue
For 5 seconds after the ignition is switched on, the spanner flashes   to   indicate   that   the   service m

ust   be   carried   out   as   soon   as   possible.
Example:
 

the   service   is   overdue   by   186   miles
 (

300   km).
For
  5   seconds   after   the   ignition   is   switched   on,
 t

he   screen   indicates:
For
  BlueHDi   Diesel   versions,   this   alert  
m

ay   also   be   accompanied   by   the   fixed  
i

llumination   of   the   service   warning   lamp  
w

hen   the   ignition   is   on. Following
  this   operation,   if   you   wish   to  
d

isconnect   the   battery,   lock   the   vehicle  
a

nd   wait   at   least   five   minutes   for   the  
z

ero   reset   to   be   taken   into   account.
Service indicator
zero reset
After each service, the service indicator must b
e   reset   to   zero.
The
  procedure   for   resetting   to   zero   is   as  
f

ollows:
F
 
s
witch   off   the   ignition,
F
 
p
ress   and   hold   the   trip   distance   recorder  
z

ero reset button,
F
 
s
witch  
o
n  
t
he  
i
gnition;  
t
he  
d
istance  
r
ecorder  
d

isplay   begins   a   countdown,
F
 
w
hen   the   display   indicates   "=0", release
the
  button;   the   spanner   disappears.
5
 
seconds
 
after
 
the
 
ignition
 
is
 
switched
 
on,
 t
he
 
distance
 
recorder
 
resumes
 
its
 
normal
 
ope

ration.
 T

he spanner remains on .The
 
distance
 
remaining
 
may
 
be
 
w

eighted
 
by
 
the
 
time
 
factor,
 
depending
 
o

n
 
the
 
driving
 
conditions.
Therefore,
 
the
 
spanner
 
may
 
also
 
come
 
o

n
 
if
 
you
 
have
 
exceeded
 
the
 
period
 
s

ince
 
the
 
last
 
service,
 
indicated
 
in
 
the
 
ma

nufacturer's
 ser

vice
 s

chedule.
For
 
BlueHDi
 
Diesel
 
versions,
 
the
 
s

panner
 
may
 
also
 
be
 
brought
 
on
 
earlier
 
t

han
 
expected,
 
depending
 
on
 
the
 
d

egree
 
of
 
deterioration
 
of
 
the
 
engine
 
oil
 
(

depending
 
on
 
the
 
country
 
of
 
sale).
The
 
rate
 
of
 
deterioration
 
of
 
the
 
engine
 o
il
 
depends
 
on
 
the
 
driving
 
conditions
 
in
 w
hich
 
the
 
vehicle
 
is
 
used.
Monitoring

25
C-elysee_en_Chap01_controle-de-marche_ed01-2016
C-elysee_en_Chap01_controle-de-marche_ed01-2016
Retrieving the service
information
You can access the service information at any   time.
F
 
P
ress   the   trip   distance   recorder   zero   reset  
b

utton.
 T

he   service   information   is   displayed   for   a  
f

ew   seconds,   then   disappears.
System
  which   measures   the   total   distance  
t

ravelled   by   the   vehicle   during   its   life.
The
  total   and   trip   distances   are   displayed   for  
t

hirty   seconds   when   the   ignition   is   switched   off,  
w

hen   the   driver's   door   is   opened   and   when   the  
v

ehicle   is   locked   or   unlocked.
Total distance recorder
System which measures a distance travelled during   a   day   or   other   period   since   it   was   reset  
t

o   zero   by   the   driver.
F
 
W
ith   the   ignition   on,   press   the   button   until  
z

eros   appear.
Trip distance recorder
Distance recorders
1
M

35
C-elysee_en_Chap02_ouvertures_ed01-2016
If the problem persists, contact a CITROËN   dealer   as   soon   as   possible.
If the battery is flat, you are
informed
 
by
 
illumination
 
of
 
this
 
w

arning
 
lamp,
 
an
 
audible
 
signal
 
a

nd
 
a
 
message
 
in
 
the
 
screen.
Changing the battery
F Remove
  the   flat   battery   from   its   location.
F F it the new battery into its location
observing
  the   original   direction   of   fitment.
F
 
C
lip   the   cover   onto   the   casing.
In
 
the
 
event
 
of
 
a
 
fault
 
with
 
the
 
remote
 
control,
 
y

ou
 
can
 
no
 
longer
 
unlock,
 
lock
 
or
 
locate
 
your
 
v

ehicle.
F
 
F

irst
 
of
 
all,
 
use
 
the
 
key
 
in
 
the
 
lock
 
to
 
unlock
 
o

r
 
lock
 
your
 
vehicle.
F
 
T

hen,
 
reinitialise
 
the
 
remote
 
control.
Fault with the remote
control
Reinitialisation
F Switch
  off   the   ignition   and   remove   the  ig
nition k ey.
F
 
P
ress   the   closed   padlock   immediately  
for
  a   few   seconds.
F
 
T
urn   the   key   to   position   2 (Ignition on).
F
 
S
witch   off   the   ignition   and   remove   the   key  
f

rom   the   ignition   switch.
The
  remote   control   is   fully   operational   again.Battery
  ref.:   CR2032   /   3   volts.
F
 
U
nclip   the   cover   using   a   small   screwdriver  
a

t   the   cutout.
F
 
L
ift   off   the   cover.
2
Access

36
C-elysee_en_Chap02_ouvertures_ed01-2016
Lost keys
Go to a CITROËN dealer with the vehicle's registration document, your personal identification   documents   and   if   possible   the   key   code   label.
The
  CITROËN   dealer   will   be   able   to   look   up   the   key   code   and   the   transponder   code  
r

equired   to   order   a   new   key.
Remote control
The high frequency remote control is a sensitive system; do not operate it while it is in your pocket   as   there   is   a   possibility   that   it   may   unlock   the   vehicle,   without   you   being   aware   of   it.
Do
  not   repeatedly   press   the   buttons   of   your   remote   control   out   of   range   and   out   of   sight   of  
y

our   vehicle.   You   run   the   risk   of   stopping   it   from   working   and   the   remote   control   would   have  
t

o   be   reinitialised.
No
  remote   control   can   operate   when   the   key   is   in   the   ignition   switch,   even   when   the   ignition  
i

s   switched   off,   except   for   reinitialisation.
Locking the vehicle
Driving with the doors locked may make access to the passenger compartment by the emergency   services   more   difficult   in   an   emergency.
As
  a   safety   precaution,   never   leave   children   alone   in   the   vehicle,   except   for   a   very   short  
p

eriod.
In
  all   cases,   it   is   essential   to   remove   the   key   from   the   ignition   switch   when   leaving   the   vehicle.
Anti-theft protection
Do not make any modifications to the electronic engine immobiliser system; this could cause m alfunctions.
When purchasing a second-hand vehicle
Have the pairing of all of the keys in your possession checked by a CITROËN dealer, to ensure   that   only   your   keys   can   be   used   to   open   and   start   the   vehicle.Do
  not   throw   the   remote   control  
b

atteries   away,   they   contain   metals  
w

hich   are   harmful   to   the   environment.
Take   them   to   an   approved   collection  
po

int.
Ac

37
C-elysee_en_Chap02_ouvertures_ed01-2016
System which p rotects  a nd  p rovides  a  d eterrent  a
gainst   theft   and   break-ins.   It   provides  
p

erimeter   protection   as   well   as   a   self-protection  
f

unction.
Alarm
Perimeter protection
The system checks for opening of the vehicle.
T he   alarm   is   triggered   if   anyone   tries   to   open   a  
d

oor,   the   boot,   the   bonnet...
Self-protection function
The system checks for the putting out of service   of   its   components.
The
  alarm   is   triggered   if   the   battery,   the  
c

entral control or the wires of the siren
are
  put   out   of   service   or   damaged.
Locking the vehicle with
alarm
Activation
F Switch off the ignition and get out of the vehicle.
F Press  the   locking   button   on   the  r
emote   control.
The
 
perimeter   protection   is   activated   5   seconds  
a

fter
 
pressing   the   locking   button   on   the   remote  
c

ontrol.
If
 
an
 
opening   (door,   boot...)   is   not   closed  
f

ully,
 
the
 
vehicle   is   not   locked   but   the   alarm   is  
a

ctivated. F
 
P
ress   the   unlocking   button   on  
t

he   remote   control.
Deactivation
The alarm is deactivated: the indicator   lamp   goes   off.
The
  alarm   is   activated:   a   indicator  
l

amp   in   the   switch   panel   to   the  
left   of   the   steering   wheel   flashes  
o

nce   per   second.
For
 
all
 
work
 
on
 
the
 
alarm
 
system,
 
c

ontact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
2
Access

38
C-elysee_en_Chap02_ouvertures_ed01-2016
Triggering of the alarm Locking the vehicle without activating the alarm
F Lock  the   vehicle   using   the   key.
Failure of the remote control
To deactivate the monitoring functions:
F  
U
nlock   the   vehicle   using   the   key.
F
 
O
pen   the   door;   the   alarm   is   triggered.
F
 
S
witch   on   the   ignition;   the   alarm   stops.
Faults
This is indicated by sounding of the siren 
a nd   flashing   of   the   direction   indicators   for  
thirty
  seconds.
When
  the   ignition   is   switched   on,   fixed  
i

llumination   of   the   indicator   lamp   indicates   a  
f

ault   with   the   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
When
  the   vehicle   is   unlocked   using  
t

he   remote   control,   rapid   flashing  
o

f   the   indicator   lamp   informs   you  
t

hat   the   alarm   was   triggered   during  
y

our   absence.   When   the   ignition  
i

s   switched   on,   this   flashing   stops  
i

mmediately.
Access

42
C-elysee_en_Chap02_ouvertures_ed01-2016
Windows
Electric controls Manual controls
The electric window switches remain operational   for   about   45   seconds   after  
s

witching   off   the   ignition   or   until   a   front  
d

oor   is   opened.   During   this   period   of  
4

5   seconds,   if   you   open   a   door   while  
o

perating   a   window,   the   window   stops.  
O

perating   the   switch   again   has   no  
e

ffect   until   the   ignition   is   switched   on  
ag

ain. Always
  remove   the   key   from   the   ignition  
w

hen   leaving   the   vehicle,   even   for   a  
s

hort   time.
In   the   event   of   contact   during   operation  
o

f   the   windows,   you   must   reverse   the  
m

ovement   of   the   window.   To   do   this,  
p

ress   the   switch   concerned.
When   operating   the   passenger   electric  w
indow   switches,   the   driver   must  e
nsure   that   no   one   is   preventing   correct  
c

losing   of   the   windows.
The
  driver   must   ensure   that   the  
p

assengers   use   the   electric   windows  
c

o r r e c t l y.
Be
  particularly   aware   of   children   when  
o

perating
 t
he
 w
indows.
1.
L

eft hand front electric window.
2.
R

ight hand front electric window.
3.
R

ight hand rear electric window.
4.
L

eft hand rear electric window.
5.
D

eactivating the rear electric window
switches .
To
 
open   or   close   the   window,   press   or   pull   the  
s

witch.  
T
he  
w
indow  
s
tops  
a
s  
s
oon  
a
s  
t
he  
s
witch  
i

s
 r

eleased.
Turn
 
the
 
window
 
winder
 
located
 
on
 
the
 
door
 
t

rim
 pan

el.
Deactivating the rear window
controls
For the safety of your children, press switch 5
t o   prevent   operation   of   all   of   the   windows,  
i

rrespective   of   their   position.
With
  the   warning   lamp   on,   the   switches   are  
d

eactivated.   With   the   warning   lamp   off,   the  
s

witches   are   active.
Model with front electric windows
Model with front and rear electric windows
Access

64
C-elysee_en_Chap05_conduite_ed01-2016
Starting-switching off the engine
It has 3 positions:
-  p osition   1 (Stop):
  insert   and   removing   the  
k

ey,
-
 
p
osition   2 (Ignition on) :
  steering   column  
u

nlocked,   ignition   on,   Diesel   preheating,  
e

ngine
 r
unning,
-
 
p
osition   3 (Star ting).
Ignition switch
It allows the use of the vehicle's electric e
quipment   or   portable   devices   to   be   charged.
Once
  the   state   of   charge   of   the   battery   drops  
t

o   the   reserve   level,   the   system   switches   to  
e

nergy   economy   mode:   the   power   supply   is  
c

ut   off   automatically   to   preserve   the   remaining  
b

attery   charge.
Ignition on positionAnti-theft protection
Electronic engine immobiliser
The key contains an electronic chip which has a  special   code.   When   the   ignition   is   switched  
o

n,   this   code   must   be   recognised   in   order   for  
s

tarting   to   be   possible.
This
  electronic   engine   immobiliser   locks   the  
e

ngine   management   system   a   few   moments  
a

fter   the   ignition   is   switched   off   and   prevents  
s

tarting   of   the   engine   by   anyone   who   does   not  
h

ave   the   key.In the event of a fault, you are
informed
  by   illumination   of   this  
w

arning   lamp,   an   audible   signal   and   a   message  
i

n   the   screen.
In
  this   case,   your   vehicle   will   not   start;   contact  
a

  CITROËN   dealer   as   soon   as   possible.
Keep
  safely,   away   from   your   vehicle,  
t

he   label   attached   to   the   keys   given   to  
y

ou   on   acquisition   of   the   vehicle. Avoid
  attaching   heavy   objects   to   the  
k

ey,   which   would   weigh   down   on   its  
b

lade   in   the   ignition   switch   and   could  
c

ause   a   malfunction.
Driving

65
C-elysee_en_Chap05_conduite_ed01-2016
In certain cases, you may have to apply more   force   to   the   steering   (wheels   on  
f

ull   lock,   for   example).
Starting the engine
F With  a   petrol   engine,   operate   the   starter  m
otor   by   turning   the   key   to   position   3
without
  pressing   the   accelerator   pedal,  
u

ntil   the   engine   starts.   Once   the   engine   is  
r

unning,   release   the   key. F
 
W
ith   a   Diesel   engine,   turn   the   key   to  
p

osition 2
,   ignition   on,   to   operate   the  
eng

ine
 p
re-heating
 s
ystem.
With   the   parking   brake   applied   and   the   gearbox  
i

n neutral or position N or P
:
F  
d
epress   the   clutch   pedal   fully   (manual  
g

earbox),


or
F  
p
ress   the   brake   pedal   firmly   (electronic   or  
a

utomatic   gearbox),
F  
i
nsert   the   key   into   the   ignition   switch;   the  
s

ystem   recognises   the   code,
F  
u
nlock   the   steering   column   by  
s

imultaneously   turning   the   steering   and  
t

he key.
Wait until this warning lamp goes off in the i
nstrument   panel   then   operate   the   starter m

otor   by   turning   the   key   to   position 3
without
  pressing   the   accelerator   pedal,
 u

ntil   the   engine   starts.   Once   the   engine   is
 r

unning,   release   the   key.
If the engine does not start straight away,   switch   off   the   ignition.   Wait   a  
f

ew   moments   before   operating   the  
s

tarter   motor   again.   If   the   engine   does  
n

ot   start   after   several   attempts,   do   not  
k

eep   trying:   you   risk   damaging   the  
s

tarter   motor   or   the   engine.   Contact  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop.
In
  wintry   conditions,   the   warning   lamp  
c

an   stay   on   for   a   longer   period.   When  
t

he   engine   is   hot,   the   warning   lamp  
d

oes   not   come   on. Never   leave   the   engine   running   in  
a

n   enclosed   area   without   adequate  
v

entilation:
 in
ternal
 c
ombustion
 e

ngines   emit   toxic   exhaust   gases,  
s

uch   as   carbon   monoxide.   Danger   of  
i

ntoxication   and   death.
In   very   severe   wintry   conditions  
(

temperatures   below   -23°C),   to   ensure  
t

he   correct   operation   and   durability   of  
t

he   mechanical   components   of   your  
v

ehicle,   engine   and   gearbox,   it   is  n
ecessary   to   leave   the   engine   running  f
or   4   minutes   before   moving   off.
In
  temperate   conditions,   do   not   leave  
t

he   engine   at   idle   to   warm   up   but   move  
o

ff   straight   away   and   drive   at   moderate  
s

peed.
5
Driving

66
C-elysee_en_Chap05_conduite_ed01-2016
Never switch off the ignition before the vehicle   is   at   a   complete   stop.   With   the  
e

ngine   off,   the   braking   and   steering  
a

ssistance   systems   are   also   cut   off:   risk  
o

f   loss   of   control   of   the   vehicle.
For
  more   information,   refer   to   the  
"

Practical   information"   section,   under  
"

Energy   economy   mode".
When
  you   leave   the   vehicle,   keep   the  
k

ey   with   you   and   lock   the   vehicle.
To
 
facilitate
 
unlocking
 
of
 
the
 
steering
 c

olumn,
 
it
 
is
 
recommended
 
that
 
the
 w

heels
 
be
 
returned
 
to
 
the
 
straight
 
ahead
 p

osition
 
before
 
switching
 
off
 
the
 
engine.
Switching off the engine
F Check   that   the   parking   brake   is   correctly  a
pplied,   particularly   on   sloping   ground.
F
 
S
top   the   vehicle.
F  
W
ith   the   engine   running   at   idle,   turn   the   key  
t

o position 1
.
F  
R
emove   the   key   from   the   ignition   switch.
F  
T
o   lock   the   steering   column,   turn   the  
s

teering   until   it   locks.
Energy economy mode
After switching off the engine (position 1- Stop
), f
or   a   maximum   of   30   minutes   you   can   still   use  
f

unctions   such   as   the   audio   and   telematic  
s

ystem,   the   wipers,   dipped   beam   headlamps,  
c

ourtesy   lamps,   ...
Key left in the "Ignition on"
position
On opening the driver's door, an alert message   is   displayed,   accompanied   by   an a

udible   signal,   to   remind   you   that   the   key   is
 s

till  
i
n  
t
he  
i
gnition  
s
witch  
a
t  
p
osition  
1
(Stop).
If the key has been left in the ignition s
witch at position 2 (Ignition on) ,
the
  ignition   will   be   switched   off  
a

utomatically   after   one   hour.
To
  switch   the   ignition   back   on,   turn   the  
k

ey   to   position   1 (Stop),
  then   back   to  
p

osition 2 (Ignition on) .
Driving