fold seats CITROEN C3 2009 Owners Manual

3
COMFORT
REAR SEATS
Bench seat with fi xed one-piece cush-
ion and split backrest (left hand 2/3,
right hand 1/3) which can be folded in-
dividually to adapt the load space in the
boot.
Rear head restraints
These have a high position (comfort)
and a low position (rear visibility). Folding the backrest

 Move the corresponding front seat
forward if necessary.

 Check that the seat belt is positioned
correctly on the side of the seat back.

 Place the head restraints in the low
position.
Repositioning the seat backrest
When repositioning the rear seat backrest:

 Straighten the seat back 2 and se-
cure it.

 Check that the red indicator, located
next to the control 1 , is no longer vi-
sisble.
They can also be removed.
To remove a head restraint:

 release the backrest using control 1 ,

 tilt the backrest 2 slightly forwards,

 pull the head restraint upwards to
the stop,

 then, press the lug A .
When repositioning the seat
backrest, take care not to trap
the seat belts.
Never drive with the head re-
straints removed; they must be
in place and correctly adjusted.
 Pull control 1 forwards to release
the seat back 2 .


Fold the seat back 2 on to the cushion.