reset Citroen C1 2008.5 1.G Owner's Manual

1
17
INSTRUMENTS and CONTROLS
INSTRUMENT PANEL

1. Total/trip distance recorder zero
reset button

2. Warning lamps and indicators
display

3. Direction indicators

4. Speedometer

5. Fuel gauge
6. Total/trip distance recorder

7. Rear foglamp indicator lamp

8. Main beam headlamps indicator
lamp

9. Dipped headlamps indicator
lamp
REV COUNTER
Approaching the maximum engine
speed, when the rev counter needle
crosses into the red zone, you must
change up.

10. " SensoDrive" gearbox gear and
gear lever positions indicator

1
20
INSTRUMENTS and CONTROLS
DISPLAY SCREEN
To reset the trip recorder to zero,
when it is displayed, press and hold
button 1 . "SensoDrive" gearbox
indicator
Lever in EASY mode
(automatic mode)

"E" is displayed when this
operating mode is selected.
It is switched off on switching to manual
mode.
Lever in manual mode

"M" is displayed when this
operating mode is selected.
It is switched off on switching
to EASY mode.

"Neutral"


"Reverse"
Total/trip distance recorder
When the ignition is switched on,
the distance recorder selected when
the engine was switched off is dis-
played.
Press button 1 to alternate the dis-
tance display:
- total with "ODO" displayed,
- trip with "TRIP" displayed.

1
20
INSTRUMENTS and CONTROLS
DISPLAY SCREEN
To reset the trip recorder to zero,
when it is displayed, press and hold
button 1 . "SensoDrive" gearbox
indicator
Lever in EASY mode
(automatic mode)

"E" is displayed when this
operating mode is selected.
It is switched off on switching to manual
mode.
Lever in manual mode

"M" is displayed when this
operating mode is selected.
It is switched off on switching
to EASY mode.

"Neutral"


"Reverse"
Total/trip distance recorder
When the ignition is switched on,
the distance recorder selected when
the engine was switched off is dis-
played.
Press button 1 to alternate the dis-
tance display:
- total with "ODO" displayed,
- trip with "TRIP" displayed.

3
36
COMFORT
FRONT SEATS 2. Seat back angle adjustment
Push control A rearwards while
adjusting the angle of the seat back.
3. Access to the rear seats
(3-door)
Position the seat belt along the door
pillar.
Push control A rearwards to fold the
seat back and move the seat forwards.
To put the seat back in place, push the
seat back until the seat locks.
Reset the forwards-backwards
adjustment of the seat and the seat
back angle.
1.
Forwards-backwards
adjustment
Raise the control and slide the seat
forwards or backwards.
No person or object must
prevent the seat from returning
to the required position.