lock CITROEN C-ELYSÉE 2017 User Guide

37
C-elysee_en_Chap02_ouvertures_ed01-2016
System which p rotects  a nd  p rovides  a  d eterrent  a
gainst   theft   and   break-ins.   It   provides  
p

erimeter   protection   as   well   as   a   self-protection  
f

unction.
Alarm
Perimeter protection
The system checks for opening of the vehicle.
T he   alarm   is   triggered   if   anyone   tries   to   open   a  
d

oor,   the   boot,   the   bonnet...
Self-protection function
The system checks for the putting out of service   of   its   components.
The
  alarm   is   triggered   if   the   battery,   the  
c

entral control or the wires of the siren
are
  put   out   of   service   or   damaged.
Locking the vehicle with
alarm
Activation
F Switch off the ignition and get out of the vehicle.
F Press  the   locking   button   on   the  r
emote   control.
The
 
perimeter   protection   is   activated   5   seconds  
a

fter
 
pressing   the   locking   button   on   the   remote  
c

ontrol.
If
 
an
 
opening   (door,   boot...)   is   not   closed  
f

ully,
 
the
 
vehicle   is   not   locked   but   the   alarm   is  
a

ctivated. F
 
P
ress   the   unlocking   button   on  
t

he   remote   control.
Deactivation
The alarm is deactivated: the indicator   lamp   goes   off.
The
  alarm   is   activated:   a   indicator  
l

amp   in   the   switch   panel   to   the  
left   of   the   steering   wheel   flashes  
o

nce   per   second.
For
 
all
 
work
 
on
 
the
 
alarm
 
system,
 
c

ontact
 
a
 
CITROËN
 
dealer
 
or
 
a
 
q

ualified
 w

orkshop.
2
Access

38
C-elysee_en_Chap02_ouvertures_ed01-2016
Triggering of the alarm Locking the vehicle without activating the alarm
F Lock  the   vehicle   using   the   key.
Failure of the remote control
To deactivate the monitoring functions:
F  
U
nlock   the   vehicle   using   the   key.
F
 
O
pen   the   door;   the   alarm   is   triggered.
F
 
S
witch   on   the   ignition;   the   alarm   stops.
Faults
This is indicated by sounding of the siren 
a nd   flashing   of   the   direction   indicators   for  
thirty
  seconds.
When
  the   ignition   is   switched   on,   fixed  
i

llumination   of   the   indicator   lamp   indicates   a  
f

ault   with   the   system.
Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
When
  the   vehicle   is   unlocked   using  
t

he   remote   control,   rapid   flashing  
o

f   the   indicator   lamp   informs   you  
t

hat   the   alarm   was   triggered   during  
y

our   absence.   When   the   ignition  
i

s   switched   on,   this   flashing   stops  
i

mmediately.
Access

39
C-elysee_en_Chap02_ouvertures_ed01-2016
Doors
From outside
F After  unlocking   the   vehicle   using   the  r
emote   control   or   the   key,   pull   the   door  
han

dle.
Opening
From inside
F Pull  the   interior   control   lever   of   a   front   door;  t
his   unlocks   the   vehicle   completely. -
 
w
hen the engine is running
,
this   warning   lamp   comes   on,  
a

ccompanied   by   a   message   in  
t

he   multifunction   screen   for  
a   few   seconds,
-  
w
hen the vehicle is moving   (speed  
h

igher   than   6   mph   (10   km/h)),   this   warning  
l

amp   comes   on,   accompanied   by   an  
a

udible   signal   and   a   message   in   the  
m

ultifunction   screen   for   a   few   seconds.
Closing
When a door is not closed correctly:
Secondary control
For mechanically locking and unlocking the d
oors   in   the   event   of   a   fault   with   the   central  
l

ocking   system   or   a   battery   failure.
Driver's door
Insert the key in the lock to lock or unlock the do o r.
Passenger doors
F On   the   rear   doors,   check   that   the   child   lock  i
s   not   on.
F
 
R
emove   the   black   cap   located   on   the   edge  
o

f   the   door,   using   the   key.
F
 
I
nsert   the   key   into   the   aperture   without
 f

orcing,   then   without   turning,   move   the   latch
 s

ideways   towards   the   inside   of   the   door.
F
 
R
emove   the   key   and   refit   the   cap.
2
Access

40
C-elysee_en_Chap02_ouvertures_ed01-2016
Boot
Opening
Unlocking and releasing the boot
using the remote control
F Press the centre button on the remote   control   for   more   than  
on

e second.
The
  boot   lid   is   released   and   opens  
s

li g ht l y.
Releasing the boot from the
inside
Opening the boot
F Raise  the   boot   lid   to   its   fully   open   position.
F  
L
ower   the   boot   lid   using   one   of   the   interior  
g

rab
 han
dles.
Closing
Electric boot opening
- when the engine is running , this
warning lam p c omes o n, a ccompanied b

y   a   message   in   the   multifunction
 s

creen   for   a   few   seconds,
- when the vehicle is moving   (speed   above 
6   mph   (10   km/h)),   this   warning   lamp   comes o

n,   accompanied   by   an   audible   signal   and
 
a

  message   in   the   multifunction   screen   for
 
a

  few   seconds.
F
 
P

ress
 
the
 
boot
 
opening
 
switch
 
located
 
o

n
 
the
 
left
 
of
 
the
 
dashboard
 
(electric
 
boot
 
o

pening).


or
Mechanical boot opening
There is no associated warning for the boot lid n ot   being   fully   closed.
You
  should   ensure   that   the   boot   is   closed  
c

o r r e c t l y.
If
  the   boot   is   not   closed   correctly:
F
 
R

aise
 
the
 
control
 
lever
 
below
 
the
 
driver's
 
d

oor
 
(mechanical
 
boot
 
opening).
The
 
boot
 
lid
 
is
 
released
 
and
 
opens
 
slightly.
Access

41
C-elysee_en_Chap02_ouvertures_ed01-2016
Locking / unlocking from the inside
F Press  the   switch.
This   allows   the   doors   and   the   boot   to   be   locked  
o

r   unlocked.Automatic central locking of the
doors
The doors can lock automatically while driving (speed   above   6   mph   (10   km/h)).
To
  turn   this   function   on   or   off   (on   by   default).
F
 
p
ress   and   hold   the   button   until   there   is   an  
a

udible   signal   and/or   a   message   in   the  
sc

reen.
Locking from outside
When
 
the
 
vehicle
 
is
 
locked
 
from
 
o

utside,
 
the
 
switch
 
does
 
not
 
operate.
F
 
T

o
 
unlock
 
the
 
vehicle,
 
pull
 
the
 
i

nterior
 
door
 
lever.
If
 
one
 
of
 
the
 
doors
 
is
 
open,
 
the
 
doors
 
a

re
 
not
 
locked.
Driving
  with   the   doors   locked   may   make  
a

ccess   to   the   passenger   compartment  
b

y   the   emergency   services   more  
d

ifficult   in   an   emergency.
Boot release
Unlocking
F Fold  back   the   rear   seats   to   gain   access  
to   the   lock   from   inside   the   boot.
F
 
I
nsert   a   small   screwdriver   into   hole   A of the
lock
  to   unlock   the   boot   lid.
System
  for   mechanical   unlocking   of   the   boot  
i

n   the   event   of   a   battery   or   central   locking  
m

alfunction.
If   your   vehicle   is   fitted   with   a   fixed  
b

ench   seat,   contact   a   CITROËN   dealer  
o

r   a   qualified   workshop.
2
Access

48
C-elysee_en_Chap03_confort_ed01-2016
Steering wheel adjustment
F When stationary , lower the control lever
to   release   the   steering   wheel   adjustment  
m

echanism.
F
 
A
djust   the   height   to   suit   your   driving   position.
F
 
P
ull   the   control   lever   to   lock   the   steering  
w

heel
 a
djustment
 m
echanism.
As a safety precaution, these
operations
  should   only   be   carried   out  
w

hile   the   vehicle   is   stationary.
Comfort

64
C-elysee_en_Chap05_conduite_ed01-2016
Starting-switching off the engine
It has 3 positions:
-  p osition   1 (Stop):
  insert   and   removing   the  
k

ey,
-
 
p
osition   2 (Ignition on) :
  steering   column  
u

nlocked,   ignition   on,   Diesel   preheating,  
e

ngine
 r
unning,
-
 
p
osition   3 (Star ting).
Ignition switch
It allows the use of the vehicle's electric e
quipment   or   portable   devices   to   be   charged.
Once
  the   state   of   charge   of   the   battery   drops  
t

o   the   reserve   level,   the   system   switches   to  
e

nergy   economy   mode:   the   power   supply   is  
c

ut   off   automatically   to   preserve   the   remaining  
b

attery   charge.
Ignition on positionAnti-theft protection
Electronic engine immobiliser
The key contains an electronic chip which has a  special   code.   When   the   ignition   is   switched  
o

n,   this   code   must   be   recognised   in   order   for  
s

tarting   to   be   possible.
This
  electronic   engine   immobiliser   locks   the  
e

ngine   management   system   a   few   moments  
a

fter   the   ignition   is   switched   off   and   prevents  
s

tarting   of   the   engine   by   anyone   who   does   not  
h

ave   the   key.In the event of a fault, you are
informed
  by   illumination   of   this  
w

arning   lamp,   an   audible   signal   and   a   message  
i

n   the   screen.
In
  this   case,   your   vehicle   will   not   start;   contact  
a

  CITROËN   dealer   as   soon   as   possible.
Keep
  safely,   away   from   your   vehicle,  
t

he   label   attached   to   the   keys   given   to  
y

ou   on   acquisition   of   the   vehicle. Avoid
  attaching   heavy   objects   to   the  
k

ey,   which   would   weigh   down   on   its  
b

lade   in   the   ignition   switch   and   could  
c

ause   a   malfunction.
Driving

65
C-elysee_en_Chap05_conduite_ed01-2016
In certain cases, you may have to apply more   force   to   the   steering   (wheels   on  
f

ull   lock,   for   example).
Starting the engine
F With  a   petrol   engine,   operate   the   starter  m
otor   by   turning   the   key   to   position   3
without
  pressing   the   accelerator   pedal,  
u

ntil   the   engine   starts.   Once   the   engine   is  
r

unning,   release   the   key. F
 
W
ith   a   Diesel   engine,   turn   the   key   to  
p

osition 2
,   ignition   on,   to   operate   the  
eng

ine
 p
re-heating
 s
ystem.
With   the   parking   brake   applied   and   the   gearbox  
i

n neutral or position N or P
:
F  
d
epress   the   clutch   pedal   fully   (manual  
g

earbox),


or
F  
p
ress   the   brake   pedal   firmly   (electronic   or  
a

utomatic   gearbox),
F  
i
nsert   the   key   into   the   ignition   switch;   the  
s

ystem   recognises   the   code,
F  
u
nlock   the   steering   column   by  
s

imultaneously   turning   the   steering   and  
t

he key.
Wait until this warning lamp goes off in the i
nstrument   panel   then   operate   the   starter m

otor   by   turning   the   key   to   position 3
without
  pressing   the   accelerator   pedal,
 u

ntil   the   engine   starts.   Once   the   engine   is
 r

unning,   release   the   key.
If the engine does not start straight away,   switch   off   the   ignition.   Wait   a  
f

ew   moments   before   operating   the  
s

tarter   motor   again.   If   the   engine   does  
n

ot   start   after   several   attempts,   do   not  
k

eep   trying:   you   risk   damaging   the  
s

tarter   motor   or   the   engine.   Contact  
a

  CITROËN   dealer   or   a   qualified  
w

orkshop.
In
  wintry   conditions,   the   warning   lamp  
c

an   stay   on   for   a   longer   period.   When  
t

he   engine   is   hot,   the   warning   lamp  
d

oes   not   come   on. Never   leave   the   engine   running   in  
a

n   enclosed   area   without   adequate  
v

entilation:
 in
ternal
 c
ombustion
 e

ngines   emit   toxic   exhaust   gases,  
s

uch   as   carbon   monoxide.   Danger   of  
i

ntoxication   and   death.
In   very   severe   wintry   conditions  
(

temperatures   below   -23°C),   to   ensure  
t

he   correct   operation   and   durability   of  
t

he   mechanical   components   of   your  
v

ehicle,   engine   and   gearbox,   it   is  n
ecessary   to   leave   the   engine   running  f
or   4   minutes   before   moving   off.
In
  temperate   conditions,   do   not   leave  
t

he   engine   at   idle   to   warm   up   but   move  
o

ff   straight   away   and   drive   at   moderate  
s

peed.
5
Driving

66
C-elysee_en_Chap05_conduite_ed01-2016
Never switch off the ignition before the vehicle   is   at   a   complete   stop.   With   the  
e

ngine   off,   the   braking   and   steering  
a

ssistance   systems   are   also   cut   off:   risk  
o

f   loss   of   control   of   the   vehicle.
For
  more   information,   refer   to   the  
"

Practical   information"   section,   under  
"

Energy   economy   mode".
When
  you   leave   the   vehicle,   keep   the  
k

ey   with   you   and   lock   the   vehicle.
To
 
facilitate
 
unlocking
 
of
 
the
 
steering
 c

olumn,
 
it
 
is
 
recommended
 
that
 
the
 w

heels
 
be
 
returned
 
to
 
the
 
straight
 
ahead
 p

osition
 
before
 
switching
 
off
 
the
 
engine.
Switching off the engine
F Check   that   the   parking   brake   is   correctly  a
pplied,   particularly   on   sloping   ground.
F
 
S
top   the   vehicle.
F  
W
ith   the   engine   running   at   idle,   turn   the   key  
t

o position 1
.
F  
R
emove   the   key   from   the   ignition   switch.
F  
T
o   lock   the   steering   column,   turn   the  
s

teering   until   it   locks.
Energy economy mode
After switching off the engine (position 1- Stop
), f
or   a   maximum   of   30   minutes   you   can   still   use  
f

unctions   such   as   the   audio   and   telematic  
s

ystem,   the   wipers,   dipped   beam   headlamps,  
c

ourtesy   lamps,   ...
Key left in the "Ignition on"
position
On opening the driver's door, an alert message   is   displayed,   accompanied   by   an a

udible   signal,   to   remind   you   that   the   key   is
 s

till  
i
n  
t
he  
i
gnition  
s
witch  
a
t  
p
osition  
1
(Stop).
If the key has been left in the ignition s
witch at position 2 (Ignition on) ,
the
  ignition   will   be   switched   off  
a

utomatically   after   one   hour.
To
  switch   the   ignition   back   on,   turn   the  
k

ey   to   position   1 (Stop),
  then   back   to  
p

osition 2 (Ignition on) .
Driving

76
C-elysee_en_Chap05_conduite_ed01-2016
Invalid value during manual
operation
This symbol is displayed if a gear is   not   engaged   correctly   (selector  
b

etween   two   positions).
Stopping the vehicle
Before switching off the engine, you can engage   position   P or N   to   place   the   gearbox   in  
neu

tral.
In
  both   cases,   apply   the   parking   brake   to  
i

mmobilise   the   vehicle.
Operating fault
and a message in the multifunction screen, indicates   a   gearbox   fault.
In
  this   case,   the   gearbox   switches   to   back-up  
m

ode   and   is   locked   in   3rd   gear.   You   may   feel  
a

  substantial   knock   when   changing   from   P
to R
  and   from   N to R.
  This   will   not   cause   any  
d

amage   to   the   gearbox.
Do
  not   exceed   60   mph   (100   km/h),   local   speed  
r

estrictions
 p
ermitting.
Contact
  a   CITROËN   dealer   or   a   qualified  
w

orkshop   as   soon   as   possible. There
  is   a   risk   of   damage   to   the  
g

earbox:
-  i f   you   press   the   accelerator   and  b
rake   pedals   at   the   same   time,
-
 
i
f   you   force   the   movement   of   the  
s

elector   from   the   P position to
another position when the battery is
flat.
To
  reduce   fuel   consumption   when   at  
a

  prolonged   standstill   with   the   engine  
r

unning   (traffic   jam...),   put   the   selector  
i

n the N   position   and   apply   the   parking  
b

rake.
If the selector is not in position P ,
when
 
the
 
driver's
 
door
 
is
 
opened
 
or
 
a

pproximately
 
45
 
seconds
 
after
 
the
 
i

gnition
 
is
 
switched
 
off,
 
a
 
warning
 
m

essage
 
appears
 
in
 
the
 
screen.
F

R

eturn the selector to position P ;
 
t

he
 
message
 
disappears.
When
 
driving
 
on
 
flooded
 
roads
 
or
 
when
 
c

rossing
 
a
 
ford,
 
proceed
 
at
 
walking
 
p

ace. When
  the   ignition   is   on,   the  
l

ighting   of   this   warning   lamp,  a
ccompanied   by   an   audible   signal  
Driving