headlamp Citroen C3 PICASSO 2008.5 1.G User Guide

i
118
PRACTICAL INFORMATION Changing integrated direction
indicator side repeaters
Contact a CITROËN dealer to obtain re-
placement repeaters.

 Insert a screwdriver on the edge of
the repeater.

 Tilt the screwdriver to extract the re-
peater and remove it.

 Disconnect the repeater connector.
When removing:
- be careful not to damage the paint- work of your vehicle with the screw-
driver,
- do not allow the wire and the con- nector to slide inside the wing.
To refi t, carry out these operations in re-
verse order.

Changing main beam headlamp
bulbs

 Remove the protective plastic cover
by pulling on the tab.

 Disconnect the bulb connector.

 Move the springs to release the
bulb.

 Remove the bulb and change it.
To refi t, carry out these operations in re-
verse order.
Changing side light bulbs

 Remove the protective plastic cover
by pulling on the tab.

 Pull the bulb-holder.

 Remove the bulb and replace it.
To refi t, carry out these operations in re-
verse order.
Changing dipped headlamp bulbs

 Remove the protective plastic cover
by pulling on the tab.

 Turn the bulb-holder by a quarter
turn.

 Remove the bulb and change it.
To refi t, carry out these operations in
reverse order.
If you experience any diffi culty
in replacing bulbs, contact your
CITROËN dealer.